- -10%
DINUY RF KNX Temperature Sensor Probe Heating Floors
SE K5X 005
New product
- Wireless Temperature sensor transmitter with Probe for heating floors.
- It sends the temperature value in the place where the probe is installed.
- Specially-indicated for underfloor heating installations.
- Includes the following components:
· Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
receiver.
· Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
waterproof. - The temperature value is sent every minute.
- Incorporates RF signal repeater function, which can be enabled or disabled as needed.
- Power supply: 230V~ 50Hz.
- Dimensions: 45 x 42 x 12mm.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.
SE K5X 005
New product
You might also like
-
![DINUY One Channel interface 2-Fold Pushbutton]()
![]()
- -10%
-
![DINUY RF KNX 1 CHANNEL PORTABLE PUSHBUTTON]()
- -10%
-
![DINUY RF KNX Radio Remote Control 5 Channels 5 Scene]()
- -10%
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -10%
-
![DINUY RF KNX WIRELESS BRIGHTNESS SENSOR FOR SOLAR PROTECTION]()
- -10%
-
![DINUY RF KNX DOOR/ WINDOW SENSOR]()
- -10%
-
![DINUY RF KNX TEMPERATURE SENSOR SETTING KNOB]()
- -10%
-
![DINUY RF KNX Temperature Sensor Probe Heating Floors]()
- -10%
-
![DINUY RF KNX Sensor Constant Light Control]()
- -10%
-
![DINUY RF KNX LUMINOSITY SENSOR SETPOINT KNOB]()
- -10%
-
![DINUY RF KNX FLUSH-CEILING MOTION DETECTOR]()
- -10%
-
![DINUY RF KNX SURFACE MOTION DETECTOR]()
- -10%
-
![DINUY RF KNX 4-CHANNEL ANALOGUE/DIGITAL INTERFACE]()
- -10%
-
![DINUY RF KNX 4-CHANNEL UNIVERSAL INTERFACE]()
- -10%
-
![DINUY RF KNX 1-channel Switch actuator General Purpose]()
- -10%
-
![DINUY RF KNX 1-channel Switch actuator General Purpose]()
- -10%
-
![DINUY RF KNX 2-CHANNEL ON/OFF / 1-CHANNEL BLIND/SHUTTER ACTUATOR]()
- -10%
-
![DINUY RF KNX THERMOSTAT]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -10%
-
![DINUY RF KNX TEMPERATURE SENSOR]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY RF KNX UNIVERSAL DIMMER & LED LAMPS]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX ATTUATORE DIMMER STRISCE LED 4 CANALI / 1 CANALE RGB+W]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
-
![DINUY TP KNX RILEVATORE DI MOVIMENTO ON/OFF]()
- -10%
- Wireless Temperature sensor transmitter with Probe for heating floors.
- It sends the temperature value in the place where the probe is installed.
- Specially-indicated for underfloor heating installations.
- Includes the following components:
· Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
receiver.
· Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
waterproof. - The temperature value is sent every minute.
- Incorporates RF signal repeater function, which can be enabled or disabled as needed.
- Power supply: 230V~ 50Hz.
- Dimensions: 45 x 42 x 12mm.
- Radio-frequency: 868,4MHz.
- Range: up to 100m (in the free field).
- Compatible with: TM KNX 001 & CO KNX 002.