The 640mA power supply EIB produces and monitors the voltage for the KNX system.

The connection to the bus line takes place via a red/black terminal.

Also the bus line is decoupled from the p. supply with the integrated inductance.

Furthermore 640mA power supply EIB KNX is equipped with an auxiliary voltage of 30Vdc.

Also through the additional yellow/white connection terminal it powers the devices that need an additional voltage.

A status led indicates the correct functioning of the 640mA power supply EIB KNX.

4 modules DIN rail mounting.

The p.s. must be connected to the 230V p. line for correct operation.n.

The 2.6" KNX smart touch panel fan coil thermostat controller is a multifunctional control panel. It has an elegant appearance, high quality aluminum frame, only 9mm thick body. The smart touch panel is equipped with temperature sensor, humidity, laser detection. Touch controller has 10 programmable pages in addition to the thermostat and fan coil function. Scenarios, dimmer, on\off switching, curtains, shutters, thermostat, customizable climatic conditions. The icons and language of the smart touch panel thermostat are modifiable via tool Setting of the laser detection sensor up to 120cm with switching objects and dimmers The touch panel requires an additional 12-24V (<50mA) power supply Fan coil thermostat mounting is done via a 55mm wall box Frame included (options: Black, Siver, Bronze)

Smart Touch panel 4" KNX have resolution of 480*480. It was made with elegant appearance, high-grade aluminum frame, body only 9mm thick. The Smart Touch panel 4" KNX integrated multifunction including dimming, switch, scene, curtain, air condition. IT support text, icon, layout,text customization. Are built-in temperature and humidity sensor, support laser function and human body sensing. The smart touch panel 4" KNX  can get weather information through external weather station. 

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

The KNX IP LineMaster 762.1 secure combines the essential functions of a KNX bus line: KNX power supply with choke, KNX IP router and KNX IP interface. In addition to the bus voltage the power supply offers an auxiliary voltage.

The KNX IP router in the KNX IP LineMaster 762.1 secure allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. Using the embedded KNX IP interface, the KNX line can be connected directly to a PC (e.g. by ETS). The device supports KNX Security which can be enabled in ETS. As secure router the device allows coupling of not secured communication on KNX TP to a secured IP backbone. Also for the interface functionality (unneling) KNX security prevents from unauthorized access. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNXnet/IP specification using the core, the device management, the tunneling and the routing part. The KNX IP LineMaster 762.1 secure has an extended filter table for main groupls 0 to 31 and is able to buffer up to 150 telegrams.

The  Binary Input Universal Interfaces achieve the functional applications via conventional push buttons/switches, communicate by technical binary, which are used to control the devices such as the Dimmer Actuator/the Relay Actuator, to control domestic appliance indirectly. At the same time, they also enable the control of LEDs. The extremely compact design enables the device to be inserted in a conventional 60 mm wiring box or another type can be installed in the distribution boards on 35mm mounting rails according to EN60715. 

The Universal Interfaces have many functions that can be used in a wide variety of application areas. The following list provides an overview:

---Switching and dimming function.

---Control of blinds and shutters.

---Sending of values e.g. temperature values、water line.

---Invocate and storing of scenes.

---Trigger an LED for reporting an operation.

---Operation of various loads by multiple push button actions.

---Operation of several loads in a fixed switching sequence.

---Standard counting and differential counting.

Each channel of a device can adopt any of the functions described above.

Universal Input dimmer on-off up-down is used to connect the conventional buttons with the KNX system.The 4-channel KNX Universal Input dimmer on-off is equipped with outputs for 5Vdc status LEDs. While the 8-channel KNX Universal Input dimmer on-off up-down does not have the output for the LED lights. It is a multifunction device for controlling dimmers, on-off switching, movement of shutters and up-down shutters. In addition, the functions of impulse counter, scenario management, forcing values and sequences are provided. The extremely compact design allows you to place the device in a conventional 60mm box. The universal interface connects to the bus via the EIB connection terminals. Universal binary input interface uses no additional supply voltage. the physical address and parameter setting is done using the Engineering ETS design tools.

The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.

Basic functionality of the TP line coupler ITR901-002 is coupling two KNX TP lines (main line and subline) providing galvanic isolation in between. Due to its flexibility ITR901-002 coupler unit can be used as KNX line coupler or KNX area coupler (to connect a TP line to a TP area or backbone) or KNX repeater (without filtering). Operational and filtering states, malfunction and faulty communication are indicated by LEDs. 

