The LED Dimming Actuator KNX IO 536 CC (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LLED Dimming Actuator KNX IO 536 CC (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 536 CC (4D) includes 16 independent functions for logic or timer control.

The KNX RF BLUE IO 553 CC SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator KNX RF BLUE IO 553 CC SECURE can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The KNX RF BLUE IO 553 CC SECURE supports KNX Data Security.

The KNX RF BLUE IO 552 CV SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the KNX RF BLUE IO 552 CV SECURE includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

The LED Dimming Actuator KNX IO 534 CV (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LED Dimming Actuator KNX IO 534 CV (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control.

The LED Dimming Actuator KNX IO 532 (1D1O) is a compact combined dimming/switching actuator with 1 PWM dimming output for LEDs and 1 bi-stable relay output. The dimming actuator can be used e.g. for LED panels or stripes. Besides controlling the dimmer by switching, rel. dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function or staircase light.The LED Dimming Actuator KNX IO 532 (1D1O) provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives). Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 532 (1D1O) includes 16 independent functions for logic or timer control. 

The USB INTERFACE KNX STICK 332 is a data interface between a PC or laptop and the KNX installation bus. USB INTERFACE KNX STICK 332can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames. Long telegrams enable a faster download to devices that can receive these telegrams.

The LEDs in the device indicate the operating status and communication errors on the bus. The USB connector is galvanic isolated from the KNX bus.

This USB INTERFACE KNX STICK 332 can be used to program KNX Secure devices with the ETS.

 RF USB INTERFACE KNX STICK 340 interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI. This RF USB INTERFACE KNX STICK 340 can be used to program KNX Secure devices with the ETS. The  RF USB INTERFACE KNX STICK 340 is compatible with ETS 5 (or higher). For software integration (Windows or Linux) of this interface the free SDK kDrive express is available. The power is supplied via the USB port.In addition to the telegram interface via cEMI, the KNX RF USB Interface Stick 340 includes a complete KNX Stack with communication objects and BAOS protocol V2. Thus, the stick offers the possibility to extend devices with USB connection to full KNX devices, which can even be programmed by ETS.

Compact KNX actuator: 1 relay output 230V~/16A + 2 binary inputs galvanically isolated. KNX replacement for impulse switches. KNX Security. 1 DIN module. Art. 5327.

Compact KNX switching actuator with 2 bistable relay outputs 250V~/10A. Staircase function, heating actuator, integrated logic, KNX Security. 1 DIN module (18 mm). Art. 5444.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

The KNX IP BAOS 777 is a powerful universal device for KNX installation: Thanks to the integrated web server, the device enables the visualization and control of buildings, rooms and functions in a standard web browser on a PC or mobile devices such as smartphones and tablets. The new, integrated e-mail function allows individual notification of several recipients, e.g. in case of status changes or an alarm. The integration of a Date & Time Server (NTP) makes it possible to obtain the date and time automatically via the Internet and to synchronize one’s own KNX installation. Extensive time functions allow the realisation of a powerful KNX time switch with weekly function.The configuration is done exclusively with the ETS software – no extra software or tool is required. The device also offers the function of a KNX IP interface (KNXnet/IP), for example as a programming interface for the ETS. Developers can access all functions via an API with BAOS RESTful Web Services. This allows the device to be used as an application-specific gateway, connecting the KNX bus to the existing IP infrastructure. The KNX IP BAOS 777 represents a powerful residential gateway for building control with smallest size and minimal power consumption.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode. EnOcean Secure can be enabled via pressing a key combination. By configuration with the ETS® the push button switches to KNX RF mode with optional support of KNX Data Security. Via a factory reset the device can be switched back to EnOcean protocol.

The KNX IP LineMaster 762.1 secure combines the essential functions of a KNX bus line: KNX power supply with choke, KNX IP router and KNX IP interface. In addition to the bus voltage the power supply offers an auxiliary voltage.

The KNX IP router in the KNX IP LineMaster 762.1 secure allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. Using the embedded KNX IP interface, the KNX line can be connected directly to a PC (e.g. by ETS). The device supports KNX Security which can be enabled in ETS. As secure router the device allows coupling of not secured communication on KNX TP to a secured IP backbone. Also for the interface functionality (unneling) KNX security prevents from unauthorized access. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNXnet/IP specification using the core, the device management, the tunneling and the routing part. The KNX IP LineMaster 762.1 secure has an extended filter table for main groupls 0 to 31 and is able to buffer up to 150 telegrams.

USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.

