The 640mA power supply EIB produces and monitors the voltage for the KNX system.

The connection to the bus line takes place via a red/black terminal.

Also the bus line is decoupled from the p. supply with the integrated inductance.

Furthermore 640mA power supply EIB KNX is equipped with an auxiliary voltage of 30Vdc.

Also through the additional yellow/white connection terminal it powers the devices that need an additional voltage.

A status led indicates the correct functioning of the 640mA power supply EIB KNX.

4 modules DIN rail mounting.

The p.s. must be connected to the 230V p. line for correct operation.n.

The 2.6" KNX smart touch panel fan coil thermostat controller is a multifunctional control panel. It has an elegant appearance, high quality aluminum frame, only 9mm thick body. The smart touch panel is equipped with temperature sensor, humidity, laser detection. Touch controller has 10 programmable pages in addition to the thermostat and fan coil function. Scenarios, dimmer, on\off switching, curtains, shutters, thermostat, customizable climatic conditions. The icons and language of the smart touch panel thermostat are modifiable via tool Setting of the laser detection sensor up to 120cm with switching objects and dimmers The touch panel requires an additional 12-24V (<50mA) power supply Fan coil thermostat mounting is done via a 55mm wall box Frame included (options: Black, Siver, Bronze)

Smart Touch panel 4" KNX have resolution of 480*480. It was made with elegant appearance, high-grade aluminum frame, body only 9mm thick. The Smart Touch panel 4" KNX integrated multifunction including dimming, switch, scene, curtain, air condition. IT support text, icon, layout,text customization. Are built-in temperature and humidity sensor, support laser function and human body sensing. The smart touch panel 4" KNX  can get weather information through external weather station. 

Compact KNX actuator: 1 relay output 230V~/16A + 2 binary inputs galvanically isolated. KNX replacement for impulse switches. KNX Security. 1 DIN module. Art. 5327.

Compact KNX switching actuator with 2 bistable relay outputs 250V~/10A. Staircase function, heating actuator, integrated logic, KNX Security. 1 DIN module (18 mm). Art. 5444.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode. EnOcean Secure can be enabled via pressing a key combination. By configuration with the ETS® the push button switches to KNX RF mode with optional support of KNX Data Security. Via a factory reset the device can be switched back to EnOcean protocol.

The Blind Actuator KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked. The inputs Blind Actuator KNX IO 520 (1J2I) can be connected to conventional switches with an external voltage of 12 to 230 V. In the not configured state the binary inputs control the actuator channel. Via commissioning the device using ETS® software the binary inputs can be used independently. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output and input channels the Blind Actuator KNX IO 520 (1J2I) includes 16 independent functions for logic or timer control.

• ▪ 1 shutter output, 230 V∿, 8 A
• ▪ Drive directions electro-mechanically locked against each other
• ▪ For blinds, shutters or window drives
• ▪ Approach position via time calculation
• ▪ 2 inputs 12..230 V⎓∿, galvanically isolated
• ▪ Switching, dimming, shutters, scenes, pulse counter
• ▪ Integrated logic and timer functions
• ▪ Connections: KNX, plugable screw terminals for IO
• ▪ For DIN rail, width 1 unit (18 mm)

The Universal dimming actuator KNXIO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs. The dimming actuator supports phase control or phase section and is thus suitable for all dimmable 230 V lamps (eg incandescent lamps, dimmable LED lamps, halogen lamps). The dimming channel offers various comfort functions, including scenes, automatic, snooze function, staircase lighting and sequencer.The inputs of Universal dimming actuator KNXIO 530 (1D2I) can be controlled via conventional switches with an external voltage of 230 V. In addition to the output and input channels, the Universal dimming actuator KNXIO 530 (1D2I) contains 16 independent logic or timer functions. Two buttons and three LEDs on the front of the device allow local operation and visualization of the device status.

Bidirectional KNX gateway for Daikin Sky & VRV. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKV001.

Bidirectional KNX gateway for Daikin Split. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKS001.

Bidirectional KNX gateway for Gree VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXGRV001.

Bidirectional KNX gateway for LG VRV systems. 16 math logic units, 3 A/D inputs, OTA firmware, vertical vane control, Scene & Timer modules, BMS integration. Ref. HTKNXLGV001.

