The Datec KNX/DALI Actuator 1x 8 Outputs is a device for controlling and monitoring up to 8 DALI ballast. Each lamp may also be controlled manually using the buttons on the device. Part of the monitoring is directly visible on the device itself. This is useful for commissioning lamps and test the installation even without KNX Programming. KNX bus Power is sufficient for this purpose. 

• Control up to 64 DALI individual lights and 16 DALI groups
• Full functionalities for each light:dimming, switching on/off, setting brightness values, light scenes and failure feedbacks
• DALI addressing and commissioning functions: off-line and on-line modes
• On-line test functionalities for individual light localization and check
• Possibility to control DALI emergencies (extended parameters) 

It is a gateway to control lights with DALI protocol in a similar way to any KNX dimmer. It allows to control up 64 DALI ballasts in three channels with broadcast commands, that is, all of them simultaneously per channel.It includes an integrated power supply to feed the DALI, it also has 3 input to control the channel by conventional pushbuttons and the possibility to configure up to 16 scenes.  

The ABB i-bus  DALI-Gateway DG/S 8.1 is the link between DALI equipment and the KNX. 8 DALI outputs (channels) can be connected to the DALI- Gateway DG/S 8.1 with a maximum of 16 per channel. Up to 128 devices with a DALI interface can be connected to the DALI Gateway.    

It is DALI Single-Master Controllers to DALI standard EN 62386 ed/1 and ed/2. A DALI gateway provides the interface between the KNX installation and the DALI lighting control. Up to 64 DALI devices can be connected. These 64 devices can be controlled in broadcast, individually or in a DALI group.Each device or group can be independently switched, dimmed and assigned a brightness value via the KNX

It is DALI Single-Master Controllers to DALI standard EN 62386 ed/1 and ed/2. A DALI gateway provides the interface between the KNX installation and the DALI lighting control. Up to 64 DALI devices can be connected to each output.These 64 devices can be controlled in broadcast, individually or in a DALI group.Each device or group can be switched, dimmed and assigned a brightness value via the KNX 

For switching and dimming of 16 independent lighting groups. A maximum of 64 DALI devices can be connected. The device can be used for 8-fold constant lighting control in connection with eight Light Sensors LF/U 2.1. Fault feedback messages can be programmed and activated via KNX. With comfortable manual operation and status display.  

Up to 64 DALI devices connectable to DALI Bus (electronic ballast, LED driver, ECK)

Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)

16 DALI Groups and 64 different lighting scenes

Each DALI group configurable to function as constant light, corridor or sequence function

Functional and battery life tests for DALI compliant emergency lighting fixtures to be sent through KNX

Monitoring Fault status of DALI devices as different KNX group objects

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE DI INSTALLAZIONE

Download SOFTWARE DALI TOOL

Download DATABASE ETS

Up to 64 DALI devices connectable to DALI Bus (electronic ball st, LED driver, ECK)

Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)

16 DALI Groups and 64 different lighting scenes

Each DALI group configurable to function as constant light, corridor or sequence function

Functional and battery life tests for DALI compliant emergency lighting fixtures to be sent through KNX

Monitoring Fault status of DALI devices as different KNX group objects

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE DI INSTALLAZIONE

Download SOFTWARE DALI TOOL

Download DATABASE ETS

The Datec KNX/DALI Actuator 1x 8 Outputs is a device for controlling and monitoring up to 8 DALI ballast. Each lamp may also be controlled manually using the buttons on the device. Part of the monitoring is directly visible on the device itself. This is useful for commissioning lamps and test the installation even without KNX Programming. KNX bus Power is sufficient for this purpose. 

The KNX/DALI gateway can connect up to 32 DALI devices. Each DALI device can be switched, dimmed or set brightness value via a communication object. The DALI address assignment of 32 devices is implemented automatically or manually by the DALI Gateway, meanwhile, a DALI software tool is provided, which is used to modify the DALI devices address and test DALI devices etc.