KNX building automation is the automation of functions relating to electrical and technological systems. The KNX building automation system guarantees the best performance of the system in terms of safety, comfort and energy efficiency. Moreover building automation reduces operating times by modulating the power actually absorbed by adopting control strategies. Through KNX allows for scheduling, occupancy, gain, zoning. Furthermore, integrating, remoting, metering allow to reach a high degree of energy efficiency. Futhermore the bilding automation system is used in residential, tertiary, commercial, artisanal and public utility applications.
Active filters
Compact KNX actuator: 1 relay output 230V~/16A + 2 binary inputs galvanically isolated. KNX replacement for impulse switches. KNX Security. 1 DIN module. Art. 5327.
Compact KNX switching actuator with 2 bistable relay outputs 250V~/10A. Staircase function, heating actuator, integrated logic, KNX Security. 1 DIN module (18 mm). Art. 5444.
The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode. EnOcean Secure can be enabled via pressing a key combination. By configuration with the ETS® the push button switches to KNX RF mode with optional support of KNX Data Security. Via a factory reset the device can be switched back to EnOcean protocol.
The Blind Actuator KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked. The inputs Blind Actuator KNX IO 520 (1J2I) can be connected to conventional switches with an external voltage of 12 to 230 V. In the not configured state the binary inputs control the actuator channel. Via commissioning the device using ETS® software the binary inputs can be used independently. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output and input channels the Blind Actuator KNX IO 520 (1J2I) includes 16 independent functions for logic or timer control.
The Universal dimming actuator KNXIO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs. The dimming actuator supports phase control or phase section and is thus suitable for all dimmable 230 V lamps (eg incandescent lamps, dimmable LED lamps, halogen lamps). The dimming channel offers various comfort functions, including scenes, automatic, snooze function, staircase lighting and sequencer.The inputs of Universal dimming actuator KNXIO 530 (1D2I) can be controlled via conventional switches with an external voltage of 230 V. In addition to the output and input channels, the Universal dimming actuator KNXIO 530 (1D2I) contains 16 independent logic or timer functions. Two buttons and three LEDs on the front of the device allow local operation and visualization of the device status.
Bidirectional KNX gateway for Daikin Sky & VRV. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKV001.
Bidirectional KNX gateway for Daikin Split. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKS001.
Bidirectional KNX gateway for Gree VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXGRV001.
Bidirectional KNX gateway for LG VRV systems. 16 math logic units, 3 A/D inputs, OTA firmware, vertical vane control, Scene & Timer modules, BMS integration. Ref. HTKNXLGV001.
Bidirectional KNX gateway for Mitsubishi Electric CN105 (split/multi-split). 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV002.
Bidirectional KNX gateway for Mitsubishi Electric TB15. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV001.
Bidirectional KNX gateway for Mitsubishi Heavy Industries VRF. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMHV001.
Bidirectional KNX gateway for Toshiba VRF & Digital systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXTOV001.
It is a flush mounted device,for ceiling fan applications in offices, hotel rooms..It is used for varying ceiling fan speed as determined by KNX input or control systems.Also,speed can be varied by push buttons directly connected to the MOTOR CONTROL device.The ceiling fan must be of standard motor type, without control electronics. If using multiple speed fans, always force fan in max speed.
Bidirectional KNX gateway for Samsung NASA with individual control of up to 16 indoor units. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXSMS001.
Universal KNX infrared gateway with bidirectional synchronisation. 64 IR codes, 3 physical IR outputs, 8-step macros, dedicated AC module, 8 math logic units, KNX Data Secure. Ref. HTKNXIRC001.
Bidirectional KNX gateway for Midea Commercial & VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXMDVxx2.
With the Analog Input Adpater you can connect music sources to certain trivum SoundSystems. The SoundSystem can be far away from the music source, because the adapter used a CAT5/6 cable to transfer the music signal to the SoundSystem.
A 3.5mm stereo jack socket is used for connection.
The SoundSystem must have a trivum AudioBus socket as input. The products RP311 and RP341 are prepared for this.
DIN rail power supply for the trivum REG music actuators.
Voltage: 24V
Power: 100 watts
The RP340 and RP341 require 2 power supplies. For RP010, RP310 and RP311 and RA410 one power supply each.