Bidirectional KNX gateway for Mitsubishi Electric CN105 (split/multi-split). 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV002.

Bidirectional KNX gateway for Mitsubishi Electric TB15. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV001.

Bidirectional KNX gateway for Mitsubishi Heavy Industries VRF. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMHV001.

Bidirectional KNX gateway for Toshiba VRF & Digital systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXTOV001.

The  Binary Input Universal Interfaces achieve the functional applications via conventional push buttons/switches, communicate by technical binary, which are used to control the devices such as the Dimmer Actuator/the Relay Actuator, to control domestic appliance indirectly. At the same time, they also enable the control of LEDs. The extremely compact design enables the device to be inserted in a conventional 60 mm wiring box or another type can be installed in the distribution boards on 35mm mounting rails according to EN60715. 

The Universal Interfaces have many functions that can be used in a wide variety of application areas. The following list provides an overview:

---Switching and dimming function.

---Control of blinds and shutters.

---Sending of values e.g. temperature values、water line.

---Invocate and storing of scenes.

---Trigger an LED for reporting an operation.

---Operation of various loads by multiple push button actions.

---Operation of several loads in a fixed switching sequence.

---Standard counting and differential counting.

Each channel of a device can adopt any of the functions described above.

Universal Input dimmer on-off up-down is used to connect the conventional buttons with the KNX system.The 4-channel KNX Universal Input dimmer on-off is equipped with outputs for 5Vdc status LEDs. While the 8-channel KNX Universal Input dimmer on-off up-down does not have the output for the LED lights. It is a multifunction device for controlling dimmers, on-off switching, movement of shutters and up-down shutters. In addition, the functions of impulse counter, scenario management, forcing values and sequences are provided. The extremely compact design allows you to place the device in a conventional 60mm box. The universal interface connects to the bus via the EIB connection terminals. Universal binary input interface uses no additional supply voltage. the physical address and parameter setting is done using the Engineering ETS design tools.

The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.

It is a flush mounted device,for ceiling fan applications in offices, hotel rooms..It is used for varying ceiling fan speed as determined by KNX input or control systems.Also,speed can be varied by push buttons directly connected to the MOTOR CONTROL device.The ceiling fan must be of standard motor type, without control electronics. If using multiple speed fans, always force fan in max speed.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

Bidirectional KNX gateway for Samsung NASA with individual control of up to 16 indoor units. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXSMS001.

Universal KNX infrared gateway with bidirectional synchronisation. 64 IR codes, 3 physical IR outputs, 8-step macros, dedicated AC module, 8 math logic units, KNX Data Secure. Ref. HTKNXIRC001.

Bidirectional KNX gateway for Midea Commercial & VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXMDVxx2.

• 27-channel 16A relay, configurable as a switch actuator, shutter control, or fan coil function.
• 4-channel 1-10V interface for dimming or analog control.
• 16-channel binary input, with 4 channels supporting NTC sensor input as an option.
• LCD display with manual control for easy operation.
• Built-in logic functions for advanced automation.
• USB Type-C port for firmware updates.

With the Analog Input Adpater you can connect music sources to certain trivum SoundSystems. The SoundSystem can be far away from the music source, because the adapter used a CAT5/6 cable to transfer the music signal to the SoundSystem.

A 3.5mm stereo jack socket is used for connection.

The SoundSystem must have a trivum AudioBus socket as input. The products RP311 and RP341 are prepared for this.

DIN rail power supply for the trivum REG music actuators.

Voltage: 24V
Power: 100 watts

The RP340 and RP341 require 2 power supplies. For RP010, RP310 and RP311 and RA410 one power supply each.

The SCW speaker has a significantly reduced installation depth of only 80 mm.The SCW165-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The SCW165-S has a high, short-term peak power capacity of 2x 90 watt.With its efficiency factor of 92 dB/W the SCW165-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The SCW165-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

The CW130-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The CW130-S has a high, short-term peak power capacity of 2x 75 watt.With its efficiency factor of 90 dB/W the CW130-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The CW130-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

With 7" TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 7" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.

