- Up to 48 telegrams/second routing performance
- Up to 35 telegrams/second tunnelling performance
- Up to five KNXnet/IP tunnel connections
- Integrated display
- 10/100 MBit Ethernet interface
- Power over Ethernet or ext. 16-24 AC or 20-30V DC
- Battery buffered RTC
- SNTP server
- Telnet server
Active filters
-
- Up to 48 telegrams/second routing performance
- Up to 35 telegrams/second tunnelling performance
- Up to five KNXnet/IP tunnel connections
- Integrated display
- 10/100 MBit Ethernet interface
- Power over Ethernet or ext. 16-24 AC or 20-30V DC
- Battery buffered RTC
- SNTP server
- Telnet server
- Voltage: 24 V DC via KNX BUS
- typ. power input: 7 mA
- Detection area: vertical 360°
- Range:
max. Ø 24 m across
max. Ø 8 m towards
max. Ø 6,4 m smaller movements - Recommended mounting height: 2.5 m
- Degree / class of protection: IP20 / Class II
- Ambient temperature: -25 °C to +55 °C
- Housing: Polycarbonate, UV-resistant
- Brightness set value: 5 - 1200 Lux
voltage input: 230 V AC (50Hz)
output current: 960 mA
Integrated choke
LEDs for operation, bus reset and programming mode
Integrated bus-connection with voltage and current measurement
Data output on KNX bus via group object and visible on display
KNX objects for voltage, current and power measurements
KNX alarm functions
Housing temperature measurement
AUX with 600mA additional output
The KNX POWER SUPPLY 640mA is a DIN Rail mounted KNX device with integrated choke, to directly power a KNX line. An auxiliary 30V output is available for some extra loads, as displays, binary inputs, …
PD100 KNX presence detector is used in indoor spaces with integrated light sensor to achieve presence detection and constant light functions in a single device.
- Flush or surface mount options
- 6m in diameter movement detection at 2.5 m assembly height
- Integrated light level sensor and movement sensor to achieve constant light function
- Possibility to control air conditioning and ventilation through HVAC
- Adjustable brightness level and duration for “Movement”, “After Movement”, and “No Movement” functions
- Two constant light level adjustments for two states: Vacant & Occupied
- Ability to send movement status periodically with a separate communication object
- Feature to operate as a single sensor when connected with other KNX presence sensors
- Test and calibration modes for convenience during installation
- Does not require an external power supply
Download DATASHEET
Download MANUALE PRODOTTO
Download MANUALE INSTALLAZIONE
Download DATABASE ETS
The KNX USB interface ITR901-003 provides a galvanic isolated bidirectional connection to the bus system via KNX TP and USB. Network configurations become less time-consuming. The device is supplied by both the KNX TP line and USB. No additional external power supply is necessary.
Download DATASHEET
Presence detector with radio- frequency technology for hidden installation. 360º detection through non-metallic surfaces for installation in technical and false ceilings.Safe against sabotage and non- desired manipulation due to its hidden installation. Suitable for lighting, motion detection, intrusion control, etc.