868MHz controller Mesh network with ZHAGA socket for use with ZHAGA luminaires in compliance with DALI2 specifications

With the Analog Input Adpater you can connect music sources to certain trivum SoundSystems. The SoundSystem can be far away from the music source, because the adapter used a CAT5/6 cable to transfer the music signal to the SoundSystem.

A 3.5mm stereo jack socket is used for connection.

The SoundSystem must have a trivum AudioBus socket as input. The products RP311 and RP341 are prepared for this.

DIN rail power supply for the trivum REG music actuators.

Voltage: 24V
Power: 100 watts

The RP340 and RP341 require 2 power supplies. For RP010, RP310 and RP311 and RA410 one power supply each.

The SCW speaker has a significantly reduced installation depth of only 80 mm.The SCW165-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The SCW165-S has a high, short-term peak power capacity of 2x 90 watt.With its efficiency factor of 92 dB/W the SCW165-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The SCW165-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

The CW130-S is a stereo speaker. Therefor, it has two separate voice coils for the bass and two separate tweeters with likewise two audio crossovers.The CW130-S has a high, short-term peak power capacity of 2x 75 watt.With its efficiency factor of 90 dB/W the CW130-S belongs to the market leaders in this size.A high impedance of 8 ohm is very important for flush mount speakers since they are usually connected to long cables.The CW130-S has a tweeter level adjustment in order to adjust the sound to spacial and acoustical prerequisites.The loudspeakers impress with clear reproduction and audibility due to the minimization of distortions ans sound intelligibility.The included round and square grills can be exchanged anytime without the need to remove or exchange the speakers.

With 7" TouchPad you have full control of your music. Choose your favorite playlist from Spotify or play music via AirPlay: it's really simple and intuitive. Integrated in a KNX domotic environment, the 7" TouchPad lets you control light, heating and shutters, to mention just a few of the functions. With the KNX control panel editor, it is possible to completely adapt the KNX user interface to your needs.

Including built-in box (cod 500016)

The RA410 is a flexible universal amplifier for the DIN rail.

• Amplifier output with 2x40 Watt.
• Very flexible due to volume control and control input.
• Can be used as universal amplifier for any application or as extension for trivum SoundSystems

The RP010 is streamer and central unit in one. As the smallest model of our REG line it is a complete system. Connect an external amplifier or active speakers, use the trivum SmartPhone App and listen to AirPlay, Spotify, TuneIn and more with the RP010. The small RP010 contains a complete SoundSystem and more.

• Enormously flexible thanks to trivum t3OS operating system
• Preamplifier output with volume control for external power amplifiers
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, NAS, Qobuz and Web URLs.
• Free app for iOS and Android or to use with your browser.
• he RP010 can be used alone for 1 room. It can be combined with other trivum SoundSystems for up to 64 Zone.

The RP341 is a 4-way amplifier with one streamer, one FM tuner and one line input. Independent for 1-5 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 8x30 Watt
• additional variable preamplifier output 
• All 5 outputs share 3 sources: Streaming, Tuner and AUX
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP341 can be used alone for 1-5 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP340 is a 4-way amplifier, streamer and central unit in one. Independent for 4 rooms or in combination with other trivum sound systems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• Very inexpensive Multiroom System for 1 to 4 rooms
• Amplifier output with 8x30 Watt
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP340 can be used alone for 4 zones. It can be combined with other trivum sound systems for up to 64 zones.

The RP310 is an amplifier, streamer and central unit in one. As a complete sound system for one room, it finds its place in the control cabinet. Connect loudspeakers, network and power and immediately the modern SoundSystem is ready to play music via Smartphone App. 

• Enormously flexible via trivum t3OS operating system
• Amplifier output with 2x30 Watt.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to operate via browser
• The RP310 can be used alone for 1 zone. It can be combined with other trivum sound systems for up to 64 zones.

The RP311 is an amplifier, streamer, radio and central unit in one. Independent for 1 to 2 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to  trivum t3OS operating system
• SoundSystem with many sources and connection options  
• Amplifier output with 2x30 Watt 
• additional variable preamplifier output 
• Both outputs share 3 sources: Streaming, Tuner and AUX
• It is also possible to use output 2 for subwoofers.
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• Free app for iOS and Android or to use via browser
• The RP311 can be used alone for 1-2 zones. It can be combined with other trivum sound systems for up to 64 zones.

