KNX
KNX building automation is the automation of functions relating to electrical and technological systems. The KNX building automation system guarantees the best performance of the system in terms of safety, comfort and energy efficiency. Moreover building automation reduces operating times by modulating the power actually absorbed by adopting control strategies. Through KNX allows for scheduling, occupancy, gain, zoning. Furthermore, integrating, remoting, metering allow to reach a high degree of energy efficiency. Futhermore the bilding automation system is used in residential, tertiary, commercial, artisanal and public utility applications.
Active filters
- Eight completely programmable independent touch areas.
- Includes a discretized PI regulator to achieve greater comfort and energy savings.
- Built-in humidity sensor.
- Dew point measurement according to relative humidity and temperature.
- Arithmetic Logic Unit
- Timers/counters.
- Also available in the White version
With the Analog Input Adpater you can connect music sources to certain trivum SoundSystems. The SoundSystem can be far away from the music source, because the adapter used a CAT5/6 cable to transfer the music signal to the SoundSystem.
A 3.5mm stereo jack socket is used for connection.
The SoundSystem must have a trivum AudioBus socket as input. The products RP311 and RP341 are prepared for this.
DIN rail power supply for the trivum REG music actuators.
Voltage: 24V
Power: 100 watts
The RP340 and RP341 require 2 power supplies. For RP010, RP310 and RP311 and RA410 one power supply each.
The SCW speaker has a significantly reduced installation depth of only 80 mm.The SCW165-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The SCW165-S has a high, short-term peak power capacity of 2x 90 watt.With its efficiency factor of 92 dB/W the SCW165-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The SCW165-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.
The CW130-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The CW130-S has a high, short-term peak power capacity of 2x 75 watt.With its efficiency factor of 90 dB/W the CW130-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The CW130-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.
With 7" TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 7" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.
Including built-in box (cod 500016)
The RA410 is a flexible universal amplifier for the DIN rail.
- Amplifier output with 2x40 Watt.
- Very flexible due to volume control and control input.
- Can be used as universal amplifier for any application or as extension for trivum SoundSystems
The RP010 is streamer and central unit in one. As the smallest model of our REG line it is a complete system. Connect an external amplifier or active speakers, use the trivum SmartPhone App and listen to AirPlay, Spotify, TuneIn and more with the RP010. The small RP010 contains a complete SoundSystem and more.
- Enormously flexible thanks to trivum t3OS operating system
- Preamplifier output with volume control for external power amplifiers
- Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, NAS, Qobuz and Web URLs.
- Free app for iOS and Android or to use with your browser.
- he RP010 can be used alone for 1 room. It can be combined with other trivum SoundSystems for up to 64 Zone.
The RP341 is a 4-way amplifier with one streamer, one FM tuner and one line input. Independent for 1-5 rooms or in combination with other trivum SoundSystems for up to 64 rooms.
- Enormously flexible thanks to trivum t3OS operating system
- Amplifier output with 8x30 Watt
- additional variable preamplifier output
- All 5 outputs share 3 sources: Streaming, Tuner and AUX
- Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
- Free app for iOS and Android or to use via browser
- The RP341 can be used alone for 1-5 zones. It can be combined with other trivum sound systems for up to 64 zones.