Left Banner

Blog Categories

Blog Categories

List of products by brand DINUY

Active filters

DINUY DINUY RF KNX 4-CHANNEL UNIVERSAL INTERFACE
  • Universal Interface with 4 binary inputs and 4 LED outputs.
  • The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for
    connection of conventional pushbuttons, free-voltage motion detectors, etc.
  • The interface can evaluate at its potential-free inputs up to 4 pushbutton/switch states with a
    common reference potential and send the corresponding telegrams.
  • The telegrams may be for switching or dimming, blind/shutter control, value transmitter applications
    (light level, temperature,…), light scene control or pulse counting.
  • As an alternative, the four channels can control four LEDs as independent outputs.
  • The outputs are protected against short circuits, overload and wrong polarity.
  • This device is flush mounted in a universal box, behind the pushbutton/switch.
  • Dimensions: 38 x 42 x 15mm.
  • Programming and commissioning by ETS4 or later.
€92.80
DINUY DINUY KNX RF/TP Coupler
Sold: 8
  • The KNX RF / TP coupler is a compact KNX Radio coupler. Connect the KNX RF devices of a radio line with the KNX Twisted Pair Bus.
  • You have a filter table (8k bytes).
  • Supports long frames compatible with ETS® ETS5 or higher software.
  • The keys on the front allow you to disable the telegram filter for testing purposes.
  • The LEDs indicate the operating conditions and communication errors on the KNX bus.
  • The power supply is supplied via the KNX bus (main line).
  • Programming and commissioning using ETS5 or later.
€355.00
DINUY DINUY RF KNX 1-channel Switch actuator...
Sold: 3
  • Wireless 1-channel Switch actuator for general purpose.
  • Up to 16A switching capacity with non-free voltage output.
    Two different operation modes:
    · Switch ON/OFF.
    · Timer: 3sec ~ 5min.
  • Incorporates RF signal repeater function, which can be enabled or disabled as needed.
  • A conventional pushbutton can be wired for local control.
  • DIN-rail mounting. Dimensions: 1 module wide.
  • 230V-operated.
  • Radio-frequency: 868,4MHz.
  • Range: up to 100m (in the free field).
  • Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.
€144.48
DINUY DINUY RF KNX TEMPERATURE SENSOR
  • Wireless Temperature value transmitter.
  • Sends the temperature value measured in the place when:
    · The temperature value changes more than ±0,5ºC.
    · 60 minutes after the last transmission.
    · Pressing the inside link key.
  • Dimensions: 78 x 28 x 23mm.
  • Portable or wall fix mounted.
  • Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
  • Radio-frequency: 868,4MHz.
  • Range: up to 100m (in the free field).
  • Compatible with: TM KNX 001 & CO KNX 002.
€204.87
DINUY DINUY RF KNX TEMPERATURE SENSOR
  • Wireless Temperature value transmitter.
  • Sends the temperature value measured in the place when:
    · The temperature value changes more than ±0,5ºC.
    · 60 minutes after the last transmission.
    · Pressing the inside link key.
  • Dimensions: 78 x 28 x 23mm.
  • Portable or wall fix mounted.
  • Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
  • Radio-frequency: 868,4MHz.
  • Range: up to 100m (in the free field).
  • Compatible with: TM KNX 001 & CO KNX 002.
€144.79