Thanks to our intuitive app, the system is very easy to use - on smartphones as well as in a web browser or on the trivum TouchPads. Thanks to the trivum t3OS operating system, the trivum SoundSystems are both simple and very flexible. It contains many additional functions that make the RP311 a powerful central unit in any home. 

The trivum InStreamer adds another audio source to your trivum multiroom system. An external audio source, like a CD- or record player, can be connected via analog RCA or digital TOSLINK cable to the InStreamer. On the other hand, the InStreamer is connected via Cat-5 Ethernet cable to your LAN and will be automatically detected and integrated into your trivum system.The InStreamer is automatically detected, as soon as it is connected to the network. All master devices will then have access to the new audio source. Via the WebConfig you also have the option to configure this audio source according to your wishes.

The AudioBox P150 Pro is an amplifier, streamer, Bluetooth receiver, DAB+/FM radio and central unit in one. Independent for 1 to 3 rooms or in combination with other trivum SoundSystems for up to 64 rooms.

• Enormously flexible thanks to trivum t3OS operating system
• Amplifier output with 2x150 Watt
• additional 2 preamplifier outputs (for further rooms or e.g. subwoofer)
• Streaming Client with HD Audio - 192kHz with 32Bit
• Streams music from TuneIn, AirPlay, Spotify, Deezer, Tidal, Qobuz, NAS and Web URLs.
• All 3 outputs can access 7 sources: 3xStreaming, DAB+/FM Radio, Bluetooth, Digital Input, Analog Input
• 7 freely configurable keys can switch sources, play favourites or trigger macros or KNX
• The AudioBox P150 Pro can be used alone for 1-3 zones. It can be combined with other trivum SoundSystems for up to 64 zones.
• With 200mm x 60mm x 240mm (WxHxD) the AudioBox P150 Pro is very compact and finds its place everywhere.

• Single wall unit section 3 unit ideal for small installations
• Door in tempered safety glass, removable and reversible, key lock
• Fixed blind side panels, not removable
• Adjustable 19 "front struts
• Useful depth: 270 mm)
• Color: RAL 9005 (black)
• Dimensions: 185 x 600 x 320 mm (AxLxP)

• Server Rack 19 "Rack 600x1000 12 Unit Black from under-desk
• Removable panels and doors to facilitate equipment installation
• Reversible glass front door with quick release hinges and lockable key handle
• Reversible metal rear door with key lock handle and provision for the installation of ventilation fans
• Blind, removable side panels with key locks
• Roof prepared with drilling for ventilation system and provided with pre-cut profiles for cable entry
• Fund prepared for cable entry through pre-cut profiles
• Complete with a pair of 19 "front and rear uprights
• Complete with adjustable feet and wheels
• IP20 degree of protection according to EN 60529
• Color: RAL9005 (Black)
• Dimensions: (A x W x D) 670 x 600 x 1000 mm
• Useful depth: 940 mm

• Server Rack 19 "Cabinet 600x800 12 Unit Black from under-desk
• Removable panels and doors to facilitate equipment installation
• Reversible glass front door with quick release hinges and lockable key handle
• Reversible metal rear door with key lock handle and provision for the installation of ventilation fans
• Blind, removable side panels with key locks
• Roof prepared with drilling for ventilation system and provided with pre-cut profiles for cable entry
• Fund prepared for cable entry through pre-cut profiles
• Complete with a pair of 19 "front and rear uprights
• Complete with adjustable feet and wheels
• IP20 degree of protection according to EN 60529
• Color: RAL9005 (Black)
• Dimensions: (A x W x D) 670 x 600 x 800 mm
• Useful depth: 740 mm

Thinka for KNX allows you control your home with Siri and Alexa.

Thinka allows you to manage your lights, switches, curtains, (Venetian) blinds and climate control. And it reads sensors such as temperature, humidity, CO2, motion, contact and occupancy.

You can use Apple's Home App on your iPhone or iPad to switch on lights, close the curtains or turn up the heat. Or do it all at once with HomeKit scenes. And share with all people in your household.

The Thinka is typically installed on the DIN-rail, connected to KNX via twisted pair, Ethernet and power. 

Scarica MANUALE 

Video    INSTALLAZIONE

Video    PROGRAMMAZIONE

EAE Oria Termostato KNX LCD 4 Pulsanti INT-OT4.

English description pending.

Oria thermostats are offered in three different colour s: Pearl White, Mustang gray and Anthracite.

