USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.
Sensors
Descrizione mancante
Presence detector with radio- frequency technology for hidden installation. 360º detection through non-metallic surfaces for installation in technical and false ceilings.Safe against sabotage and non- desired manipulation due to its hidden installation. Suitable for lighting, motion detection, intrusion control, etc.
The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.
-
Wireless wall-mounted Infrared PIR motion detector for lighting control.
-
Built-in light sensor, allowing to limit the operation of the detector to daylight.
-
As soon as it detects movement, the sensor sends the ON signal to the linked receiver and itscontact keeps closed. The ON time must be set on the receiver.
-
Wall or ceiling mounting installation.
-
Coverage: 180º and Ø10m at 2m high.
-
Power Supply: 2 x 3V AA Lithium batteries L91. Working life over 15 years.
-
Radio-frequency: 868,4MHz.
-
Range: up to 100m (in the free field).
-
Compatible with: IT KNX 001, MI KNX 001 & CO KNX 002.
- Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
- Built-in light sensor, allowing to limit the operation of the detector to daylight.
- It has 2 operation modes:
· Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 & CO KNX 002.
· Presence detector: useful for heating and air conditioning control. - Compatible with the actuators: TM KNX 001 & CO KNX 002.
- Incorporates Temperature sensor
- Coverage: 360º and Ø7m at 2,5m high.
- Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
- Radio-frequency: 868,4MHz.
-
Wireless Luminosity sensor transmitter for daylight control.
-
It is designed for the automatic control of lighting depending on the natural light.
-
It sends the existing brigthness value to the lighting actuator for constant light control operation.
-
Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
-
Dimensions: 78 x 28 x 23mm.
-
Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.
High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls.
Infrared presence detector Presence Control PRO IR Quattro HD KNX for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses,installation height up to 10 m,controll 4 lighting channels and HVAC,4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone.
IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m
IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m
It is possible to adjust the presence sensor sensitivity in an easy way,selecting between 3 different levels or personalizing by yourself.It includes parameters to define regulation steps,to establish deviations, or to calibrate it.It is also possible to change between auto and manual mode, defining the behavior when it changes between those two options.It also includes an additional thermostat