Fan Coil LoRaWAN Thermostat is an advanced touch screen room thermostat specifically developed to supervise the operation of fans and valves in air conditioning applications where a fan coil unit (FCU) is adopted. By continuously comparing the room temperature with the preset desired temperature, the Fan Coil LoRaWAN Thermostat allows both proactive management and automatic control based on predefined logic. This ensures the LoRaWAN Fan Coil Thermostat achieves optimal comfort and energy efficiency in the controlled environment. With wireless sensing and easy setup, the fan coil thermostat offers reliable and convenient optimization of room temperature arrangement. It is compatible with all standard LoRaWAN® gateways, enabling real-time monitoring of environmental status for effective remote management

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

Alimentatore KNX Weinzierl PowerSupply USB 367 – 640mA con Display OLED, Interfaccia USB e Funzioni Logiche.

English description pending.

USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.

KNX PowerSupply DGS 366 - Alimentatore Bus 640mA con Display OLED e Diagnostica.

English description pending.

640mA BUS Power Supply DGS 366 (AUX 30V) is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA BUS Power Supply DGS 366 (AUX 30V) device has a bus choke and also provides an output for the auxiliary power supply. The integrated KNX node on the 640mA power supply monitors the output current, the bus voltage and the temperature in the switchboard. 640mA BUS Power Supply DGS 366 (AUX 30V) has several logic functions which are available for application purposes. The configuration of BUS DGS is done with the ETS (version 4.2 or later). An easy-to-read front panel OLED display on the DGS BUS allows the user to view operating parameters locally on the device.

Smart Current Transformer LoRaWAN is an intelligent current transformer for remote energy monitoring and consumption analysis. The CT10x Smart Current Transformer LoRaWAN device provides multiple current options to suit energy monitoring and supports sending threshold alarms. Smart Current Transformer LoRaWAN is compact size and clamp design allows it to be installed in any interior space quickly and safely without de-energizing a structure, simplifying installation and saving costs. The current transformer complies with all gateways on the market. Thanks to the Milesight LoRaWAN® gateway and Milesight IoT Cloud solution, CT10x can be monitored remotely via web page or mobile app. CT10x is used for electricity generation monitoring, smart building billing, machine failure detection and prevention, etc.

HCHO & Environmental Monitoring The AM300 Series Indoor E-Ink Display is a compact sensor for indoor use. The Environmental Sensor measures weather parameters such as temperature, humidity, light, barometric pressure. AM300 also detects the concentrations of volatile organic compounds CO2, level of HCHO / O3, TVOC, PM2.5, PM10. Finally, for a complete monitoring of the environment, it is equipped with Pir to detect the presence in the environment. The data will be displayed on the E-ink screen in real time, which helps to measure the indoor environment and comfort. AM300 series is widely used for office, shop, classroom, hospital, etc. Data from the HCHO sensor & E-Ink Display Environmental Monitoring is transmitted using LoRaWAN technology. By combining the Milesight LoRaWAN gateway and Milesight IoT Cloud, users can manage all sensor data remotely and visually.

• Universal Interface with 4 binary inputs and 4 LED outputs.
• The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for
  connection of conventional pushbuttons, free-voltage motion detectors, etc.
• The interface can evaluate at its potential-free inputs up to 4 pushbutton/switch states with a
  common reference potential and send the corresponding telegrams.
• The telegrams may be for switching or dimming, blind/shutter control, value transmitter applications
  (light level, temperature,…), light scene control or pulse counting.
• As an alternative, the four channels can control four LEDs as independent outputs.
• The outputs are protected against short circuits, overload and wrong polarity.
• This device is flush mounted in a universal box, behind the pushbutton/switch.
• Dimensions: 38 x 42 x 15mm.
• Programming and commissioning by ETS4 or later.

KNX Multi-Zone Heating Kit - 5 Zones with 5G LTE Remote Control

Pre-configured KNX kit for complete heating control across 5 independent zones. Includes 5G LTE router for remote access via smartphone, tablet or PC without relying on home Wi-Fi. Touch thermostats, 8-channel actuator, web server and full ETS programming included. Compatible with boilers and heat pumps. Eligible for Italian tax deduction Bonus Domotica 2026.

The components in the image are indicative.

Kit KNX "Multi-Zone Heating & Remote Control" controls the 2-point heating system distributed in 5 separate zones.For each zone, a thermostat and temperature sensor are provided, which through the actuator controls the opening and closing of the individual electrovalve and the boiler. The web server allows remote control of smartphones, PCs and tablets. 

Ingresso Binario KNX DATEC 1630.03160/62100 – 8 Canali da Incasso con 8 LED di Stato.

English description pending.

Attuatore di Commutazione KNX DATEC 1630.03160/61100 – 4 Canali 10A da Incasso con Ingressi Binari.

English description pending.

SMART ENERGY METER  is a 5-80A 220V Class 1 50Hz IP51 degree Lorawan smart meter with a prepayment function. The communication is Lorawan and ttl, for Lorawan the frequency band is EU868MHz,and AS923MHz and US915MHz under preparation. It can measure the active energy, active power, voltage, current, frequency, power factor etc. With the built-in latching relay, it can cut off remotely when insufficient credit. Din rail installation hence it's easy to fit, LCD displaying, you can readout and paging by button. It's excellent for long-range communication and widely used in smart home and smart city.

IoT Controller I/O Solar Charging Multi-Interface Converter is an external LoRaWAN node controller used for acquiring data from multiple sensors. Contains various I / O interfaces such as analog inputs, digital inputs, digital outputs, serial ports. IoT Controller I/O Solar Charging Multi-Interface Converter r simplifies the implementation and replacement of LoRaWAN networks. UC501 I / O can be easily and quickly configured via NFC or wired USB port. IoT Controller I/O Solar Charging Multi-Interface Converter  is suitable for all internal and external applications. The UC501 I / O provides solar or integrated battery power and is equipped with an IP67 enclosure and M12 connectors. The I / O controller can be installed in harsh environments.

• Wireless Luminosity sensor transmitter with setpoint temperature value knob for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brightness value and the setpoint value to the lighting actuator.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

IoT-LoRa Controller UC300 is used for remote control and data acquisition from different devices. The Controller UC300 controller contains multiple I/O interfaces. IoT-LoRa Controller has analog input, digital input, relay output, serial port, PT100RTD input. The inputs of the IoT-LoRa Controller UC300 support remote device data transmission via LoRaWAN. UC300 LoRaWAN supports multiple trigger conditions and actions that can work autonomously. The automations are guaranteed even in the event of a grid failure. Combined with Milesight IoT Cloud solution, it can easily monitor and control remote devices via web server or mobile app. IoT-LoRa Controller UC300 features industrial design and IP30 metal case. UC300 is widely used in building automation, industry 4.0 etc applications

Gas-LoRa Ultrasonic Smart Meter V2 G-2.5 is an ultrasonic gas meter (therefore with low insertion loss) based on LoRaWAN technology. The Smart Meter is ideal for prepaid gas supply services (Pay per Use). Thanks to the Gas-LoRa shut-off valve Ultrasonic Smart Meter can interrupt the gas supply. The Ultrasonic Smart Meter allows monitoring of the achievement of the maximum budget foreseen or of anomalous data (possible losses). Gas-LoRa is the ideal device also for Building Automation systems where hourly consumption monitoring is required. Gas-LoRa Ultrasonic Smart Meter is mainly suitable for charge control of natural gas, liquefied petroleum gas, biogas and other gases with working pressure of 0.5-20kPa. This product complies with the GB/T 39841-2021 standard.

• The KNX RF / TP coupler is a compact KNX Radio coupler. Connect the KNX RF devices of a radio line with the KNX Twisted Pair Bus.
• You have a filter table (8k bytes).
• Supports long frames compatible with ETS® ETS5 or higher software.
• The keys on the front allow you to disable the telegram filter for testing purposes.
• The LEDs indicate the operating conditions and communication errors on the KNX bus.
• The power supply is supplied via the KNX bus (main line).
• Programming and commissioning using ETS5 or later.

Attuatore KNX Fancoil DATEC 1630.02120/55100 – Singola Valvola Riscaldamento/Raffrescamento Analogica o PWM DIN.

English description pending.

Attuatore KNX Motor Control DATEC 1630.03141/65100 – Comando Ventilatore a Soffitto da Incasso 230VAC 100W.

English description pending.

The KNX to DALI2 Gateway is a DIN rail module for installation in the distribution board on a 35 mm mounting rail. It is a DALI single-master controller to DALI standard IEC 62386 Parts 101ed2 and 103ed1.The gateway is suitable for use with DALI and DALI-2 systems.It supports Device Type 6, Device Type 8 Tc, Device Type 8 XY coordinate, Device Type 8 RGB with DALI interfaces to IEC 62386 and their integration in a KNX building installation. The DALI gateway has 2 channels DALI output. Up to 64 DALI devices can be connected to each DALI output. DT6 and DT8 devices can all be connected to each DALI output in a mixed configuration. The lamps connected to each DALI channels are controlled via KNX using:broadcast;64 individual lamps;16 lighting groups;16 scenes

IBox CoWork Kit offers a smart building monitoring and control solution with LoRaWAN technology. The IBox CoWork Kit easy to install and includes a series of sensors, gateways and cloud platform. IBox CoWork Kit can transform your environment into an intelligent, interconnected and comfortable space. The Kit consists of the following sensors:

• VS121 AI Workplace Sensor
• WS156 LoRaWAN® Smart Scene Panel
• UG63 Mini LoRaWAN Gateway
• WS101 LoRaWAN Smart Button
• WS202 PIR & Light Sensor
• WS301 Magnetic Contact Switch

IBox Smart Building Kit offers a smart building monitoring and control solution with LoRaWAN technology. The Kit is easy to install and includes a series of sensors, gateways and cloud platform. IBox Smart Building Kit can transform your environment into an intelligent, interconnected and comfortable space. The Kit consists of the following sensors:

• UC300 IoT Controller
• UG65 LoRaWAN Gateway
• EM300 Environment Monitoring Sensor
• WS101 LoRaWAN Smart Button
• WS301 Magnetic Contact Switch
• AM103 Indoor Ambience Monitoring Sensor

The Kit is compliant with legacy equipment / sensors. IBox Smart Building Kit covers comp

iBox IAQ Kit offers a smart building monitoring and control solution with LoRaWAN technology. iBox IAQ Kit is easy to install and includes a set of sensors, gateways and cloud platform. This iBox IAQ Kit can transform your environment into a smart, interconnected and comfortable space. The iBox LoRaWAN Kit consists of the following sensors:

• AM307 7-in-1 IAQ Sensor
• AM319 9-in-1 IAQ Sensor
• AM103 3-in-1 IAQ Sensor
• AM103L 3-in-1 IAQ Sensor
• UG63 Mini LoRaWAN Gateway

Gas-LoRa Ultrasonic Smart Meter is an ultrasonic residential gas meter with LoraWAN communication. The Gas-LoRa meter is used to measure the volume of natural and liquefied gas used, with conversion at standard conditions of 20°C. Residential Gas-LoRa is a product from the size range G-1.6, G-2.5, G-4. The Gas-LoRa Ultrasonic Smart Meter is made in a compact design. It has no moving mechanical parts and allows for mounting in a confined space. The meter measurement system provides high-precision metrological characteristics.

• Minimum flow rate Qmin, m³/h 0.0.25
• Transient flow rate Qt, m³/h 0.4
• Maximum flow rate Qmax, m³/h 0.4
• Qmax 4.00 m3/h
• Working pressure 10.00KPa
• Supply voltage 3.6V
• Excessive ambient pressure, kPa ≤50
• Ambient temperature, °C -25…+75
• Gas temperature, °C -25…+55
• Lithium battery voltage, 3.6V
• Overall dimensions LxPxH, mm 82x85x193
• Weight kg 0.9
• Average useful life, years >15
•   Connection size 1" (3/4")
• IP54 ingress protection rating

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

EAE Room Control Unit RCU2018 – 20 Uscite 16A, 18 Ingressi KNX.

English description pending.

EAE Room Control Unit RCU2018 – 20 Uscite 16A, 18 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Wireless 1-channel Thermostat actuator for HVAC control.
• It incorporates a potentiometer which allows setting the desired temperature avoiding any undesired manipulation.
• Every time it receives a signal of temperature from the sensor it will be compared with the already set in the thermostat and will act accordingly on its relay.
• It also can receive telegrams from door/window contacts or presence detectors.
• Up to 16A switching capacity with free-voltage relay.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Modular installation device. DIN-rail mounting. 1-module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: SE KNX 001, SE KNX 003, SE KNX 004, DP KNX 001 & CO KNX 002.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

• Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• It has 2 operation modes:
  · Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 & CO KNX 002.
  · Presence detector: useful for heating and air conditioning control.
• Compatible with the actuators: TM KNX 001 & CO KNX 002.
• Incorporates Temperature sensor
• Coverage: 360º and Ø7m at 2,5m high.
• Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
• Radio-frequency: 868,4MHz.

• Wireless Luminosity sensor transmitter for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brigthness value to the lighting actuator for constant light control operation.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

• Wireless Temperature sensor with desired temperature value control knob.
• This sensor sends the following variables:
  · Measured temperature value.
  · Temperature setpoint value.
  · State (Standby or Auto).
• Incorporates a wheel to set the desired temperature in the room.
• Battery-operated: 1 x 3V Lithium battery CR2450. Useful life higher than 8 years.
• Dimensions: 80 x 30 x 26mm.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• The Radio Remote Control sends KNX telegrams when one of the keys is presse depending on its parameterisation.
• The KNX-RF hand-held remote control transmits KNX telegrams wirelessly when the key is pressed.These could include telegrams for switching, dimming, blind/shutter control or lighting scenes saving/recovering.
• Incorporates 5 independent channels, 1 main channel and 5 scene channels.
• Battery-operated: 1 x 3V Lithium battery CR2032. Useful life higher than 8 years.
• Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.

• The 1-channel Pushbutton sends KNX telegrams when the button is pressed depending on its parameterisation through its switches.
• The device provides functions like switching or dimming of lighting, moving of blinds and shutters,managing scenes,…
• Dimensións: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Switch ON / OFF & Toggle: connects, disconnects or switches the linked actuator. It sends On / OFF / Toggle depending on the configuration.
• Dimmer: connects, disconnects or dims the linked actuator. It sends On / Off / Toggle or Dimming_Up / Dimming_ Down depending on the configuration.
• Blinds / Shutters: controls a linked blind actuator. It sends Step_Up / Step¨_Down or Move_Up / Move_ Down depending on the configuration.
• Scenes: saves and recovers one scene (0…4) depending on the configuration.
• Battery-operated: 2 x 3V Lithium batteries CR2025. Useful life higher than 8 years.
  Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.

• One channel interface for 2-fold pushbutton.
• Dimmer: Connects, disconnects or dims the linked actuator. It sends ON/OFF or Dimming_Up/Dimming_Down depending on which of the two buttons is pressed the duration of the action.
• Blinds/Shutters: Controls a linked blind actuator. It sends Step_Up/Step_DOwn or Move_Up/Move_Down depending on which of the two buttons is pressed and the duration of the action.
• Scenes: Saves and recovers two different scenes (one scene in each button). It sends Scene_Save or Scene_Load depending on the duration of the action.
• Installaton in standard mechanism box, behind pushbutton.
• Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX DMS, RE KNX LE1 & RE KNX LE2.

The LoRaWAN WT201 Smart Thermostat is a device designed for use as an HVAC controller that supports a wide range of heating and cooling systems, including heat pumps, air conditioning, boilers, furnaces, AHUs, and PTAC devices. The WT201 Smart Thermostat supports several operating modes including hot/cold, emergent heat, automatic mode and fan mode, enabling precise temperature adjustment within buildings.
It allows automatic control via hourly scheduling and remote management via cloud. Real-time monitoring ensures timely alerts in case of sudden temperature changes, prioritizing the safety of people and protection of property. The device LoRaWAN WT201 Smart Thermostat has the capacity to store up to 1,000 records, ensuring extensive data security. With the 4.2-inch LCD screen and a built-in temperature sensor, the The LoRaWAN WT201 Smart Thermostat continuously displays the status of the room and ambient temperature. It also supports different time zones and summer/solar time. The thermostat integrates seamlessly with hotel room card management systems, enabling convenient remote management.

Thermo-LoRa Radiator Thermostat provides automatic and intelligent heating control based on accurate monitoring of room temperature. The Thermo-LoRa WT101 Smart Thermostatic Head can individually control temperatures room by room. By monitoring the room temperature, Thermo-LoRa Thermostat automatically regulates the amount of hot water entering the connected radiator. The Radiator Thermostat is a LoRaWAN device for automatic temperature control. The Radiator control device is equipped with heating plans , child lock, frost protection, open window detection and tamper alarm

HVAC LoRa Fan Controller is a touch screen chronothermostat with LoRaWAN technology. The HVAC device combines the functions of both a room thermostat and a timed Hot & Cold regulator. The HVAC LoRa Fan Controller will allow you to select different temperatures at 7 different times of the day or week. Furthermore, the HVAC LoRa device can be used both as a thermostat and as a clock. HVAC LoRa in thermostat mode is fully programmable. In fact, the HVAC Fan Controller allows you to make time and temperature settings. In clock mode the HVAC will simply perform an on-off regardless of the temperature. The LoRa chronothermostat is a device adopted for efficient energy saving. Available in white or black, (Specify when ordering).Dimensions (W/H/D) 96 * 86 * 13.8 (mm)

Display-LoRa IOT E-INK DS3604 is a reflective electrophoretic display that offers readability and flexibility. The 4.2-inch active area contains 400 x 300 pixels and has full 1-bit black/white/red display capability. The Display-LoRa IOT E-INK DS3604 supports displaying information in custom models and allows secondary development via interfaces. Display-LoRa IOT E-INK DS3604 has long capacity batteries and very low power consumption guarantee a long battery life, up to 5 years. Display-LoRa IOT E-INK allows you to quickly change the displayed contents remotely and locally through simple operations and allows bulk remote management. Additionally, DS3604 can be deployed in multiple ways and comply with standard LoRaWAN networks and gateways for more integrated applications.

LoRa-Display IoT Touch DS7610 offers customers a simple and intuitive experience of managing room conditions with one touch. As an advanced IoT solution, DS7610 comes with a built-in LoRaWAN gateway and NFC to manage Milesight LoRaWAN sensors. LoRa-Display IoT Touch DS7610 displays sensor data and status on the screen. Also, through the 10.1-inch capacitive touchscreen LoRa-Display IoT Touch DS7610 allows users to view and customize the user interface with simple settings. The DS7610's customizable, low-pitch RGBLED indicators can show real-time room availability even from a distance. LoRa-Display IoT also supports third-party Android applications, allowing users to install applications as needed, such as meeting room reservation systems, visitor appointment systems, intelligent toilet management systems, and more.

Repeater-LoRa Spider Bridge Relay is a LoRaWAN repeater for Ultrasonic Water Meter. The Repeater-LoRa is used to solve the communication problem between terminal devices and LoraWAN gateways. The Spider Bridge Relay works as an intermediary when the installation scenario is complicated by increasing the extension of the coverage range. The Repeater-LoRa Spider Bridge Relay can manage up to 15 devices. It is equipped with replaceable battery power supply and with integrated high-performance antenna. IP67 degree suitable for pole or wall installation. Support OTA update

The Ultrasonic Meteo LoRa Solar kit consists of a weather station, 20W solar panel, a 12Ah battery and pole bracket. The LoRa Solar Ultrasonic Meteo station detects 10 environmental parameters. The observation parameters of Ultrasonic Meteo LoRa Solar are PM10, PM2.5, wind direction and speed, temperature, humidity, atmospheric pressure, precipitation. Meteo Solar weather station can be used in urban environmental measurements, agricultural monitoring, industrial control etc..

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%
• PM10 0 to 1000ug / m3 1 ± 10%
• PM2.5 0 to 1000ug / m3 1 ± 10%
• Noise 30-130dB 0.1 ± 1.5dB

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

EAE Attuatore KNX SA108 – 8 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Attuatore KNX SA104 – 4 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Room Control Unit RCU0800 – 8 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installatio n of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1200 – 12 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers al l requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1600 – 16 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electr ical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU2000 – 20 Uscite 16A, Attuatore Multifunzione KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU0808 – 8 Uscite 16A, 8 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

EAE Room Control Unit RCU1616 – 16 Uscite 16A, 16 Ingressi KNX.

English description pending.

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

• Wireless 1-channel blind/shutter actuator or 2-channel switching actuator.
• Up to 16A switching capacity per channel with 2 free-voltage outputs.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Includes 2 auxiliary inputs which allow the local control.
• Dimensions: 107 x 53 x 34mm.
• 230V-operated.
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 002 & CO KNX 002.

• Wireless Temperature sensor transmitter with Probe for heating floors.
• It sends the temperature value in the place where the probe is installed.
• Specially-indicated for underfloor heating installations.
• Includes the following components:
  · Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
    receiver.
  · Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
    directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
    waterproof.
• The temperature value is sent every minute.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Power supply: 230V~ 50Hz.
• Dimensions: 45 x 42 x 12mm.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Wireless Luminosity value transmitter for Sun protection function.
• It is designed for the automatic control of shutters or blinds.
• According to the measured luminosity, it controls the raising or lowering of the shutters/ blinds to provide sun protection.
• Luminosity is measured by the sensor attached to the window with a sticker.
• Incorporates 4 different operation modes configurable by two small switches: Solar Alarm, Blind Control, Blind Control with manual lift and Lux Sensor.
• Dimensions: 78 x 28 x 23mm.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: PE KNX 001 & CO KNX 002.

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Two-point ON / OFF control
• Shutter Control (Heat Shut Off contact)
• Motion detector (intrusion)
• Thermoregulation with radiator control
• Remote Control (Optional)

• Communication with 8 IP cameras with 8 input and 8 output objects each
• Transfer of the camera events to the KNX bus
• Controlling the camera via the KNX bus
• KNX Bus Terminal and Ethernet / IP Connection (POE)
• Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
• Configuration via ETS 5

SynOhr® MultiSense KNX Premium:

• MultiSense KNX Standard command
• Self-sufficient Speech Recognition with 40 commands
• Speech recognition wildcard commands
• Monitoring of noise levels (as a baby monitor)
• Display of 28 characters with auto-scrolling on the dot matrix
• Use of the dot matrix on the display of icons
• Different Effects for the Ring and Ambient lightning
• Master/slave mode 

• Capacitive touch sensor for up to 25mm material size
• Three sensor panels enable button, double-click and wiping-gesture (acustic feedback customizable)
• Sensor panels can be used as one big panel
• Up to six switching options (acustic feedback customizable)
• Plastic housing (210x140x11 mm) robust against splash water
• Reset time programmable by switching timer
• KNX-Bus power required only

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

• Up to 48 telegrams/second routing performance
• Up to 35 telegrams/second tunnelling performance
• Up to five KNXnet/IP tunnel connections
• Integrated display
• 10/100 MBit Ethernet interface
• Power over Ethernet or ext. 16-24 AC or 20-30V DC
• Battery buffered RTC
• SNTP server
• Telnet server

• • Up to 48 telegrams/second routing performance
  • