The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.

KNX IP Interface 732 secure - Interfaccia IP/KNX Compatta Bus Powered con KNX Security.

English description pending.

KNXnet/IP interface with KNX Security, 8 tunnels, Long Frames, bus-powered. Recommended for new installations. 1 DIN module (18 mm). Art. 5248.

Basic functionality of the TP line coupler ITR901-002 is coupling two KNX TP lines (main line and subline) providing galvanic isolation in between. Due to its flexibility ITR901-002 coupler unit can be used as KNX line coupler or KNX area coupler (to connect a TP line to a TP area or backbone) or KNX repeater (without filtering). Operational and filtering states, malfunction and faulty communication are indicated by LEDs. 

Download  DATASHEET

Download DATABASE ETS

• Wireless wall-mounted Infrared PIR motion detector for lighting control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• As soon as it detects movement, the sensor sends the ON signal to the linked receiver and its
  contact keeps closed. The ON time must be set on the receiver.
• Wall or ceiling mounting installation.
• Coverage: 180º and Ø10m at 2m high.
• Power Supply: 2 x 3V AA Lithium batteries L91. Working life over 15 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: IT KNX 001, MI KNX 001 & CO KNX 002.

• Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• It has 2 operation modes:
  · Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 & CO KNX 002.
  · Presence detector: useful for heating and air conditioning control.
• Compatible with the actuators: TM KNX 001 & CO KNX 002.
• Incorporates Temperature sensor
• Coverage: 360º and Ø7m at 2,5m high.
• Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
• Radio-frequency: 868,4MHz.

• Wireless Luminosity sensor transmitter for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brigthness value to the lighting actuator for constant light control operation.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360° angle of coverage, reach 1 – 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls. 

Infrared presence detector Presence Control PRO IR Quattro HD KNX for indoors, ideal for medium to large-size offices, conference and meeting rooms, classrooms and lecture theatres, sports halls and warehouses,installation height up to 10 m,controll 4 lighting channels and HVAC,4800 switching zones for the ultimate in detection quality, presence detection over a true 64 m2, square detection zone. 

IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m  

IS 3360 MX Highbay motion detector – ideal for high ceilings in industrial buildings or commercial properties. For mounting heights of up to 14 m. High-precision 360° infrared sensor. Maximum reach: 18 m. For watching over up to 1000 sq.m 

It is possible to adjust the presence sensor sensitivity in an easy way,selecting between 3 different levels or personalizing by yourself.It includes parameters to define regulation steps,to establish deviations, or to calibrate it.It is also possible to change between auto and manual mode, defining the behavior when it changes between those two options.It also includes an additional thermostat 

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

KNX IP BAOS 774 - Gateway IP/KNX Object Server 1000 Oggetti con Binary V2 e JSON.

English description pending.

English description pending.

Pulsante KNX Weinzierl TP Push Button 420.1 secure – con Termostato Ambiente Integrato, Serie MATCH 55.

English description pending.

English description pending.

Modulo I/O KNX IP Weinzierl Multi IO 580 – 48 Canali Input/Output su Rete IP, Senza Bus TP.

English description pending.

English description pending.

KNX IP BAOS 773 - Gateway IP/KNX con Object Server: Tunneling, Binary V2 e JSON Web Services.

English description pending.

English description pending.

KNX BAOS Module 838 kBerry - Modulo KNX Object Server per Raspberry Pi.

English description pending.

English description pending.

Modulo I/O KNX Weinzierl TP Multi IO 570.1 secure – 48 Canali Input/Output con KNX Data Security.

English description pending.

English description pending.

KNX RF/TP Coupler 673.1 secure - Accoppiatore Radio KNX con Security Proxy e Segment Coupler.

English description pending.

English description pending.

Pulsante 24V Weinzierl 436 – Tastierino Potenziale Libero per Centrali Smart Home e PLC, Serie MATCH 55.

English description pending.

English description pending.

KNX Modbus RTU Gateway 886.1 secure - Gateway KNX/Modbus RS-485 con Isolamento Galvanico.

English description pending.

KNX / Modbus RTU RS-485 gateway with 250 data points, master (25 slaves) / slave, KNX Security, ETS configuration, bus-powered. 1 DIN module. Art. 5498.

KNX Modbus TCP Gateway 716 secure - Gateway KNX/Modbus TCP con Interfaccia IP.

English description pending.

KNX / Modbus TCP gateway with 250 data points, master/slave mode, KNX Security, 8 KNXnet/IP tunnels, ETS configuration. Bus-powered. Art. 5425.

KNX DMX Gateway 544 - Gateway KNX/DMX512 per Controllo Illuminazione RGB/RGBW.

English description pending.

Bidirectional KNX / DMX512 gateway up to 64 channels, master and slave mode, RGB/RGBW, 4 sequencers, ETS configuration. 1 DIN module. Art. 5358.

KNX IP BAOS 774.1 secure - Gateway IP/KNX Object Server con KNX Security e BAOS Security.

