LoRa-Water Metering Ultrasonic & Valve Control is an ultrasonic water meter with LoRaWAN technology. Provides an all-in-one smart water meter solution, offers measuring range ratio up to R400 (Q3/Q1). LoRa-Water Metering Ultrasonic & Valve Control is far better than the standard mechanical water meter. LoRa-Water Metering allows remote control of the valve to block the flow of water. The Ultrasonic Meter is designed for indoor installation in non-condensing environments with ambient temperatures from 5~55°C. The Valve Control meter has IP68 protection class which allows for long term submersion. Make sure that the meter is installed far enough away from possible sources of electromagnetic interference (switches, electric motors, fluorescent lamps, etc.). LoRa-Water Metering Ultrasonic & Valve Control Also available in the DN20 version

• Minimum Flow Rate, Q1 (m3/h) @R400 : 0.00625
• Permanent Flow Rate, Q3 (m3/h) : 2.5
• Connection : G3/4'
• Length (mm): 165
• Width (mm) : 90
• Height (mm) : 103
• Flow Meter Connector : R1/2'

Industry-LoRa Solenoid Valve Controller UC511 is a controller for solenoid valves. The UC511 Industry-LoRa Solenoid Controller is used to remotely control the valve's DC closing solenoids. The LoRaWAN Solenoid Valve Controller contains 2 solenoid interfaces and 2 GPIO interfaces, which can be easily controlled locally or remotely. In addition to the ultra-low power LoRaWAN technology, the UC511 Industry-LoRa Series Solenoid Valve Controller also features a built-in solar panel and high-capacity battery power supply for long-term operation. The Solenoid Actuator is for outdoor applications, features an IP67 rated enclosure and M12 connectors to protect it from water and dust in harsh environments.

AgRi-NPK LoRa Soil Sensor Detects the concentrations of nitrogen (NH2), phosphorus (H3PO4) and potassium (K) in the soil. These elements are necessary to evaluate the fertility status of the soil. The NPK sensor is suitable for all types of soil. This sensor can be buried long term with excellent resistance to electrolysis and corrosion. Furthermore, AgRi-NPK Soil Sensor is completely waterproof. AgRi-NPK LoRa Soil Sensor has the characteristics of a large measuring range, good linearity, convenient use, easy installation. Thanks to the LoraWAN transmission it allows a long distance signal coverage. The fields of application are innumerable: shed for greenhouses, flowers and vegetables. Also it can be used for grass pasture, quick soil measurement, vegetable cultivation.

• Temperature and humidity sensors： Temperature range - 40 ℃ ~ 125 ℃; Relative humidity 0~100%;Accuracy of + / - 3% RH;Corresponding time 8s;Working temperature and 40 ℃ ~ 125 ℃
• Light sensor: peak wavelength of 500 nm;Operating voltage 1.8v ~ 5.5v;Descending time 5ms;Rise time 5ms;Working temperature and 40 ℃ ~ 85 ℃
• Air pressure sensor: voltage of 2.1 V ~ 3.3 V.Current 2.5 mA;Range of 300 ~ 1100 hpa;115200 baud rates,
• Cross-threshold report, plus periodic report every 2 hours (the threshold and the periodic report cycle are both user-configurable)
• OTA (Over The Air) firmware upgrade, including to upgrade loader and application images
• Analog and digital interface for external sensor connectivity and pulse counting (MPI)
• Low power consumption, 5 – 10 years of battery operational life with 2 x AA Li-SOCI2 Battery
• Optional DC 5V power source
• Integrated internal antenna, or optional external SMA/IPEX antenna
• Up to 5km reach in NLoS (Non-Line-of-Sight) and up to 18km LoS (Line-of-Sight) environments
• IP67 enclosure rating
• When ordering, specify the LoRaWAN or NB-IOT version

The Ultrasonic Meteo LoRa Solar kit consists of a weather station, 20W solar panel, a 12Ah battery and pole bracket. The LoRa Solar Ultrasonic Meteo station detects 10 environmental parameters. The observation parameters of Ultrasonic Meteo LoRa Solar are PM10, PM2.5, wind direction and speed, temperature, humidity, atmospheric pressure, precipitation. Meteo Solar weather station can be used in urban environmental measurements, agricultural monitoring, industrial control etc..

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%
• PM10 0 to 1000ug / m3 1 ± 10%
• PM2.5 0 to 1000ug / m3 1 ± 10%
• Noise 30-130dB 0.1 ± 1.5dB

Smart Farm Weather 6 Sensor Solar

The Smart Farm Weather 6 Ultrasonic Sensors kit with 5W solar controller for power supply. The Smart Farm Weather controller is equipped with analog / digital inputs. The main observation elements of Smart Farm wind direction, wind speed, temperature, humidity, atmospheric pressure, precipitation. The Smart Farm Weather station can be used in urban environmental measurements, agricultural monitoring, industrial control etc.

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%

The AgriLoRa Meteo10 Solar Ultrasonic Sensors kit with 5W solar controller for power supply. The controller is equipped with analog / digital inputs. TThe measuse of  AgriLoRa Meteo10 Solar  are PM10, PM2.5. It also measures wind direction, wind speed, temperature, humidity, atmospheric pressure, precipitation. The AgriLoRa Meteo10 Solar station can be used in urban environmental measurements, agricultural monitoring, industrial control etc.

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%
• PM10 0 to 1000ug / m3 1 ± 10%
• PM2.5 0 to 1000ug / m3 1 ± 10%
• Irradiation from 0 to 2000W / m2 1W 5%
• Noise 30-130dB 0.1 ± 1.5dB