The 640mA power supply EIB produces and monitors the voltage for the KNX system.

The connection to the bus line takes place via a red/black terminal.

Also the bus line is decoupled from the p. supply with the integrated inductance.

Furthermore 640mA power supply EIB KNX is equipped with an auxiliary voltage of 30Vdc.

Also through the additional yellow/white connection terminal it powers the devices that need an additional voltage.

A status led indicates the correct functioning of the 640mA power supply EIB KNX.

4 modules DIN rail mounting.

The p.s. must be connected to the 230V p. line for correct operation.n.

Power Supply KNX max Curr ent 640mA. Input Voltage 230/110 VAC – 50/60Hz. Power Supplies generate the KNX system voltage (SELV). For this purpose, 3 different models have been developed considering the needs. Main differences between models are power consumptions and rated currents. The bus line is decoupled from the power supply by an integrated choke. The two color LED indicates device output status.

Power Supply KNX max Current 320mA. Input Voltage 230/110 VAC – 50/60Hz.

Power supply provides 29Vdc and have an auxiliary output available (also 29VDC voltage). All versions have KNX bus connection terminal (l1: black/red) and auxiliary connection terminal (l2: yellow/white). Main output and auxiliary output (I1+I2) cannot overcome the nominal current. 

Power supply provides 29Vdc and have an auxiliary output available (also 29VDC voltage). All versions have KNX bus connection terminal (l1: black/red) and auxiliary connection terminal (l2: yellow/white). Main output and auxiliary output (I1+I2) cannot overcome the nominal current.   

640mA Bus Power Supply 365 (AUX 30V) Modular 640mA line power supply with integrated isolation coil. The 640mA Bus Power Supply 365 (AUX 30V) can be installed in distribution boards on DIN rails with EIB / KNX bus connection terminal. Power Supply 365 is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA Bus Power Supply 365 (AUX 30V) has a built-in bus choke and also provides an output for the 30V auxiliary power supply. Three multicolored LEDs on the front indicate the conditions of the Power Supply 365 device. They signal overload with warning, temperature exceeding, telegram traffic and reset status. On 640mA The two buttons allow you to reset the KNX line.

Power Supply KNX max Current 320mA. Input Voltage 230/110 VAC – 50/60Hz.

EAE KNX Power Supply - 640 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

640mA BUS Power Supply DGS 366 (AUX 30V) is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA BUS Power Supply DGS 366 (AUX 30V) device has a bus choke and also provides an output for the auxiliary power supply. The integrated KNX node on the 640mA power supply monitors the output current, the bus voltage and the temperature in the switchboard. 640mA BUS Power Supply DGS 366 (AUX 30V) has several logic functions which are available for application purposes. The configuration of BUS DGS is done with the ETS (version 4.2 or later). An easy-to-read front panel OLED display on the DGS BUS allows the user to view operating parameters locally on the device.

EAE KNX Power Supply - 320 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.

The KNX POWER SUPPLY 640mA is a DIN Rail mounted KNX device with integrated choke, to directly power a KNX line. An auxiliary 30V output is available for some extra loads, as displays, binary inputs, …