The SCW speaker has a significantly reduced installation depth of only 80 mm.The SCW165-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The SCW165-S has a high, short-term peak power capacity of 2x 90 watt.With its efficiency factor of 92 dB/W the SCW165-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The SCW165-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.
The CW130-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The CW130-S has a high, short-term peak power capacity of 2x 75 watt.With its efficiency factor of 90 dB/W the CW130-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The CW130-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.
With 7" TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 7" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.
Including built-in box (cod 500016)
The RA410 is a flexible universal amplifier for the DIN rail.
The RP010 is streamer and central unit in one. As the smallest model of our REG line it is a complete system. Connect an external amplifier or active speakers, use the trivum SmartPhone App and listen to AirPlay, Spotify, TuneIn and more with the RP010. The small RP010 contains a complete SoundSystem and more.
The RP341 is a 4-way amplifier with one streamer, one FM tuner and one line input. Independent for 1-5 rooms or in combination with other trivum SoundSystems for up to 64 rooms.
The RP340 is a 4-way amplifier, streamer and central unit in one. Independent for 4 rooms or in combination with other trivum sound systems for up to 64 rooms.
The RP310 is an amplifier, streamer and central unit in one. As a complete sound system for one room, it finds its place in the control cabinet. Connect loudspeakers, network and power and immediately the modern SoundSystem is ready to play music via Smartphone App.
The RP311 is an amplifier, streamer, radio and central unit in one. Independent for 1 to 2 rooms or in combination with other trivum SoundSystems for up to 64 rooms.
Thanks to our intuitive app, the system is very easy to use - on smartphones as well as in a web browser or on the trivum TouchPads. Thanks to the trivum t3OS operating system, the trivum SoundSystems are both simple and very flexible. It contains many additional functions that make the RP311 a powerful central unit in any home.
The trivum InStreamer adds another audio source to your trivum multiroom system. An external audio source, like a CD- or record player, can be connected via analog RCA or digital TOSLINK cable to the InStreamer. On the other hand, the InStreamer is connected via Cat-5 Ethernet cable to your LAN and will be automatically detected and integrated into your trivum system.The InStreamer is automatically detected, as soon as it is connected to the network. All master devices will then have access to the new audio source. Via the WebConfig you also have the option to configure this audio source according to your wishes.
The AudioBox P150 Pro is an amplifier, streamer, Bluetooth receiver, DAB+/FM radio and central unit in one. Independent for 1 to 3 rooms or in combination with other trivum SoundSystems for up to 64 rooms.
In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.
8 independently configurable channels
Manual control for each relay on the device using slide switches
Does not require an external power supply
Electric current control can be configured
Following functions can be defined separately for each channel:
Download DATASHEET
Download MANUALE
Download DATABASE ETS
In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.
4 independently configurable channels
Manual control for each relay on the device using slide switches
Does not require an external power supply
Electric current control can be configured
Following functions can be defined separately for each channel:
Download DATASHEET
Download MANUALE
Download DATABASE ETS
| Pack Quantity | 100 pz. |
|---|---|
| Type | 221 |
| Article Part No. | 221-412 |
| Flexible section (max.) | 4 mm² |
| Category | Clamp |
| Connection | Spring |
| Color | Trasparent, Orange |
| Insulation material | Plastic |
| Rigid cross-section (min.) | 0.2 mm² |
| Length - Depth | 18.6 mm |
| Nom. Voltage | 450 V |
| Stripping length | 11 mm |
| Compatibile RoHS | Sì |
| Flexible section (min.) | 0.14 mm² |
| Pol2 | 2 |
| AWG | 24 - 12 |
| Width | 13.1 mm |
| Current | 32 A |
| Temperature range | fino a +105 °C |
| Rigid cross-section (max.) | 4 mm² |
It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply.
It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply.
With 4.3 "TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 4.3" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.
Including built-in box (cod 500016)
The Analog output 0-10V, 4 channels, is controlling 4 single 0-10V outputs.These are used, for example, to control analog 0-10V valves, in accordance with the requirements of room control units, mainly in cooling or heating applications in offices, hotel rooms, …
English
Italiano