English description pending.

KNX/IP object server with 1000 data points, BAOS Binary V2 Secure, KNX Security, 8 tunnels, 10 BAOS connections, bus-powered. 1 DIN module. Art. 5475.

KNX IP Router 752 secure - Router IP/KNX Compatto Bus Powered con KNX Security.

English description pending.

KNXnet/IP router with KNX Security, 8 tunnels, Long Frames, filter 0..31, 150-telegram buffer. Recommended for new installations. 1 DIN module. Art. 5249.

KNX IP Router 751 - Router IP/KNX Compatto Bus Powered con Tabella Filtri Estesa.

English description pending.

KNXnet/IP router with routing and tunneling (5 tunnels), filter table 0..31, 150-telegram buffer, bus-powered. Available while stock lasts. Art. 5243.

KNX IP Interface 740.2 wireless secure - Interfaccia WiFi KNX con KNX Security AES-128.

English description pending.

KNXnet/IP WiFi interface with KNX Security, 6 tunnels, WPA2, integrated access point. ETS programming without LAN cable. Bus-powered. Art. 5537.

KNX IP Interface 731 - Interfaccia Compatta LAN/Ethernet per KNX Bus Powered.

English description pending.

KNXnet/IP programming interface via LAN (5 tunnels). Bus-powered, 1 DIN module (18 mm). Available while stock lasts. Art. 5242.

KNX 0/1..10V / 50 mA dimmer for ECG ballasts + bistable relay 250V~/10A. Compatible with 0..10V valves, scenes, KNX Security. 1 DIN module. Art. 5337.

Attuatore Dimmer/Relè KNX Weinzierl IO 532.1 secure – 1 Uscita PWM LED + 1 Relè, KNX Data Security.

English description pending.

KNX LED dimmer with PWM output 12..24V/6A + bistable relay 250V~/10A. Scenes, staircase, KNX Security, direct ETS control. Art. 5503.

Attuatore Dimmer KNX Weinzierl IO 530.1 secure – 1 Canale Dimmer 230V + 2 Ingressi Binari, KNX Data Security.

English description pending.

KNX universal dimmer 230V~/200W (phase/phase-cut) + 2 inputs, LED retrofit and halogen compatible, scenes, KNX Security. 1 DIN module. Art. 5516.

Attuatore Tapparelle KNX Weinzierl IO 520.1 secure – 1 Uscita Serranda + 2 Ingressi Binari, Calcolo Posizione.

English description pending.

KNX shutter actuator 1 channel 230V~/8A + 2 isolated inputs. Position via time calculation, direct ETS control, KNX Security. 1 DIN module. Art. 5515.

KNX binary input 4 channels for potential dry contacts with KNX Security, integrated logic and timer. 1 DIN module (18 mm). Art. 5514.

Ingresso Binario KNX Weinzierl IO 410.1 secure – 4 Canali 12-230V, Switching/Dimming/Tapparella/Colore/Scena.

English description pending.

KNX binary input 4 channels 12..230 V (DC/AC) with galvanic isolation and KNX Security. Switching, dimming, shutters, scenes. 1 DIN module (18 mm). Art. 5513.

KNX USB Interface 312.1 - Interfaccia USB-C/KNX 1 Modulo con Long Frame APDU 233 e BAOS V2.

English description pending.

DIN rail KNX USB interface (1 module, 18 mm) for ETS programming. BAOS Protocol V2 Secure, KNX Long Frames, USB Type C. Art. 5501.

KNX LineCoupler 650.1 secure - Accoppiatore di Linea KNX con Security Proxy e Segment Coupler.

English description pending.

Compact KNX TP/TP line coupler (1 DIN module, 18 mm) with KNX Security, Security Proxy, galvanic isolation and extended filter table main group 0..31. Art. 5451.

Attuatore Tapparelle KNX Weinzierl IO 522 secure – 6 Canali Relè 230V/16A, Alimentazione Centralizzata.

English description pending.

KNX shutter actuator 6-channel 230V~/16A with electro-mechanical interlock, KNX Security and direct ETS control. KNX Block IO platform, DIN 6 modules (108 mm). Art. 5496.

Attuatore di Commutazione KNX Weinzierl IO 512 secure – 12 Uscite Relè 230V/16A, Alimentazione Centralizzata.

English description pending.

KNX switching actuator with 12 outputs 230V~/16A on DIN rail (72 mm). Central power supply, KNX Security, mains failure detection. Weinzierl KNX Block IO platform.

Attuatore Dimmer LED KNX Weinzierl IO 536 CC (4D) – 4 Uscite a Corrente Costante RGB/RGBW/Tunable White.

English description pending.

The LED Dimming Actuator KNX IO 536 CC (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LLED Dimming Actuator KNX IO 536 CC (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 536 CC (4D) includes 16 independent functions for logic or timer control.

Attuatore Dimmer LED KNX RF Weinzierl Blue IO 553 CC secure – 4 Uscite Wireless Corrente Costante RGB/RGBW/Tunable White.

English description pending.

The KNX RF BLUE IO 553 CC SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator KNX RF BLUE IO 553 CC SECURE can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The KNX RF BLUE IO 553 CC SECURE supports KNX Data Security.

Attuatore Dimmer LED KNX RF Weinzierl Blue IO 552 CV secure – 4 Uscite PWM Wireless RGB/RGBW/Tunable White.

English description pending.

The KNX RF BLUE IO 552 CV SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the KNX RF BLUE IO 552 CV SECURE includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

Attuatore Dimmer LED KNX Weinzierl TP Blue IO 550 CV secure – 4 Uscite PWM RGB/RGBW/Tunable White.

English description pending.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

EAE Accoppiatore di Linea KNX LC200 – Filtro Traffico, Ripetitore, ETS4.2.

English description pending.

EAE Interfaccia IP KNX IPI200 – Tunneling KNXnet/IP, 5 Connessioni Simultanee.

English description pending.

EAE Gateway KNX/Modbus KMG103 640mA – Alimentatore KNX Integrato per Hotel.

English description pending.

EAE Gateway KNX/Modbus KMG103 320mA – Alimentatore KNX Integrato per Hotel.

English description pending.

EAE Alimentatore KNX PS320 – 320mA con Uscita Ausiliaria 30V DC.

English description pending.

EAE KNX Power Supply - 320 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

EAE Alimentatore KNX PS640 – 640mA con Uscita Ausiliaria 30V DC.

English description pending.

EAE KNX Power Supply - 640 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

MD100 KNX movement detector is used in indoor spaces with integrated light sensor to achieve presence detection and constant light functions in a single device.

• Flush or surface mount options
• 9m in diameter movement detection at 2.5 m assembly height
• Integrated light level sensor and movement sensor to achieve constant light function
• Possibility to control air conditioning and ventilation through HVAC
• Adjustable brightness level and duration for “Movement”, “After Movement”, and “No Movement” functions
• Two constant light level adjustments for two states: Vacant & Occupied
• Ability to send movement status periodically with a separate communication object
• Feature to operate as a single sensor when connected with other KNX presence sensors
• Test and calibration modes for convenience during installation
• Does not require an external power supply

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE IP Router KNX IPR100 – Connessioni KNXnet/IP.

English description pending.

EAE KNX IP router is used as a line or backbone coupler to ensure communication between KNXnet/IP and TP KNX bus line. Electrical insulation is also achieved between the linked lines.

• EAE KNX IP router is a tunneling and routing device. IPR100 is used as a gateway between IP and KNX bus line for commissioning and monitoring purposes. (It is also possible to simultaneously create 4 KNXnet/IP connections).
• Simultaneous connection to two different KNX systems and transmission of telegrams between the local network and different buses
• IP address assignment manually or by DHCP server
• Option to block or allow telegrams between KNX and IP regarding configured filter table
• Deactivation of filter table using on-device buttons for quick diagnosis
• Functional status information with 6 LEDs on device

Download DATASHEET

Download MANUALE PRODOTTO

Download DATABAESE ETS

Infrared motion detector IS 345 MX Highbay for indoors, ideal for large heights in depots, high-bay warehouses, machine shops, check-in areas and departure lounges, installation height 14 m, detection zone 30 x 4 m (radial), large terminal compartment for easy installation. Available as square surface-mounted and concealed version.  

• Detection of air quality
  (CO2-concentration, rel. humidity, temperature)
• CO2-sensor (Measuring range 390–10.000 ppm)
• CO2-value is atmospheric pressure compensated
• Sensors for CO2-, temperature, humidity and atmospheric pressure measurement
• Humidity sensor (Measuring range 0...100% rel. humidity)
• Temperature sensor (Measuring range 0°/50°C)
• 5 binary and analogue inputs

• Daily, weekly and yearly program
• 10 years battery-reserve
• Up to 300 permanent switchings by date
• Manual permanent mode
• Automatic sorting of switching times on readout
• Fully automatic daylight saving time
• Elapsed time and pulse counter
• Pulse function
• Cycle function
• Timer function
• Channel button function
• DCF function
• Security by PIN-Code
• Illuminated display
• Data-key function

• Communication with 8 IP cameras with 8 input and 8 output objects each
• Transfer of the camera events to the KNX bus
• Controlling the camera via the KNX bus
• KNX Bus Terminal and Ethernet / IP Connection (POE)
• Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
• Configuration via ETS 5

• Capacitive touch sensor for up to 25mm material size
• Three sensor panels enable button, double-click and wiping-gesture (acustic feedback customizable)
• Sensor panels can be used as one big panel
• Up to six switching options (acustic feedback customizable)
• Plastic housing (210x140x11 mm) robust against splash water
• Reset time programmable by switching timer
• KNX-Bus power required only