640mA BUS Power Supply DGS 366 (AUX 30V) is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA BUS Power Supply DGS 366 (AUX 30V) device has a bus choke and also provides an output for the auxiliary power supply. The integrated KNX node on the 640mA power supply monitors the output current, the bus voltage and the temperature in the switchboard. 640mA BUS Power Supply DGS 366 (AUX 30V) has several logic functions which are available for application purposes. The configuration of BUS DGS is done with the ETS (version 4.2 or later). An easy-to-read front panel OLED display on the DGS BUS allows the user to view operating parameters locally on the device.

The Blind Actuator KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked. The inputs Blind Actuator KNX IO 520 (1J2I) can be connected to conventional switches with an external voltage of 12 to 230 V. In the not configured state the binary inputs control the actuator channel. Via commissioning the device using ETS® software the binary inputs can be used independently. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output and input channels the Blind Actuator KNX IO 520 (1J2I) includes 16 independent functions for logic or timer control.

• ▪ 1 shutter output, 230 V∿, 8 A
• ▪ Drive directions electro-mechanically locked against each other
• ▪ For blinds, shutters or window drives
• ▪ Approach position via time calculation
• ▪ 2 inputs 12..230 V⎓∿, galvanically isolated
• ▪ Switching, dimming, shutters, scenes, pulse counter
• ▪ Integrated logic and timer functions
• ▪ Connections: KNX, plugable screw terminals for IO
• ▪ For DIN rail, width 1 unit (18 mm)

640mA Bus Power Supply 365 (AUX 30V) Modular 640mA line power supply with integrated isolation coil. The 640mA Bus Power Supply 365 (AUX 30V) can be installed in distribution boards on DIN rails with EIB / KNX bus connection terminal. Power Supply 365 is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA Bus Power Supply 365 (AUX 30V) has a built-in bus choke and also provides an output for the 30V auxiliary power supply. Three multicolored LEDs on the front indicate the conditions of the Power Supply 365 device. They signal overload with warning, temperature exceeding, telegram traffic and reset status. On 640mA The two buttons allow you to reset the KNX line.

The Universal dimming actuator KNXIO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs. The dimming actuator supports phase control or phase section and is thus suitable for all dimmable 230 V lamps (eg incandescent lamps, dimmable LED lamps, halogen lamps). The dimming channel offers various comfort functions, including scenes, automatic, snooze function, staircase lighting and sequencer.The inputs of Universal dimming actuator KNXIO 530 (1D2I) can be controlled via conventional switches with an external voltage of 230 V. In addition to the output and input channels, the Universal dimming actuator KNXIO 530 (1D2I) contains 16 independent logic or timer functions. Two buttons and three LEDs on the front of the device allow local operation and visualization of the device status.

KNX / Modbus RTU RS-485 gateway with 250 data points, master (25 slaves) / slave, KNX Security, ETS configuration, bus-powered. 1 DIN module. Art. 5498.

KNX / Modbus TCP gateway with 250 data points, master/slave mode, KNX Security, 8 KNXnet/IP tunnels, ETS configuration. Bus-powered. Art. 5425.

Bidirectional KNX / DMX512 gateway up to 64 channels, master and slave mode, RGB/RGBW, 4 sequencers, ETS configuration. 1 DIN module. Art. 5358.

KNX/IP object server with 1000 data points, BAOS Binary V2 Secure, KNX Security, 8 tunnels, 10 BAOS connections, bus-powered. 1 DIN module. Art. 5475.

KNXnet/IP router with KNX Security, 8 tunnels, Long Frames, filter 0..31, 150-telegram buffer. Recommended for new installations. 1 DIN module. Art. 5249.

KNXnet/IP router with routing and tunneling (5 tunnels), filter table 0..31, 150-telegram buffer, bus-powered. Available while stock lasts. Art. 5243.

KNXnet/IP WiFi interface with KNX Security, 6 tunnels, WPA2, integrated access point. ETS programming without LAN cable. Bus-powered. Art. 5537.

KNXnet/IP interface with KNX Security, 8 tunnels, Long Frames, bus-powered. Recommended for new installations. 1 DIN module (18 mm). Art. 5248.

KNXnet/IP programming interface via LAN (5 tunnels). Bus-powered, 1 DIN module (18 mm). Available while stock lasts. Art. 5242.

KNX 0/1..10V / 50 mA dimmer for ECG ballasts + bistable relay 250V~/10A. Compatible with 0..10V valves, scenes, KNX Security. 1 DIN module. Art. 5337.

KNX LED dimmer with PWM output 12..24V/6A + bistable relay 250V~/10A. Scenes, staircase, KNX Security, direct ETS control. Art. 5503.