Monitoring climate via digital LCD

Internal temperature sensor (°C/ °F)

Adjustable fan speed (1, 2, 3, Automatic)

Multiple operation modes (Comfort, Night, Outdoor, Indoor)

Fully automatic operation feature (hot-cold transition)

Ability to control different HVAC units including VRF-VRV

PI relative, PI on-off (PWM), On/Off, Fan coil, Split unit

Installation ability to 60x60 mm standard switch junctions

4 dependent or 8 independent programmable buttons for various functions:

• Switching
• Dimming
• Shutter/Blind control
• Value and priority assignment
• Scene control
• Status notification LEDs

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE Oria Termostato KNX LCD 3 Pulsanti INT-OT3.

English description pending.

Oria thermostats are offered in three different colour s: Pearl White, Mustang gray and Anthracite.

Monitoring climate via digital LCD

Internal temperature sensor (°C/ °F)

Adjustable fan speed (1, 2, 3, Automatic)

Multiple operation modes (Comfort, Night, Outdoor, Indoor)

Fully automatic operation feature (hot-cold transition)

Ability to control different HVAC units including VRF-VRV

PI relative, PI on-off (PWM), On/Off, Fan coil, Split unit

Installation ability to 60x60 mm standard switch junctions

3 dependent or 6 independent programmable buttons for various functions:

• Switching
• Dimming
• Shutter/Blind control
• Value and priority assignment
• Scene control
• Status notification LEDs

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE Oria Termostato KNX LCD 2 Pulsanti INT-OT2.

English description pending.

Oria thermostats are offered in three different colours: Pearl White, Mustang gray and Anthracite.

Monitoring climate via digital LCD

Internal temperature sensor (°C/ °F)

Adjustable fan speed (1, 2, 3, Automatic)

Multiple operation modes (Comfort, Night, Outdoor, Indoor)

Fully automatic operation feature (hot-cold transition)

Ability to control different HVAC units including VRF-VRV

PI relative, PI on-off (PWM), On/Off, Fan coil, Split unit

Installation ability to 60x60 mm standard switch junctions

2 dependent or 4 independent programmable buttons for various functions:

• Switching
• Dimming
• Shutter/Blind control
• Value and priority assignment
• Scene control
• Status notification LEDs

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE Alimentatore KNX PS320 – 320mA con Uscita Ausiliaria 30V DC.

English description pending.

EAE KNX Power Supply - 320 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

EAE Alimentatore KNX PS640 – 640mA con Uscita Ausiliaria 30V DC.

English description pending.

EAE KNX Power Supply - 640 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

MD100 KNX movement detector is used in indoor spaces with integrated light sensor to achieve presence detection and constant light functions in a single device.

• Flush or surface mount options
• 9m in diameter movement detection at 2.5 m assembly height
• Integrated light level sensor and movement sensor to achieve constant light function
• Possibility to control air conditioning and ventilation through HVAC
• Adjustable brightness level and duration for “Movement”, “After Movement”, and “No Movement” functions
• Two constant light level adjustments for two states: Vacant & Occupied
• Ability to send movement status periodically with a separate communication object
• Feature to operate as a single sensor when connected with other KNX presence sensors
• Test and calibration modes for convenience during installation
• Does not require an external power supply

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE IP Router KNX IPR100 – Connessioni KNXnet/IP.

English description pending.

EAE KNX IP router is used as a line or backbone coupler to ensure communication between KNXnet/IP and TP KNX bus line. Electrical insulation is also achieved between the linked lines.

• EAE KNX IP router is a tunneling and routing device. IPR100 is used as a gateway between IP and KNX bus line for commissioning and monitoring purposes. (It is also possible to simultaneously create 4 KNXnet/IP connections).
• Simultaneous connection to two different KNX systems and transmission of telegrams between the local network and different buses
• IP address assignment manually or by DHCP server
• Option to block or allow telegrams between KNX and IP regarding configured filter table
• Deactivation of filter table using on-device buttons for quick diagnosis
• Functional status information with 6 LEDs on device

Download DATASHEET

Download MANUALE PRODOTTO

Download DATABAESE ETS

EAE Interfaccia Universale KNX UI108 – 8 Canali, 6 Modalità Operative.

English description pending.

