New products
New products
TRANSMITTERS / SENSORS
-
![DINUY One Channel interface 2-Fold Pushbutton]()
![]()
- -15%
DINUY RF One Channel...
€81.27 -15% €69.08- One channel interface for 2-fold pushbutton.
- Switch ON/OFF: Connects or disconnects the linked actuator. ON or OFF is sent depending on which of the two buttons is pressed.
- Dimmer: Connects, disconnects or dims the linked actuator. It sends ON/OFF or Dimming_Up/Dimming_Down depending on which of the two buttons is pressed the duration of the action.
- Blinds/Shutters: Controls a linked blind actuator. It sends Step_Up/Step_DOwn or Move_Up/Move_Down depending on which of the two buttons is pressed and the duration of the action.
- Scenes: Saves and recovers two different scenes (one scene in each button). It sends Scene_Save or Scene_Load depending on the duration of the action.
- Installaton in standard mechanism box, behind pushbutton.
- Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX DMS, RE KNX LE1 & RE KNX LE2.
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -15%
DINUY RF KNX TEMPERATURE...
€135.95 -15% €115.56- Wireless Temperature value transmitter.
- Sends the temperature value measured in the place when:
· The temperature value changes more than ±0,5ºC.
· 60 minutes after the last transmission.
· Pressing the inside link key. - Dimensions: 78 x 28 x 23mm.
- Portable or wall fix mounted.
- Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
-
![DINUY RF KNX 1 CHANNEL PORTABLE PUSHBUTTON]()
- -15%
DINUY RF KNX 1 CHANNEL...
€116.43 -15% €98.97- The 1-channel Pushbutton sends KNX telegrams when the button is pressed depending on its parameterisation through its switches.
- The device provides functions like switching or dimming of lighting, moving of blinds and shutters,managing scenes,…
- Dimensións: 78 x 28 x 23mm.
- Portable or wall fix mounted.
- Switch ON / OFF & Toggle: connects, disconnects or switches the linked actuator. It sends On / OFF / Toggle depending on the configuration.
- Dimmer: connects, disconnects or dims the linked actuator. It sends On / Off / Toggle or Dimming_Up / Dimming_ Down depending on the configuration.
- Blinds / Shutters: controls a linked blind actuator. It sends Step_Up / Step¨_Down or Move_Up / Move_ Down depending on the configuration.
- Scenes: saves and recovers one scene (0…4) depending on the configuration.
- Battery-operated: 2 x 3V Lithium batteries CR2025. Useful life higher than 8 years.
Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -15%
DINUY RF KNX TEMPERATURE...
€204.87 -15% €174.14- Wireless Temperature value transmitter.
- Sends the temperature value measured in the place when:
· The temperature value changes more than ±0,5ºC.
· 60 minutes after the last transmission.
· Pressing the inside link key. - Dimensions: 78 x 28 x 23mm.
- Portable or wall fix mounted.
- Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
-
![DINUY RF KNX Radio Remote Control 5 Channels 5 Scene]()
- -15%
DINUY RF KNX Radio Remote...
€176.65 -15% €150.15- The Radio Remote Control sends KNX telegrams when one of the keys is presse depending on its parameterisation.
- The KNX-RF hand-held remote control transmits KNX telegrams wirelessly when the key is pressed.These could include telegrams for switching, dimming, blind/shutter control or lighting scenes saving/recovering.
- Incorporates 5 independent channels, 1 main channel and 5 scene channels.
- Battery-operated: 1 x 3V Lithium battery CR2032. Useful life higher than 8 years.
- Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.
-
![DINUY RF KNX WIRELESS BRIGHTNESS SENSOR FOR SOLAR PROTECTION]()
- -15%
DINUY RF KNX WIRELESS...
€138.12 -15% €117.40- Wireless Luminosity value transmitter for Sun protection function.
- It is designed for the automatic control of shutters or blinds.
- According to the measured luminosity, it controls the raising or lowering of the shutters/ blinds to provide sun protection.
- Luminosity is measured by the sensor attached to the window with a sticker.
- Incorporates 4 different operation modes configurable by two small switches: Solar Alarm, Blind Control, Blind Control with manual lift and Lux Sensor.
- Dimensions: 78 x 28 x 23mm.
- Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
- Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: PE KNX 001 & CO KNX 002.
-
![DINUY RF KNX DOOR/ WINDOW SENSOR]()
- -15%
-
![DINUY RF KNX TEMPERATURE SENSOR SETTING KNOB]()
- -15%
DINUY RF KNX TEMPERATURE...
€138.89 -15% €118.06- Wireless Temperature sensor with desired temperature value control knob.
- This sensor sends the following variables:
· Measured temperature value.
· Temperature setpoint value.
· State (Standby or Auto). - Incorporates a wheel to set the desired temperature in the room.
- Battery-operated: 1 x 3V Lithium battery CR2450. Useful life higher than 8 years.
- Dimensions: 80 x 30 x 26mm.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
-
![DINUY RF KNX Temperature Sensor Probe Heating Floors]()
- -15%
DINUY RF KNX Temperature...
€157.39 -15% €133.78- Wireless Temperature sensor transmitter with Probe for heating floors.
- It sends the temperature value in the place where the probe is installed.
- Specially-indicated for underfloor heating installations.
- Includes the following components:
· Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
receiver.
· Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
waterproof. - The temperature value is sent every minute.
- Incorporates RF signal repeater function, which can be enabled or disabled as needed.
- Power supply: 230V~ 50Hz.
- Dimensions: 45 x 42 x 12mm.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -15%
DINUY RF KNX TEMPERATURE...
€115.96 -15% €98.57- Wireless Temperature value transmitter.
- Sends the temperature value measured in the place when:
· The temperature value changes more than ±0,5ºC.
· 60 minutes after the last transmission.
· Pressing the inside link key. - Dimensions: 78 x 28 x 23mm.
- Portable or wall fix mounted.
- Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
