Home Domo Energy

Home Domo Energy

New products

New products

Blog Categories

Blog Categories

LoRaWAN Solutions %separator% Agri 2.0 %separator% industry 4.0 %separator% Metering

LoRaWAN

LoRaWAN Solutions for Smart City, Smart Metering, Smart Lighting, Smart Agriculture, Smart Office, Smart Building.Our range of LoRaWAN solutions is the result of our know-how in selecting the best wireless IoT manufacturers. All solutions are compatible with LoRaWAN (Long Range Wide-Area Network). This protocol allows very long range communications combined with low power consumption. With high quality and high performance, they are ideal for various application scenarios. Leveraging LoRaWAN technology, the proposed gateways are ideal for interconnecting and forwarding messages between various sensors and network servers. All devices are configured to transmit efficiently and reliably. The industry's most compatible, manageable, and scalable gateways for many IoT applications.

Active filters

  • 1 Review(s) 

    Environmental Noise Sensor...

    €365.00
    • Range is 30dB~120dB;Sensitivity: ±0.5db
    • The sensitivity of NB-IoT module is 129 dBm±1 dB, excellent penetration, the network coverage is 20dB stronger than GSM, LTE and other networks.
    • Support the communication protocol frequency band published by the international organization agreement 3GPP.
    • Support two kinds of configuration for data transmission.Single-tone transmission,15kHz/3.75kHz Subcarrier interval:25.2kbps(Downlink) , 15.625kbps(Uplink);Multi-tone transmission, 15kHz Subcarrier interval:25.2kbps(Downlink),54kbps(Uplink)
    • Switch freely between Active/Idle/PSM modes, and ensure that the un-received data is retransmitted.
    • Support IPv4/IPv6/UDP/CoAP/LwM2M/Non-IP/DTLS/TCP/MQTT protocol stack.
    • Intelligent terminal provides multi-function interface (MPI), it can be connected with external analog and digital quantity sensors. 
    • Integrated internal antenna or optional external SMA/IPEX antenna.
    • OTA firmware upgrade, including to upgrade loader and application images
    • Support wide voltage 5~12V DC input, 5 – 10 years of battery operational life with 2 x AA Li-SOCI2 Battery.
    • IP67 enclosure rating. 
    • When ordering, specify the LoRaWAN or NB-IOT version

    OUTDOOR version available on request.

  • 1 Review(s) 

    Heat-LoRa Metering...

    €245.00

    Heat-LoRa Metering Ultrasonic DN15 is an innovative heat meter with static flow sensor based on the ultrasonic measuring principle with LoRaWAN technology. The Heat-LoRa Metering is designed to measure heat usage where water is the hot/cold carrier medium. Heat-LoRa meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the input and output of the system.Heat-LoRa Metering Ultrasonic also available in the DN20-25-32-40 version

    • Pipe diameter : DN15
    • Minimum flow rate, qi (m³/h) : 0.02
    • Permanent flow rate, qp (m³/h) : 1.5
    • Maximum flow rate, qs (m³/h) : 3.0
    • Connection : G3/4'
    • Length (mm) : 110
    • Width (mm) : 96
  • 1 Review(s) 

    Electricity-LoRa Three...

    €215.00

    Electricity-LoRa Three Phase Meter 1/5A CT MID is an advanced multifunctional three-phase energy monitoring solution, with an integrated LoRaWAN module. The Three-Phase Meter transmits data wirelessly to any LoRaWAN gateway. Electricity-LoRa measures and displays the characteristics of three-phase three-wire (3p3w) and three-phase four-wire (3p4w) systems. The LoRaWAN MID Counter displays the parameters: KWh, kVArh, kW, kVAr, kVA, PF, Frequency, Voltage, Current, dmd. THD etc. Energy is measured in terms of kWh, kVArh. The maximum required current can be measured over preset periods of up to 60 minutes. The required current inputs are obtained via current transformers (CTs). Electricity-LoRa Three Phase Meter 1/5A CT MID can be configured to operate with a wide range of CTs, giving the unit a wide range of operations. The configuration is password protected.

  • 1 Review(s) 

    LoRa-Water Metering...

