KNX

KNX building automation is the automation of functions relating to electrical and technological systems. The KNX building automation system guarantees the best performance of the system in terms of safety, comfort and energy efficiency. Moreover building automation reduces operating times by modulating the power actually absorbed by adopting control strategies. Through KNX allows for scheduling, occupancy, gain, zoning. Furthermore, integrating, remoting, metering allow to reach a high degree of energy efficiency. Futhermore the bilding automation system is used in residential, tertiary, commercial, artisanal and public utility applications.

Active filters

  • Categories: Input & Output Devices
  • Categories: System Devices
WEINZIERL KNX ENOCEAN 636 SECURE GATEWAY

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

€428.40
WEINZIERL IP LINEMASTER 762.1 KNX SECURE

The KNX IP LineMaster 762.1 secure combines the essential functions of a KNX bus line: KNX power supply with choke, KNX IP router and KNX IP interface. In addition to the bus voltage the power supply offers an auxiliary voltage.

The KNX IP router in the KNX IP LineMaster 762.1 secure allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. Using the embedded KNX IP interface, the KNX line can be connected directly to a PC (e.g. by ETS). The device supports KNX Security which can be enabled in ETS. As secure router the device allows coupling of not secured communication on KNX TP to a secured IP backbone. Also for the interface functionality (unneling) KNX security prevents from unauthorized access. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNXnet/IP specification using the core, the device management, the tunneling and the routing part. The KNX IP LineMaster 762.1 secure has an extended filter table for main groupls 0 to 31 and is able to buffer up to 150 telegrams.

€551.70
DATEC Datec Electronic AG EIB/KNX Switch...
The SWITCH ACTUATOR 4x is a flush mounted KNX device,forlighting and shading applications in offices, hotel rooms and much more.This device is used for switching lights or controlling blinds or shutters as determined by KNX input or control systems. Also, lights and blinds/shutters can be controlled by push buttons directly connected to the SWITCH ACTUATOR 4x device.
€85.50 Regular price €121.00
Interra Line Coupler

Basic functionality of the TP line coupler ITR901-002 is coupling two KNX TP lines (main line and subline) providing galvanic isolation in between. Due to its flexibility ITR901-002 coupler unit can be used as KNX line coupler or KNX area coupler (to connect a TP line to a TP area or backbone) or KNX repeater (without filtering). Operational and filtering states, malfunction and faulty communication are indicated by LEDs. 

Download  DATASHEET

Download DATABASE ETS

€170.00
EAE EAE KNX Room Controller Unit 20Outputs +...

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

  • Switching lighting
  • Switching loads
  • Controlling AC/DC blinds
  • Controlling fan coils (2 & 3 point valve)
  • Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

  • Staircase
  • External logic
  • Internal logic 
  • Priority
  • Threshold
  • Operating hour
  • Sweep

Input channel operates as universal interface with following functions :

  • Switch / push button input 
  • Dimmer control 
  • Control of shutter/blinds 
  • Value sending 
  • Scene control 
  • Counter for count pulse

Download DATASHEET

Download DATABASE ETS

€512.50