KNX universal dimmer 230V~/200W (phase/phase-cut) + 2 inputs, LED retrofit and halogen compatible, scenes, KNX Security. 1 DIN module. Art. 5516.

KNX shutter actuator 1 channel 230V~/8A + 2 isolated inputs. Position via time calculation, direct ETS control, KNX Security. 1 DIN module. Art. 5515.

KNX binary input 4 channels for potential dry contacts with KNX Security, integrated logic and timer. 1 DIN module (18 mm). Art. 5514.

KNX binary input 4 channels 12..230 V (DC/AC) with galvanic isolation and KNX Security. Switching, dimming, shutters, scenes. 1 DIN module (18 mm). Art. 5513.

DIN rail KNX USB interface (1 module, 18 mm) for ETS programming. BAOS Protocol V2 Secure, KNX Long Frames, USB Type C. Art. 5501.

Compact KNX TP/TP line coupler (1 DIN module, 18 mm) with KNX Security, Security Proxy, galvanic isolation and extended filter table main group 0..31. Art. 5451.

KNX shutter actuator 6-channel 230V~/16A with electro-mechanical interlock, KNX Security and direct ETS control. KNX Block IO platform, DIN 6 modules (108 mm). Art. 5496.

KNX switching actuator with 12 outputs 230V~/16A on DIN rail (72 mm). Central power supply, KNX Security, mains failure detection. Weinzierl KNX Block IO platform.

Bi-directional communication gateway between KNX protocol and Fermax Smile Dominium video intercom.Allows to control and manage KNX devices from the Smile Dominium video intercom, using a project uploaded from the SiDEKNX software.Direct connection to the Fermax Smile Dominium video entry system and the KNX bus.  

With the Analog Input Adpater you can connect music sources to certain trivum SoundSystems. The SoundSystem can be far away from the music source, because the adapter used a CAT5/6 cable to transfer the music signal to the SoundSystem.

A 3.5mm stereo jack socket is used for connection.

The SoundSystem must have a trivum AudioBus socket as input. The products RP311 and RP341 are prepared for this.

DIN rail power supply for the trivum REG music actuators.

Voltage: 24V
Power: 100 watts

The RP340 and RP341 require 2 power supplies. For RP010, RP310 and RP311 and RA410 one power supply each.

The SCW speaker has a significantly reduced installation depth of only 80 mm.The SCW165-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The SCW165-S has a high, short-term peak power capacity of 2x 90 watt.With its efficiency factor of 92 dB/W the SCW165-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The SCW165-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

The CW130-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The CW130-S has a high, short-term peak power capacity of 2x 75 watt.With its efficiency factor of 90 dB/W the CW130-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The CW130-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

With 7" TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 7" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.

Including built-in box (cod 500016)

The RA410 is a flexible universal amplifier for the DIN rail.

• Amplifier output with 2x40 Watt.
• Very flexible due to volume control and control input.
• Can be used as universal amplifier for any application or as extension for trivum SoundSystems

The RP010 is streamer and central unit in one. As the smallest model of our REG line it is a complete system. Connect an external amplifier or active speakers, use the trivum SmartPhone App and listen to AirPlay, Spotify, TuneIn and more with the RP010. The small RP010 contains a complete SoundSystem and more.

• Enormously flexible thanks to trivum t3OS operating system
• Preamplifier output with volume control for external power amplifiers
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, NAS, Qobuz and Web URLs.
• Free app for iOS and Android or to use with your browser.
• he RP010 can be used alone for 1 room. It can be combined with other trivum SoundSystems for up to 64 Zone.

The RP341 is a 4-way amplifier with one streamer, one FM tuner and one line input. Independent for 1-5 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 8x30 Watt
• additional variable preamplifier output 
• All 5 outputs share 3 sources: Streaming, Tuner and AUX
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP341 can be used alone for 1-5 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP340 is a 4-way amplifier, streamer and central unit in one. Independent for 4 rooms or in combination with other trivum sound systems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• Very inexpensive Multiroom System for 1 to 4 rooms
• Amplifier output with 8x30 Watt
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP340 can be used alone for 4 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP310 is an amplifier, streamer and central unit in one. As a complete sound system for one room, it finds its place in the control cabinet. Connect loudspeakers, network and power and immediately the modern SoundSystem is ready to play music via Smartphone App. 

• Enormously flexible via trivum t3OS operating system
• Amplifier output with 2x30 Watt.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to operate via browser
• The RP310 can be used alone for 1 zone. It can be combined with other trivum sound systems for up to 64 zones.