Including built-in box (cod 500016)

The RA410 is a flexible universal amplifier for the DIN rail.

• Amplifier output with 2x40 Watt.
• Very flexible due to volume control and control input.
• Can be used as universal amplifier for any application or as extension for trivum SoundSystems

The RP010 is streamer and central unit in one. As the smallest model of our REG line it is a complete system. Connect an external amplifier or active speakers, use the trivum SmartPhone App and listen to AirPlay, Spotify, TuneIn and more with the RP010. The small RP010 contains a complete SoundSystem and more.

• Enormously flexible thanks to trivum t3OS operating system
• Preamplifier output with volume control for external power amplifiers
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, NAS, Qobuz and Web URLs.
• Free app for iOS and Android or to use with your browser.
• he RP010 can be used alone for 1 room. It can be combined with other trivum SoundSystems for up to 64 Zone.

The RP341 is a 4-way amplifier with one streamer, one FM tuner and one line input. Independent for 1-5 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 8x30 Watt
• additional variable preamplifier output 
• All 5 outputs share 3 sources: Streaming, Tuner and AUX
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP341 can be used alone for 1-5 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP340 is a 4-way amplifier, streamer and central unit in one. Independent for 4 rooms or in combination with other trivum sound systems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• Very inexpensive Multiroom System for 1 to 4 rooms
• Amplifier output with 8x30 Watt
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP340 can be used alone for 4 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP310 is an amplifier, streamer and central unit in one. As a complete sound system for one room, it finds its place in the control cabinet. Connect loudspeakers, network and power and immediately the modern SoundSystem is ready to play music via Smartphone App. 

• Enormously flexible via trivum t3OS operating system
• Amplifier output with 2x30 Watt.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to operate via browser
• The RP310 can be used alone for 1 zone. It can be combined with other trivum sound systems for up to 64 zones.

The RP311 is an amplifier, streamer, radio and central unit in one. Independent for 1 to 2 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• SoundSystem with many sources and connection options  
• Amplifier output with 2x30 Watt 
• additional variable preamplifier output 
• Both outputs share 3 sources: Streaming, Tuner and AUX
• It is also possible to use output 2 for subwoofers.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP311 can be used alone for 1-2 zones. It can be combined with other trivum sound systems for up to 64 zones.

Thanks to our intuitive app, the system is very easy to use - on smartphones as well as in a web browser or on the trivum TouchPads. Thanks to the trivum t3OS operating system, the trivum SoundSystems are both simple and very flexible. It contains many additional functions that make the RP311 a powerful central unit in any home. 

The trivum InStreamer adds another audio source to your trivum multiroom system. An external audio source, like a CD- or record player, can be connected via analog RCA or digital TOSLINK cable to the InStreamer. On the other hand, the InStreamer is connected via Cat-5 Ethernet cable to your LAN and will be automatically detected and integrated into your trivum system.The InStreamer is automatically detected, as soon as it is connected to the network. All master devices will then have access to the new audio source. Via the WebConfig you also have the option to configure this audio source according to your wishes.

The AudioBox P150 Pro is an amplifier, streamer, Bluetooth receiver, DAB+/FM radio and central unit in one. Independent for 1 to 3 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 2x150 Watt
• additional 2 preamplifier outputs (for further rooms or e.g. subwoofer)
• Streaming Client with HD Audio - 192kHz with 32Bit
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• All 3 outputs can access 7 sources: 3xStreaming, DAB+/FM Radio, Bluetooth, Digital Input, Analog Input
• 7 freely configurable keys can switch sources, play favourites or trigger macros or KNX
• The AudioBox P150 Pro can be used alone for 1-3 zones. It can be combined with other trivum SoundSystems for up to 64 zones.
• With 200mm x 60mm x 240mm (WxHxD) the AudioBox P150 Pro is very compact and finds its place everywhere.

In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

With 4.3 "TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 4.3" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.

Including built-in box (cod 500016)

The Analog output 0-10V, 4 channels, is controlling 4 single 0-10V outputs.These are used, for example, to control analog 0-10V valves, in accordance with the requirements of room control units, mainly in cooling or heating applications in offices, hotel rooms, …