The SDM230 series is an advanced single phase digital multifunction energy meter, measuring up to 100A of direct load. The unit measures active energy, reactive energy, current, voltage, power, power factor, frequency, demand, etc. Bi-directional metering makes this unit the ideal choice for solar photovoltaic metering. A remote communication port is provided, RS485 Modbus RTU and communication parameters are password protected in configuration mode. The user can check the data and set up the instrument via the buttons on the front panel. This series has been evaluated and certified as conforming to the requirements of the EC Directive 2004/22 / EC. The number of the EC type examination certificate is 0120 / SGS0206.

• MID B&D approved - 0120 / SGS0198
• Single phase (1P2W)
• Multifunction
• 100A AC
• 230V AC
• RS485 Modbus RTU
• Double pulse outputs
• 2 DIN module
• Backlit digital display
• 4 measurement modes for kW readings

The SDM530C is a three phase multi-function remote control energy meter. It measures all important electrical parameters, such as Active Energy (kWh), Current (A), Voltage (V), Frequency(Hz), Power Factor, Power Demand, import and export energy etc. With built-in relay inside, the meter can be remotely controlled to turn on or off the electricity supply via RS485. The user can also set alarm objects and alarm level, once the alarm is activated the relay will be turned off.

• Max.100A Direct Connect
• Multifunction Measurement, Displays Scrollable Settings
• Support AMR, SCADA system
• Remote Control with Bulit-in Realy
•  White Backlit LCD Display
• Din Rail Mounting 35mm

The SDM320C is a single phase multi-function remote control energy meter. It measures all important electrical parameters, such as Active Energy (kWh), Current (A), Voltage (V), Frequency(Hz), Power Factor, Power Demand, import and export energy etc. With built-in relay inside, the meter can be remotely controlled to turn on or off the electricity supply via RS485. The user can also set alarm objects and alarm level, once the alarm is activated the relay will be turned off.

• Max.100A Direct Connect
• Multifunction Measurement, Displays Scrollable Settings
• Support AMR, SCADA system
• Remote Control with Bulit-in Realy
•  White Backlit LCD Display
• Din Rail Mounting 35mm

The X96-5J multifunction energy analyzer is a new generation intelligent panel meter with integrated RS485 Modbus RTU and Ethernet TC / IP communication interfaces. Equipped with digital inputs and outputs for the reception of external signals and it is possible to set the alarms up to 30 parameters.The unit can be used as a gateway for Modbus RTU / TCP. SMART X96 measures and displays the characteristics of the 1p2w, 3p4w and 3p3w, including voltage, frequency, current, power and active and reactive energy, imported or exported, harmonic, power factor, max. Question etc. Energy is measured in terms of kWh, kVArh and kVAh. The maximum required current can be measured over preset periods of up to 60 minutes.

• Multiparametric measurements
• Up to 63rd THD and IHD
• RS485 Modbus RTU
• TCP Ethernet gateway
• Multiple rates
• Digital input / output
• Accuracy class 0.5 seconds
• Bar graph for power indication
• Backlit LCD display for full viewing angles
• Push-in installation and plug-in connection