The RP311 is an amplifier, streamer, radio and central unit in one. Independent for 1 to 2 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• SoundSystem with many sources and connection options  
• Amplifier output with 2x30 Watt 
• additional variable preamplifier output 
• Both outputs share 3 sources: Streaming, Tuner and AUX
• It is also possible to use output 2 for subwoofers.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP311 can be used alone for 1-2 zones. It can be combined with other trivum sound systems for up to 64 zones.

Thanks to our intuitive app, the system is very easy to use - on smartphones as well as in a web browser or on the trivum TouchPads. Thanks to the trivum t3OS operating system, the trivum SoundSystems are both simple and very flexible. It contains many additional functions that make the RP311 a powerful central unit in any home. 

The trivum InStreamer adds another audio source to your trivum multiroom system. An external audio source, like a CD- or record player, can be connected via analog RCA or digital TOSLINK cable to the InStreamer. On the other hand, the InStreamer is connected via Cat-5 Ethernet cable to your LAN and will be automatically detected and integrated into your trivum system.The InStreamer is automatically detected, as soon as it is connected to the network. All master devices will then have access to the new audio source. Via the WebConfig you also have the option to configure this audio source according to your wishes.

The AudioBox P150 Pro is an amplifier, streamer, Bluetooth receiver, DAB+/FM radio and central unit in one. Independent for 1 to 3 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 2x150 Watt
• additional 2 preamplifier outputs (for further rooms or e.g. subwoofer)
• Streaming Client with HD Audio - 192kHz with 32Bit
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• All 3 outputs can access 7 sources: 3xStreaming, DAB+/FM Radio, Bluetooth, Digital Input, Analog Input
• 7 freely configurable keys can switch sources, play favourites or trigger macros or KNX
• The AudioBox P150 Pro can be used alone for 1-3 zones. It can be combined with other trivum SoundSystems for up to 64 zones.
• With 200mm x 60mm x 240mm (WxHxD) the AudioBox P150 Pro is very compact and finds its place everywhere.

R27A is a fashionable, SIP-enabled IP video door phone with a RF card reader and a numeric keypad. It enables easy monitoring of an entrance area and convenient entry control. The ability of granting or denying access based on talking to and seeing your visitors as if in person, gives one a true sense of security and great peace of mind. 

• Premium audio and video quality
• Real-time entrance monitoring
• Remote door opening 
• RF card reader and numeric keypad
• SIP/ONVIF/Wiegand/PoE/IP65
• Anti-cold version available

Physical Features

• Body material: aluminum panel
• Camera: 3M pixels, with automatic lighting
• Button: 1 call button
• RF card reader: 13.56MHz
• PoE IEEE802.3af
• Power consumption: 12V DC input, <12W
• G-sensor for tamper alarm
• Enclosure rating: IP65
• Installation: flush mounting or wall-mounting
• Dimensions: 190x110x35mm

Download Datasheet

R27A is a fashionable, SIP-enabled IP video door phone with a RF card reader and a numeric keypad. It enables easy monitoring of an entrance area and convenient entry control. The ability of granting or denying access based on talking to and seeing your visitors as if in person, gives one a true sense of security and great peace of mind. 

• Premium audio and video quality
• Real-time entrance monitoring
• Remote door opening 
• RF card reader and numeric keypad
• SIP/ONVIF/Wiegand/PoE/IP65
• Anti-cold version available

Physical Features

• Body material: aluminum panel
• Camera: 3M pixels, with automatic lighting
• Button: manager center, dial key and clear key
• Keypad: numeric keypad
• RF card reader: 13.56MHz and 125 kHz
• PoE IEEE802.3af
• Power consumption: 12V DC input, <12W
• G-sensor for tamper alarm
• Support infrared sensor
• Enclosure rating: IP65 
• Operating Temperature: -4° to 131°F / -20° to 55°C (Anti-cold version available: -40 ~ 131 °F / -40 ~ 55°C)
• Installation: flush mounting or wall-mounting
• Dimensions: 280x130x68mm

Download Datasheet

R29S is the industry’s most cutting-edge SIP-enabled IP video door phone featuring Android OS and a large capacitive touch screen. It enables easy monitoring of an entrance area and convenient entry control.

• ● 7-inch large touch screen
• ● Premium audio and video quality
• ● Real-time entrance monitoring
• ● Remote door opening
• ● Multiple access methods
• ● Android 5.1/SIP/ONVIF/Wiegand/PoE/IP65

Entry Features

• RF card reader: 13.56MHz & 125kHz
• Digital keypad: Pass Number
• Facial recognition: 32 points of recognition
• Other biometric method: gesture.