    €245.00

    LoRa-Water Metering Ultrasonic & Valve Control is an ultrasonic water meter with LoRaWAN technology. Provides an all-in-one smart water meter solution, offers measuring range ratio up to R400 (Q3/Q1). LoRa-Water Metering Ultrasonic & Valve Control is far better than the standard mechanical water meter. LoRa-Water Metering allows remote control of the valve to block the flow of water. The Ultrasonic Meter is designed for indoor installation in non-condensing environments with ambient temperatures from 5~55°C. The Valve Control meter has IP68 protection class which allows for long term submersion. Make sure that the meter is installed far enough away from possible sources of electromagnetic interference (switches, electric motors, fluorescent lamps, etc.). LoRa-Water Metering Ultrasonic & Valve Control Also available in the DN20 version

    • Minimum Flow Rate, Q1 (m3/h) @R400 : 0.00625
    • Permanent Flow Rate, Q3 (m3/h) : 2.5
    • Connection : G3/4'
    • Length (mm): 165
    • Width (mm) : 90
    • Height (mm) : 103
    • Flow Meter Connector : R1/2'
  • 1 Review(s) 

    SPD 20 KV & 10KA...

    €15.00 -20% €12.00
  • 1 Review(s) 

    IoT-LoRa Controller UC300

    €140.00

    IoT-LoRa Controller UC300 is used for remote control and data acquisition from different devices. The Controller UC300 controller contains multiple I/O interfaces. IoT-LoRa Controller has analog input, digital input, relay output, serial port, PT100RTD input. The inputs of the IoT-LoRa Controller UC300 support remote device data transmission via LoRaWAN. UC300 LoRaWAN supports multiple trigger conditions and actions that can work autonomously. The automations are guaranteed even in the event of a grid failure. Combined with Milesight IoT Cloud solution, it can easily monitor and control remote devices via web server or mobile app. IoT-LoRa Controller UC300 features industrial design and IP30 metal case. UC300 is widely used in building automation, industry 4.0 etc applications

  • 1 Review(s) 

    HCHO & Environmental...

    €350.00

    HCHO & Environmental Monitoring The AM300 Series Indoor E-Ink Display is a compact sensor for indoor use. The Environmental Sensor measures weather parameters such as temperature, humidity, light, barometric pressure. AM300 also detects the concentrations of volatile organic compounds CO2, level of HCHO / O3, TVOC, PM2.5, PM10. Finally, for a complete monitoring of the environment, it is equipped with Pir to detect the presence in the environment. The data will be displayed on the E-ink screen in real time, which helps to measure the indoor environment and comfort. AM300 series is widely used for office, shop, classroom, hospital, etc. Data from the HCHO sensor & E-Ink Display Environmental Monitoring is transmitted using LoRaWAN technology. By combining the Milesight LoRaWAN gateway and Milesight IoT Cloud, users can manage all sensor data remotely and visually.

    Last items in stock
  • 1 Review(s) 

    Repeater-LoRa Spider Bridge...

    €185.00

    Repeater-LoRa Spider Bridge Relay is a LoRaWAN repeater for Ultrasonic Water Meter. The Repeater-LoRa is used to solve the communication problem between terminal devices and LoraWAN gateways. The Spider Bridge Relay works as an intermediary when the installation scenario is complicated by increasing the extension of the coverage range. The Repeater-LoRa Spider Bridge Relay can manage up to 15 devices. It is equipped with replaceable battery power supply and with integrated high-performance antenna. IP67 degree suitable for pole or wall installation. Support OTA update

  • 1 Review(s) 

    MID Smart Meter X96-5J...

    €225.00

    The X96-5J multifunction energy analyzer is a new generation intelligent panel meter with integrated RS485 Modbus RTU and Ethernet TC / IP communication interfaces. Equipped with digital inputs and outputs for the reception of external signals and it is possible to set the alarms up to 30 parameters.The unit can be used as a gateway for Modbus RTU / TCP. SMART X96 measures and displays the characteristics of the 1p2w, 3p4w and 3p3w, including voltage, frequency, current, power and active and reactive energy, imported or exported, harmonic, power factor, max. Question etc. Energy is measured in terms of kWh, kVArh and kVAh. The maximum required current can be measured over preset periods of up to 60 minutes.

    • Multiparametric measurements
    • Up to 63rd THD and IHD
    • RS485 Modbus RTU
    • TCP Ethernet gateway
    • Multiple rates
    • Digital input / output
    • Accuracy class 0.5 seconds
    • Bar graph for power indication
    • Backlit LCD display for full viewing angles
    • Push-in installation and plug-in connection
    Last items in stock
  • 1 Review(s) 

    Multiple Smart Ambience...

    €144.00
    Last items in stock