KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.

640mA BUS Power Supply DGS 366 (AUX 30V) is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA BUS Power Supply DGS 366 (AUX 30V) device has a bus choke and also provides an output for the auxiliary power supply. The integrated KNX node on the 640mA power supply monitors the output current, the bus voltage and the temperature in the switchboard. 640mA BUS Power Supply DGS 366 (AUX 30V) has several logic functions which are available for application purposes. The configuration of BUS DGS is done with the ETS (version 4.2 or later). An easy-to-read front panel OLED display on the DGS BUS allows the user to view operating parameters locally on the device.

Street Light Zhaga Led 100W DALI2 is a LED street floodlight for a reliable solution and for significant energy savings compared to conventional luminaires. Characterized by a luminous flux of 18000Lm, the Street Light Zhaga Led 100W DALI2 has a luminous efficiency of 180LM/W. Equipped of ENEC ENEC+ TUV CE CB IECEE SAA RoHS LM79 LM80 LM82 ISTMT TM21 IK08 IK10 certifications. The Street Light Zhaga Led 100W DALI2 has passed the photobiosafety test with 3G vibration, sand test, UV test, REACH L70B20 >100,000 hours. The Zhaga LED floodlight is suitable for street lighting, public area lighting, highway lighting, lighting applications of parking lots. Depending on the area, you can choose 100W led street light to replace 300W HPS, MH, HQI. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption.

Zhaga LoRaWAN controller included,

100W 5000K version

Nemo Flood Light Zhaga LED provides high-quality, high-efficiency LED lighting. The Nemo Flood Light Zhaga LED lamp is made of integrated aluminum material (ADC12) by die casting, light weight, excellent heat dissipation, high luminous efficiency. Due to its characteristics, Nemo Flood Light Zhaga LED is a projector with easy installation and low costs of transport. 100W, 150W, 200W options are available, very suitable for outdoor lighting applications. Optional professional beam angle 10, 30, 60, 90, 120, P45 (anti-glare), Type II (115x150 degrees), Type III (120X150 degrees). Nemo Flood Light Zhaga LED is suitable for exterior walls, billboards, green areas, shop signs. It finds its greatest use in sports fields, tunnels and parking areas. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption. High protection grade IP66 and IK08, 10KV overvoltage protection.

LoRaWAN Zhaga Controller included.

200w 5000K version

Conveyor Light Zhaga LED has been designed to provide the most energy efficient way to illuminate conveyor belts and industrial walkways. Thanks to the high efficiency of the entire lighting system, Conveyor Light Zhaga LED is able to provide the required minimum of 40 lux with an average of 80 lux. These values are obtained when the Zhaga LED Conveyor Lights are spaced 12 m apart with a typical installation height of 2.7m and 5 degree tilt. The robust design, great versatility and flexibility allow the Conveyor Light Zhaga LED adapts to many installations: cycle and pedestrian paths, walkways, camping areas, etc. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption. High protection grade IP66 and IK08, 10KV overvoltage protection.LoRaWAN Zhaga Controller included

• Universal Interface with 4 binary inputs and 4 LED outputs.
• The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for
  connection of conventional pushbuttons, free-voltage motion detectors, etc.
• The interface can evaluate at its potential-free inputs up to 4 pushbutton/switch states with a
  common reference potential and send the corresponding telegrams.
• The telegrams may be for switching or dimming, blind/shutter control, value transmitter applications
  (light level, temperature,…), light scene control or pulse counting.
• As an alternative, the four channels can control four LEDs as independent outputs.
• The outputs are protected against short circuits, overload and wrong polarity.
• This device is flush mounted in a universal box, behind the pushbutton/switch.
• Dimensions: 38 x 42 x 15mm.
• Programming and commissioning by ETS4 or later.

This 45W NFC DALI DT8 LED Driver is DALI-2 certified and in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and compatible with universal DALI masters that support DT8 commands. The driver  45W NFC DALI DT8 LED can be programmed with NFC programming APP or tool, the output current can be configured with 0.1mA stepping between 500-1400mA, which ensures high current accuracy and helps to reduce stocks. DALI configurations such as addressing, grouping, scene setting, power on level, system fail level, fade time, fade rate etc. can also be configured through NFC.With built-in DALI-2/Push interface, this  45W NFC DALI DT8 LED device is endowed with high power factor and efficiency. This dimmable driver has maximum output power of 45W. With class Ⅱ power supply and full isolated plastic case, this driver can switch and dim LED lighting fixtures. It features flicker free and deep dimming to 0.01%. Besides, it has error report function. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.