It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

• Up to 48 telegrams/second routing performance
• Up to 35 telegrams/second tunnelling performance
• Up to five KNXnet/IP tunnel connections
• Integrated display
• 10/100 MBit Ethernet interface
• Power over Ethernet or ext. 16-24 AC or 20-30V DC
• Battery buffered RTC
• SNTP server
• Telnet server

• • Up to 48 telegrams/second routing performance
  • Up to 35 telegrams/second tunnelling performance
  • Up to five KNXnet/IP tunnel connections
  • Integrated display
  • 10/100 MBit Ethernet interface
  • Power over Ethernet or ext. 16-24 AC or 20-30V DC
  • Battery buffered RTC
  • SNTP server
  • Telnet server

IT is a bidirectional meter for measurement of active and reactive energy or power, respectively. Further it features an analysis of power supply quality.Measurements can be performed in a 3-phase system or in three independent 1-phase system.(current, voltage, active power, reactive power, active energy, reactive energy, power factor, THD-U, THD-I harmonics, unbalanced load, zero system current) 

voltage input: 230 V AC (50Hz)

output current: 960 mA

Integrated choke

LEDs for operation, bus reset and programming mode

Integrated bus-connection with voltage and current measurement

Data output on KNX bus via group object and visible on display

KNX objects for voltage, current and power measurements

KNX alarm functions

Housing temperature measurement

AUX with 600mA additional output

Alimentatore KNX 640mA DATEC 1630.02150/90100 DIN con Uscita Ausiliaria 30V.

English description pending.

Gateway Attuatore KNX/DALI da Incasso DATEC 1630.03140/70100 – 8 Canali UP.

English description pending.

Gateway Attuatore KNX/DALI DATEC 1630.04140/70100 – 8 Canali per Controsoffitto.

English description pending.

Wide apply in stadium,high-rise building,crane,pier,airport,hangar factory and other outdoor large area lighting fields.The super brightness led flood light is perfect replace 200W-300W HPS traditional light,energy save up to 50%.  

NK5025V15-A is a vandal-proof dome camera with IR illuminators, the camera adopts weather-proof and vandal-resistant housing design, withstanding harsh environments, this camera can be suitable for both indoor and outdoor installation for diversity of IP surveillance applications.  

NK4025D1-D is a vandal-proof dome camera adopts IP68 weatherproof and IK10 vandalproof design to effectively withstand harsh conditions - such as rain, dust, wind, sand, salt, extreme hot and cold temperature etc.can be suitable for any indoor and outdoor HDTV IP video surveillance applications including residences, offices, schools, libraries, churches, transportation etc.  

NS2025VB58 is a Full HD 1080p bullet type IP camera that utilizes Panasonic MN34229PL CMOS image sensor offering True-WDR function with 120dB wide dynamic range. This camera can deliver 2MP (1920x1080) resolution video with vivid color and superior image quality.  

The NS4025VB58 is  a high-end IP camera to deliver video streams with 4MP (2592x1520), 3MP (2048x1520), 1080P (1920x1080) resolution. This camera is based on OmniVision OV4689 1/3-type 4MP progressive CMOS image sensor and Hi3516D/A codec engine hardware design.   

NS5025VB58-A is a high-quality, high-performance 5MP Full HD Network IR Bullet Camera, it has a 1/1.8-inch progressive scan CMOS image sensor with IR-CUT filter built-in to capture the video. Thanks to its robust video encoding processor – Hi3516A, this camera can provide maximum 5MP@30fps video encoding, with three different compression standard (H.265/HEVC, H.264, MJPEG).     

Uscita Analogica KNX DATEC 1630.02131/57100 – 4 Canali 0-10V DIN per Valvole, Ventilazione e Motori.

English description pending.

EAE Room Control Unit RCU1212 – 12 Uscite 16A, 12 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

With unique high-brightness SMD chip,high-purity cooling-fin aluminum heat sink, high-efficiency constant current and constant voltage power driver,the LED Down Light is designed for Showroom, automobiles show, Business area,jewelry display, clothing store,supermarkets,museum,hotel, shop mall,exhibition halls,gallery and similar applications,etc.       

With unique high-brightness SMD chip,high-purity cooling-fin aluminum heat sink, high-efficiency constant current and constant voltage power driver,the LED Down Light is designed for Showroom, automobiles show, Business area,jewelry display, clothing store,supermarkets,museum,hotel, shop mall,exhibition halls,gallery and similar applications,etc.      

With unique high-brightness SMD chip,high-purity cooling-fin aluminum heat sink, high-efficiency constant current and constant voltage power driver,the LED Down Light is designed for Showroom, automobiles show, Business area,jewelry display, clothing store,supermarkets,museum,hotel, shop mall,exhibition halls,gallery and similar applications,etc.