GVS EIB / KNX Dali Gateway (4 DIN) BTDG-01/00.2
BTDG-01/00.1
Nuovo prodotto
The KNX/DALI gateway can connect up to 32 DALI devices. Each DALI device can be switched, dimmed or set brightness value via a communication object. The DALI address assignment of 32 devices is implemented automatically or manually by the DALI Gateway, meanwhile, a DALI software tool is provided, which is used to modify the DALI devices address and test DALI devices etc.
Personalizzazione del prodotto
Non dimenticare di salvare la tua personalizzazione per poter riempire il carrello
The KNX/DALI gateway as an interface device, can convert the telegrams from KNX bus into the information that DALI devices can recognize, which includes DALI device address and control command, and send the information to DALI network and control DALI devices e.g. switching, dimming , scene etc. The gateway can also detect fault of DALI device, and feed back the fault information to KNX bus
Power Supply: 21~30V DC, bus powered
Current: <12mA
Power comsuption: Max. 360mW
Installation: on 35 mm DIN rail
Temperature Range: Operation -5℃ ~ 45℃ Storage -25℃ ~ 55℃ Transport -25℃ ~70 ℃
Outputs: AC 100~240 V 47~63 HZ
FUNCTIONS:
> individual control up to 32 DALI slave devices.
> switching function.
> control intensity values of the lamp.
> relative dimming function.
> 16 scenes setting.
> radio control DALI slave devices.
> up to 16 groups control DALI devices in the channel.
> DALI device statue detection.
> operating status and brightness value report.
> staircase lighting function.
BTDG-01/00.1
Nuovo prodotto
Potrebbe anche piacerti
-
![EIB / KNX Alimentore di Linea 640 mA]()
- In saldo!
-
![EIB / KNX USB interface]()
-
![EIB / KNX Bus Cable Green]()
- In saldo!
The KNX/DALI gateway can connect up to 32 DALI devices. Each DALI device can be switched, dimmed or set brightness value via a communication object. The DALI address assignment of 32 devices is implemented automatically or manually by the DALI Gateway, meanwhile, a DALI software tool is provided, which is used to modify the DALI devices address and test DALI devices etc.