Download  DATASHEET

Download DATABASE ETS

• 27-channel 16A relay, configurable as a switch actuator, shutter control, or fan coil function.
• 4-channel 1-10V interface for dimming or analog control.
• 16-channel binary input, with 4 channels supporting NTC sensor input as an option.
• LCD display with manual control for easy operation.
• Built-in logic functions for advanced automation.
• USB Type-C port for firmware updates.

EAE KNX Power Supply - 320 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

EAE KNX Power Supply - 640 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

EAE KNX IP router is used as a line or backbone coupler to ensure communication between KNXnet/IP and TP KNX bus line. Electrical insulation is also achieved between the linked lines.

• EAE KNX IP router is a tunneling and routing device. IPR100 is used as a gateway between IP and KNX bus line for commissioning and monitoring purposes. (It is also possible to simultaneously create 4 KNXnet/IP connections).
• Simultaneous connection to two different KNX systems and transmission of telegrams between the local network and different buses
• IP address assignment manually or by DHCP server
• Option to block or allow telegrams between KNX and IP regarding configured filter table
• Deactivation of filter table using on-device buttons for quick diagnosis
• Functional status information with 6 LEDs on device

Download DATASHEET

Download MANUALE PRODOTTO

Download DATABAESE ETS

• Daily, weekly and yearly program
• 10 years battery-reserve
• Up to 300 permanent switchings by date
• Manual permanent mode
• Automatic sorting of switching times on readout
• Fully automatic daylight saving time
• Elapsed time and pulse counter
• Pulse function
• Cycle function
• Timer function
• Channel button function
• DCF function
• Security by PIN-Code
• Illuminated display
• Data-key function

• Communication with 8 IP cameras with 8 input and 8 output objects each
• Transfer of the camera events to the KNX bus
• Controlling the camera via the KNX bus
• KNX Bus Terminal and Ethernet / IP Connection (POE)
• Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
• Configuration via ETS 5

• Up to 48 telegrams/second routing performance
• Up to 35 telegrams/second tunnelling performance
• Up to five KNXnet/IP tunnel connections
• Integrated display
• 10/100 MBit Ethernet interface
• Power over Ethernet or ext. 16-24 AC or 20-30V DC
• Battery buffered RTC
• SNTP server
• Telnet server

• • Up to 48 telegrams/second routing performance
  • Up to 35 telegrams/second tunnelling performance
  • Up to five KNXnet/IP tunnel connections
  • Integrated display
  • 10/100 MBit Ethernet interface
  • Power over Ethernet or ext. 16-24 AC or 20-30V DC
  • Battery buffered RTC
  • SNTP server
  • Telnet server

Time switch for home automation 8-ch Bus system KNX, Other bus systems None, Daily program, Weekly program, Annual program.External programming, Number of channels 8, Summer-/winter switchover, Radio-controlled (DCF77), GPS (global positioning system), Bus connection included, Sub-clocks controllable over bus-system, Autonomy 70000h, Degree of protection (IP) IP20.

voltage input: 230 V AC (50Hz)

output current: 960 mA

Integrated choke

LEDs for operation, bus reset and programming mode

Integrated bus-connection with voltage and current measurement

Data output on KNX bus via group object and visible on display

KNX objects for voltage, current and power measurements

KNX alarm functions

Housing temperature measurement

AUX with 600mA additional output

The KNX POWER SUPPLY 640mA is a DIN Rail mounted KNX device with integrated choke, to directly power a KNX line. An auxiliary 30V output is available for some extra loads, as displays, binary inputs, …

Doory is an intelligent numeric keypad that allows the remote entry of the access code to facilitate reception operations when you can not be present at the arrival of the customers. The code can be programmed using a dedicated APP to be installed on a Smartphone (iOS or Android). The access key can be renewed and updated whenever it is necessary to receive new guests.  

The KNX USB interface ITR901-003 provides a galvanic isolated bidirectional connection to the bus system via KNX TP and USB. Network configurations become less time-consuming. The device is supplied by both the KNX TP line and USB. No additional external power supply is necessary. 

Download DATASHEET