Colored connection cables

Flush mounted into switch boxes

Does not require an external power supply

8 input channels with each featuring following functions:

• Switching
• Dimming
• Curtain control
• Value and priority
• Scene control
• Pulse counter

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

Download DATABASE ETS

EAE Attuatore KNX SA108 – 8 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Attuatore KNX SA104 – 4 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Room Control Unit RCU0800 – 8 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installatio n of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1200 – 12 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers al l requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1600 – 16 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electr ical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU2000 – 20 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU0808 – 8 Uscite 16A, 8 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1616 – 16 Uscite 16A, 16 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

EAE Gateway KNX-DALI DA110 – Controllo Individuale 64 Dispositivi DALI.

English description pending.

Up to 64 DALI devices connectable to DALI Bus (electronic ball st, LED driver, ECK)

Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)

16 DALI Groups and 64 different lighting scenes

Each DALI group configurable to function as constant light, corridor or sequence function

Functional and battery life tests for DALI compliant emergency lighting fixtures to be sent through KNX

Monitoring Fault status of DALI devices as different KNX group objects

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE DI INSTALLAZIONE

Download SOFTWARE DALI TOOL

Download DATABASE ETS

EAE Gateway KNX-DALI DA100 – Controllo 64 Dispositivi DALI, 16 Gruppi, Emergenza ECK.

English description pending.

Up to 64 DALI devices connectable to DALI Bus (electronic ballast, LED driver, ECK)

Used with EAE DALI Commissioning Tool for DALI operations (addressing, grouping etc.)

16 DALI Groups and 64 different lighting scenes

Each DALI group configurable to function as constant light, corridor or sequence function

Functional and battery life tests for DALI compliant emergency lighting fixtures to be sent through KNX

Monitoring Fault status of DALI devices as different KNX group objects

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE DI INSTALLAZIONE

Download SOFTWARE DALI TOOL

Download DATABASE ETS

R27A is a fashionable, SIP-enabled IP video door phone with a RF card reader and a numeric keypad. It enables easy monitoring of an entrance area and convenient entry control. The ability of granting or denying access based on talking to and seeing your visitors as if in person, gives one a true sense of security and great peace of mind. 

• Premium audio and video quality
• Real-time entrance monitoring
• Remote door opening 
• RF card reader and numeric keypad
• SIP/ONVIF/Wiegand/PoE/IP65
• Anti-cold version available

Physical Features

• Body material: aluminum panel
• Camera: 3M pixels, with automatic lighting
• Button: 1 call button
• RF card reader: 13.56MHz
• PoE IEEE802.3af
• Power consumption: 12V DC input, <12W
• G-sensor for tamper alarm
• Enclosure rating: IP65
• Installation: flush mounting or wall-mounting
• Dimensions: 190x110x35mm

Download Datasheet

R27A is a fashionable, SIP-enabled IP video door phone with a RF card reader and a numeric keypad. It enables easy monitoring of an entrance area and convenient entry control. The ability of granting or denying access based on talking to and seeing your visitors as if in person, gives one a true sense of security and great peace of mind. 

• Premium audio and video quality
• Real-time entrance monitoring
• Remote door opening 
• RF card reader and numeric keypad
• SIP/ONVIF/Wiegand/PoE/IP65
• Anti-cold version available

Physical Features

• Body material: aluminum panel
• Camera: 3M pixels, with automatic lighting
• Button: manager center, dial key and clear key
• Keypad: numeric keypad
• RF card reader: 13.56MHz and 125 kHz
• PoE IEEE802.3af
• Power consumption: 12V DC input, <12W
• G-sensor for tamper alarm
• Support infrared sensor
• Enclosure rating: IP65 
• Operating Temperature: -4° to 131°F / -20° to 55°C (Anti-cold version available: -40 ~ 131 °F / -40 ~ 55°C)
• Installation: flush mounting or wall-mounting
• Dimensions: 280x130x68mm

Download Datasheet

R29S is the industry’s most cutting-edge SIP-enabled IP video door phone featuring Android OS and a large capacitive touch screen. It enables easy monitoring of an entrance area and convenient entry control.

• ● 7-inch large touch screen
• ● Premium audio and video quality
• ● Real-time entrance monitoring
• ● Remote door opening
• ● Multiple access methods
• ● Android 5.1/SIP/ONVIF/Wiegand/PoE/IP65

Entry Features

• RF card reader: 13.56MHz & 125kHz
• Digital keypad: Pass Number
• Facial recognition: 32 points of recognition
• Other biometric method: gesture.

Download DATASHEET

The DND/MUR (Do Not Disturb / Make Up Room) module is a simple way for guests to communicate with staff from their room. Either don't want to be disturbed or need your room to be cleaned, it is as simple as touching a button. The product includes a doorbell button to announce visitors in a kindly way. Besides, optionally the doorbell can be disabled whether the “Do Not Disturb” is active. Module needs an extra 12-24V VDC power supply for LEDs.

Scarica DATASHEET

Scarica MANUALE 

Scarica DATABASE ETS

iSwitch is a wall-mounting room controller with LCD device for on/off switching of loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. The product is equipped with integrated temperature sensor, humidity sensor and ambient sensor. iSwitch can act as a room probe or thermostat, both in heating and cooling mode.Body gateway included

iSwitch is a wall-mounting room controller device for on/off switching of loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. The product is equipped with integrated temperature sensor, humidity sensor and ambient sensor. iSwitch can act as a room probe or thermostat, both in heating and cooling mode.Body gateway included

• Wireless 1-channel blind/shutter actuator or 2-channel switching actuator.
• Up to 16A switching capacity per channel with 2 free-voltage outputs.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Includes 2 auxiliary inputs which allow the local control.
• Dimensions: 107 x 53 x 34mm.
• 230V-operated.
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 002 & CO KNX 002.

• The 4-channels Analog/Digital interface is equipped with 4 independent channels which may be used as inputs for Analog or Digital signals.
• Each channel may be used depending on the parameterization by the ETS:
  • Binary input: the interface can evaluate at its potential-free inputs up to 4 pushbutton/switch states and send the corresponding telegram according to the configured setting as: Switch, Dimmer, Multiple Switch, Sequential Switch, Shutter/Blind control, Scene Control, Fixed/Forced value or Counter.
  • Analogue input: temperature sensor by connecting an external temperature probe (ST KNT 001 or ST KNT 002).
• Can be configured and enabled up to 4 independent Thermostats.
• Flush-mounting within universal box, behind the pushbutton/switch.
• The inputs are protected against short-circuit, overload and wrong polarity.
• Supply from the Bus. External supply is not required.
• Built-in KNX BCU (Bus Coupler Unit).
• Programming and commissioning by ETS4 or later.

• Wireless Temperature sensor transmitter with Probe for heating floors.
• It sends the temperature value in the place where the probe is installed.
• Specially-indicated for underfloor heating installations.
• Includes the following components:
  · Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
    receiver.
  · Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
    directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
    waterproof.
• The temperature value is sent every minute.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Power supply: 230V~ 50Hz.
• Dimensions: 45 x 42 x 12mm.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Wireless Luminosity value transmitter for Sun protection function.
• It is designed for the automatic control of shutters or blinds.
• According to the measured luminosity, it controls the raising or lowering of the shutters/ blinds to provide sun protection.
• Luminosity is measured by the sensor attached to the window with a sticker.
• Incorporates 4 different operation modes configurable by two small switches: Solar Alarm, Blind Control, Blind Control with manual lift and Lux Sensor.
• Dimensions: 78 x 28 x 23mm.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: PE KNX 001 & CO KNX 002.

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

Infrared motion detector IS 345 MX Highbay for indoors, ideal for large heights in depots, high-bay warehouses, machine shops, check-in areas and departure lounges, installation height 14 m, detection zone 30 x 4 m (radial), large terminal compartment for easy installation. Available as square surface-mounted and concealed version.  

BX-TU is the innovative push button interface equipped with an external temperature and humidiy probe to perform thermostat functions, humidy and dew point temperature control.The device is developed without a display unit or local buttons, therefore, setpoint temperature adjustment and visualization can be exclusively carried out via a Blumotix supervision system.

• Aluminum housing 
• Display: 4.3inch TFT with advanced GUI 
• Working voltage: DC 24V (support POE ) 
• Card Supported: IC/ID card 
• Support intercommunication function 
• Support tamper alarm
• IPX4 waterproof    

• Detection of air quality
  (CO2-concentration, rel. humidity, temperature)
• CO2-sensor (Measuring range 390–10.000 ppm)
• CO2-value is atmospheric pressure compensated
• Sensors for CO2-, temperature, humidity and atmospheric pressure measurement
• Humidity sensor (Measuring range 0...100% rel. humidity)
• Temperature sensor (Measuring range 0°/50°C)
• 5 binary and analogue inputs

• Daily, weekly and yearly program
• 10 years battery-reserve
• Up to 300 permanent switchings by date
• Manual permanent mode
• Automatic sorting of switching times on readout
• Fully automatic daylight saving time
• Elapsed time and pulse counter
• Pulse function
• Cycle function
• Timer function
• Channel button function
• DCF function
• Security by PIN-Code
• Illuminated display
• Data-key function

• Two-point ON / OFF control
• Shutter Control (Heat Shut Off contact)
• Motion detector (intrusion)
• Thermoregulation with radiator control
• Remote Control (Optional)

• Proportional control
• Manual override
• Stroke detection
• Mode, status and position indication
• Stroke limitation setting
• Valve blockage protection
• Valve clogging detection
• Error safe position
• Diagnostic/Logging
• 1 binary input, cable 1m 

• Communication with 8 IP cameras with 8 input and 8 output objects each
• Transfer of the camera events to the KNX bus
• Controlling the camera via the KNX bus
• KNX Bus Terminal and Ethernet / IP Connection (POE)
• Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
• Configuration via ETS 5

SynOhr® MultiSense KNX Premium:

• MultiSense KNX Standard command
• Self-sufficient Speech Recognition with 40 commands
• Speech recognition wildcard commands
• Monitoring of noise levels (as a baby monitor)
• Display of 28 characters with auto-scrolling on the dot matrix
• Use of the dot matrix on the display of icons
• Different Effects for the Ring and Ambient lightning
• Master/slave mode 

• Capacitive touch sensor for up to 25mm material size
• Three sensor panels enable button, double-click and wiping-gesture (acustic feedback customizable)
• Sensor panels can be used as one big panel
• Up to six switching options (acustic feedback customizable)
• Plastic housing (210x140x11 mm) robust against splash water
• Reset time programmable by switching timer
• KNX-Bus power required only

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

• Up to 48 telegrams/second routing performance
• Up to 35 telegrams/second tunnelling performance
• Up to five KNXnet/IP tunnel connections
• Integrated display
• 10/100 MBit Ethernet interface
• Power over Ethernet or ext. 16-24 AC or 20-30V DC
• Battery buffered RTC
• SNTP server
• Telnet server

• • Up to 48 telegrams/second routing performance
  • Up to 35 telegrams/second tunnelling performance
  • Up to five KNXnet/IP tunnel connections
  • Integrated display
  • 10/100 MBit Ethernet interface
  • Power over Ethernet or ext. 16-24 AC or 20-30V DC
  • Battery buffered RTC
  • SNTP server
  • Telnet server

IT is a bidirectional meter for measurement of active and reactive energy or power, respectively. Further it features an analysis of power supply quality.Measurements can be performed in a 3-phase system or in three independent 1-phase system.(current, voltage, active power, reactive power, active energy, reactive energy, power factor, THD-U, THD-I harmonics, unbalanced load, zero system current) 

• Voltage: 24 V DC via KNX BUS
• typ. power input: 7 mA
• Detection area: vertical 360°
• Range:
  max. Ø 24 m across
  max. Ø 8 m towards
  max. Ø 6,4 m smaller movements
• Recommended mounting height: 2.5 m
• Degree / class of protection: IP20 / Class II
• Ambient temperature: -25 °C to +55 °C
• Housing: Polycarbonate, UV-resistant
• Brightness set value: 5 - 1200 Lux 

he available parameters allow you to define the following outputs:

• Meter value (m³)
• High-resolution meter value (10 l)
• Meter status 
• Serial number and meter number 
• Relative up counter Meter value / Reset
• Relative down counter Meter value / Reset / Zero
• Output 15min / 60min difference (m³)
• Due date billing Date / Set     

he available parameters allow you to define the following outputs:

• Meter value (m³)
• High-resolution meter value (10 l)
• Meter status 
• Serial number and meter number 
• Relative up counter Meter value / Reset
• Relative down counter Meter value / Reset / Zero
• Output 15min / 60min difference (m³)
• Due date billing Date / Set     

The KNX-Sensor Temperature SK01-T-ESTF-50-Silikon with the probe is used for temperature detection of fluid and gaseous media in piping and tubes. The integrated KNX bus coupler does not need additional auxiliary supply.The transducer with the bus coupler is enclosed in a durable, sealed,glass ball-reinforced plastic casing which fulfils protection degree IP65.