ABB EIB / KNX IP Router (2 DIN)
IPR/S 2.1
New product
The IP Router IPR/S 2.1 connects the KNX bus with the Ethernet network. KNX telegrams can be sent to or received from other devices via the network.The IP Router in addition to the tunnelling function for point-to-point communication, also incorporates the functions of a line coupler (routing).
he IP Router 2.1 is a modular installation device (MDRC) and forms the interface between KNX installations and IP networks. It can be used as a fast line and area coupler and can utilise the local network (LAN) for fast exchange of telegrams between the lines/areas.The IP address can be fixed or can be received from a DHCP server. The power supply range is from 10 to 30 V DC
It has 3 mode use :
- The IP Router IPR/S can be used together with the ETS as a programming interface. The device provides an additional physical address for this purpose which can be used for a tunnelling connection, e.g. for ETS.
- The IP Router in a KNX system can assume the function of an area coupler. For this purpose it must receive the physical address of an area coupler (1.0.0…15.0.0).
- The IP Router in a KNX system can assume the function of a line coupler. For this purpose it must receive the physical address of a line coupler (1.1.0…15.15.0).
IPR/S 2.1
New product
The IP Router IPR/S 2.1 connects the KNX bus with the Ethernet network. KNX telegrams can be sent to or received from other devices via the network.The IP Router in addition to the tunnelling function for point-to-point communication, also incorporates the functions of a line coupler (routing).