Download DATASHEET

• Aluminum housing 
• Display: 4.3inch TFT with advanced GUI 
• Working voltage: DC 24V (support POE ) 
• Card Supported: IC/ID card 
• Support intercommunication function 
• Support tamper alarm
• IPX4 waterproof    

Doory is an intelligent numeric keypad that allows the remote entry of the access code to facilitate reception operations when you can not be present at the arrival of the customers. The code can be programmed using a dedicated APP to be installed on a Smartphone (iOS or Android). The access key can be renewed and updated whenever it is necessary to receive new guests.  

With 4.3 "TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 4.3" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.

Including built-in box (cod 500016)

IT82 is a SIP-enabled IP indoor  monitor for multifunctional communications from inside your home. It enables high-quality audio and video communications with its door phone and between indoor units in different rooms. All in-home automation devices can be easily managed and controlled by it. It is even capable of importing mobile applications for home entertainments. At the core of all these is its large capacitive touch screen and the intuitive Android Operating System.

Physical Features

• Display: active matrix TFT, transmissive type
• Screen: 7” capacitive touch screen
• Button: 5 capacitive, programmable pushbuttons
• Memory: RAM-2GB, Flash-4GB
• PoE IEEE802.3af
• Power consumption: 12V DC input, <12W
• Aspect ratio: 16:9
• Resolution: 1024x600
• Brightness: 300nits (cd/m²)
• Contrast: 800:1
• Color depth: 24-bit, 16M colors
• Illumination: edge-lit LED
• Viewing angle: ±80°left, ±80°right;±60°upper, ±70°lower
• Optional 1M-pixel camera
• Optional Wi-Fi and Bluetooth
• Installation: US or European electrical wall box mounting
• Dimensions: 232 x 160 x 21 mm

Akuvox smart indoor monitor IT83R is a multifunctional modern in-home intercom featuring Android OS 6.0 and 10-inch capacitive touch screen. It provides exceptional audio and video communication with door phone and room-to-room communication via SIP 2.0 protocol, and supports real-time entrance monitoring via ONVIF/RTSP. It comes with rich interface that enables easy integration with other digital systems, such as home automation and telehealthcare.

• 10-inch touch screen
• Intuitive Android Operating System 
• Alexa Integration
• Premium audio and video quality
• Home automation integration
• Android 6.0/SIP/RTSP/PoE

Touch Screen Display

• Display Mode: Normally black, Transmissive
• LCD Size: 10 inch (Diagonal)
• Aspect Ratio: 16:9
• Resolution: 1280x800
• Contrast ratio: 800:1
• Luminance: 350 cd/m ²
• Viewing Angle: ±89° Left, ±89° Right,
• Viewing Angle: ±89° Upper, ±89° Lower
• Touch Screen: Projected Capacitive

Mechanical Parameter

• Dimensions (W x H x D): 251 x 182.5 x 22 mm

• Aluminum housing 
• Display: 4.3inch TFT with advanced GUI 
• Working voltage: DC 24V (support POE ) 
• Card Supported: IC/ID card 
• Support intercommunication function 
• Name list Management 
• Wi-Fi Conection 
• Support tamper alarm
• IPX5 waterproof   

• Aluminum housing 
• Display: 4.3inch TFT with advanced GUI 
• Working voltage: DC 24V (support POE ) 
• Card Supported: IC/ID card 
• Support intercommunication function 
• Name list Management 
• Wi-Fi Conection 
• Support tamper alarm
• IPX5 waterproof  

• Working voltage: DC 24V (support POE)
• Protocol: Standard TCP/IP
• 7inch capacitive touch with advanced GUI
• Automatic photo recording of visitors
• Support Intercommunication function
• Support alarm settings with 8 defense zones
• Connected up to 255 CCTV cameras
• Support emergency SOS calling to guard stations
• Able to receive text and photo information 
• Support KNX home automation connection 

• Working voltage: DC 24V (support POE)
• Protocol: Standard TCP/IP
• 7inch capacitive touch with advanced GUI
• Automatic photo recording of visitors
• Support Intercommunication function
• Support alarm settings with 8 defense zones
• Connected up to 255 CCTV cameras
• Support emergency SOS calling to guard stations
• Able to receive text and photo information 
• Support KNX home automation connection

• Working voltage: DC 24V (support POE)
• Protocol: Standard TCP/IP
• 7inch capacitive touch with advanced GUI
• Automatic photo recording of visitors
• Support Intercommunication function
• Support alarm settings with 8 defense zones
• Connected up to 255 CCTV cameras
• Support emergency SOS calling to guard stations
• Able to receive text and photo information
• Support KNX home automation connection