Attuatore di Commutazione KNX DATEC 1630.03160/61100 – 4 Canali 10A da Incasso con Ingressi Binari.

English description pending.

The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.

Attuatore KNX Motor Control DATEC 1630.03141/65100 – Comando Ventilatore a Soffitto da Incasso 230VAC 100W.

English description pending.

KNX IP Interface 732 secure - Interfaccia IP/KNX Compatta Bus Powered con KNX Security.

English description pending.

KNXnet/IP interface with KNX Security, 8 tunnels, Long Frames, bus-powered. Recommended for new installations. 1 DIN module (18 mm). Art. 5248.

EAE Room Control Unit RCU2018 – 20 Uscite 16A, 18 Ingressi KNX.

English description pending.

EAE Room Control Unit RCU2018 – 20 Uscite 16A, 18 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

• Wireless wall-mounted Infrared PIR motion detector for lighting control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• As soon as it detects movement, the sensor sends the ON signal to the linked receiver and its
  contact keeps closed. The ON time must be set on the receiver.
• Wall or ceiling mounting installation.
• Coverage: 180º and Ø10m at 2m high.
• Power Supply: 2 x 3V AA Lithium batteries L91. Working life over 15 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: IT KNX 001, MI KNX 001 & CO KNX 002.

• Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• It has 2 operation modes:
  · Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 & CO KNX 002.
  · Presence detector: useful for heating and air conditioning control.
• Compatible with the actuators: TM KNX 001 & CO KNX 002.
• Incorporates Temperature sensor
• Coverage: 360º and Ø7m at 2,5m high.
• Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
• Radio-frequency: 868,4MHz.

• Wireless Luminosity sensor transmitter for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brigthness value to the lighting actuator for constant light control operation.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. 

Infrared presence detector Presence Control PRO IR Quattro HD KNX for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses,installation height up to 10 m,controll 4 lighting channels and HVAC,4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone. 

IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m  

IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m 

It is possible to adjust the presence sensor sensitivity in an easy way,selecting between 3 different levels or personalizing by yourself.It includes parameters to define regulation steps,to establish deviations, or to calibrate it.It is also possible to change between auto and manual mode, defining the behavior when it changes between those two options.It also includes an additional thermostat 

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

KNX IP BAOS 774 - Gateway IP/KNX Object Server 1000 Oggetti con Binary V2 e JSON.

English description pending.

English description pending.

Pulsante KNX Weinzierl TP Push Button 420.1 secure – con Termostato Ambiente Integrato, Serie MATCH 55.

English description pending.

English description pending.

Modulo I/O KNX IP Weinzierl Multi IO 580 – 48 Canali Input/Output su Rete IP, Senza Bus TP.

English description pending.

English description pending.

KNX IP BAOS 773 - Gateway IP/KNX con Object Server: Tunneling, Binary V2 e JSON Web Services.

English description pending.

English description pending.

KNX BAOS Module 838 kBerry - Modulo KNX Object Server per Raspberry Pi.

English description pending.

English description pending.

Modulo I/O KNX Weinzierl TP Multi IO 570.1 secure – 48 Canali Input/Output con KNX Data Security.

English description pending.

English description pending.

KNX RF/TP Coupler 673.1 secure - Accoppiatore Radio KNX con Security Proxy e Segment Coupler.

English description pending.

English description pending.

Pulsante 24V Weinzierl 436 – Tastierino Potenziale Libero per Centrali Smart Home e PLC, Serie MATCH 55.

English description pending.

English description pending.

KNX Modbus RTU Gateway 886.1 secure - Gateway KNX/Modbus RS-485 con Isolamento Galvanico.

English description pending.

KNX / Modbus RTU RS-485 gateway with 250 data points, master (25 slaves) / slave, KNX Security, ETS configuration, bus-powered. 1 DIN module. Art. 5498.

KNX Modbus TCP Gateway 716 secure - Gateway KNX/Modbus TCP con Interfaccia IP.

English description pending.

KNX / Modbus TCP gateway with 250 data points, master/slave mode, KNX Security, 8 KNXnet/IP tunnels, ETS configuration. Bus-powered. Art. 5425.

KNX DMX Gateway 544 - Gateway KNX/DMX512 per Controllo Illuminazione RGB/RGBW.

English description pending.

Bidirectional KNX / DMX512 gateway up to 64 channels, master and slave mode, RGB/RGBW, 4 sequencers, ETS configuration. 1 DIN module. Art. 5358.

KNX IP BAOS 774.1 secure - Gateway IP/KNX Object Server con KNX Security e BAOS Security.

English description pending.

KNX/IP object server with 1000 data points, BAOS Binary V2 Secure, KNX Security, 8 tunnels, 10 BAOS connections, bus-powered. 1 DIN module. Art. 5475.

KNX IP Router 752 secure - Router IP/KNX Compatto Bus Powered con KNX Security.

English description pending.

KNXnet/IP router with KNX Security, 8 tunnels, Long Frames, filter 0..31, 150-telegram buffer. Recommended for new installations. 1 DIN module. Art. 5249.

KNX IP Router 751 - Router IP/KNX Compatto Bus Powered con Tabella Filtri Estesa.

English description pending.

KNXnet/IP router with routing and tunneling (5 tunnels), filter table 0..31, 150-telegram buffer, bus-powered. Available while stock lasts. Art. 5243.

KNX IP Interface 740.2 wireless secure - Interfaccia WiFi KNX con KNX Security AES-128.

English description pending.

KNXnet/IP WiFi interface with KNX Security, 6 tunnels, WPA2, integrated access point. ETS programming without LAN cable. Bus-powered. Art. 5537.

KNX IP Interface 731 - Interfaccia Compatta LAN/Ethernet per KNX Bus Powered.

English description pending.

KNXnet/IP programming interface via LAN (5 tunnels). Bus-powered, 1 DIN module (18 mm). Available while stock lasts. Art. 5242.

KNX 0/1..10V / 50 mA dimmer for ECG ballasts + bistable relay 250V~/10A. Compatible with 0..10V valves, scenes, KNX Security. 1 DIN module. Art. 5337.

Attuatore Dimmer/Relè KNX Weinzierl IO 532.1 secure – 1 Uscita PWM LED + 1 Relè, KNX Data Security.

English description pending.

KNX LED dimmer with PWM output 12..24V/6A + bistable relay 250V~/10A. Scenes, staircase, KNX Security, direct ETS control. Art. 5503.

Attuatore Dimmer KNX Weinzierl IO 530.1 secure – 1 Canale Dimmer 230V + 2 Ingressi Binari, KNX Data Security.

English description pending.

KNX universal dimmer 230V~/200W (phase/phase-cut) + 2 inputs, LED retrofit and halogen compatible, scenes, KNX Security. 1 DIN module. Art. 5516.

Attuatore Tapparelle KNX Weinzierl IO 520.1 secure – 1 Uscita Serranda + 2 Ingressi Binari, Calcolo Posizione.

English description pending.

KNX shutter actuator 1 channel 230V~/8A + 2 isolated inputs. Position via time calculation, direct ETS control, KNX Security. 1 DIN module. Art. 5515.

KNX binary input 4 channels for potential dry contacts with KNX Security, integrated logic and timer. 1 DIN module (18 mm). Art. 5514.

Ingresso Binario KNX Weinzierl IO 410.1 secure – 4 Canali 12-230V, Switching/Dimming/Tapparella/Colore/Scena.

English description pending.

KNX binary input 4 channels 12..230 V (DC/AC) with galvanic isolation and KNX Security. Switching, dimming, shutters, scenes. 1 DIN module (18 mm). Art. 5513.

KNX USB Interface 312.1 - Interfaccia USB-C/KNX 1 Modulo con Long Frame APDU 233 e BAOS V2.

English description pending.

DIN rail KNX USB interface (1 module, 18 mm) for ETS programming. BAOS Protocol V2 Secure, KNX Long Frames, USB Type C. Art. 5501.

KNX LineCoupler 650.1 secure - Accoppiatore di Linea KNX con Security Proxy e Segment Coupler.

English description pending.

Compact KNX TP/TP line coupler (1 DIN module, 18 mm) with KNX Security, Security Proxy, galvanic isolation and extended filter table main group 0..31. Art. 5451.

Attuatore Tapparelle KNX Weinzierl IO 522 secure – 6 Canali Relè 230V/16A, Alimentazione Centralizzata.

English description pending.

KNX shutter actuator 6-channel 230V~/16A with electro-mechanical interlock, KNX Security and direct ETS control. KNX Block IO platform, DIN 6 modules (108 mm). Art. 5496.

Attuatore di Commutazione KNX Weinzierl IO 512 secure – 12 Uscite Relè 230V/16A, Alimentazione Centralizzata.

English description pending.

KNX switching actuator with 12 outputs 230V~/16A on DIN rail (72 mm). Central power supply, KNX Security, mains failure detection. Weinzierl KNX Block IO platform.

Attuatore Dimmer LED KNX Weinzierl IO 536 CC (4D) – 4 Uscite a Corrente Costante RGB/RGBW/Tunable White.

English description pending.

The LED Dimming Actuator KNX IO 536 CC (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LLED Dimming Actuator KNX IO 536 CC (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 536 CC (4D) includes 16 independent functions for logic or timer control.

Attuatore Dimmer LED KNX RF Weinzierl Blue IO 553 CC secure – 4 Uscite Wireless Corrente Costante RGB/RGBW/Tunable White.

English description pending.

The KNX RF BLUE IO 553 CC SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator KNX RF BLUE IO 553 CC SECURE can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The KNX RF BLUE IO 553 CC SECURE supports KNX Data Security.

Attuatore Dimmer LED KNX RF Weinzierl Blue IO 552 CV secure – 4 Uscite PWM Wireless RGB/RGBW/Tunable White.

English description pending.

The KNX RF BLUE IO 552 CV SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the KNX RF BLUE IO 552 CV SECURE includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

Attuatore Dimmer LED KNX Weinzierl TP Blue IO 550 CV secure – 4 Uscite PWM RGB/RGBW/Tunable White.

English description pending.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

EAE Attuatore Fan Coil FCA100 KNX – Controllo Ventilconvettori 2/4 Tubi, Valvola Triac/0-10V.

English description pending.

MD100 KNX movement detector is used in indoor spaces with integrated light sensor to achieve presence detection and constant light functions in a single device.

• Flush or surface mount options
• 9m in diameter movement detection at 2.5 m assembly height
• Integrated light level sensor and movement sensor to achieve constant light function
• Possibility to control air conditioning and ventilation through HVAC
• Adjustable brightness level and duration for “Movement”, “After Movement”, and “No Movement” functions
• Two constant light level adjustments for two states: Vacant & Occupied
• Ability to send movement status periodically with a separate communication object
• Feature to operate as a single sensor when connected with other KNX presence sensors
• Test and calibration modes for convenience during installation
• Does not require an external power supply

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE Attuatore KNX SA108 – 8 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Attuatore KNX SA104 – 4 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Room Control Unit RCU0808 – 8 Uscite 16A, 8 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1616 – 16 Uscite 16A, 16 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS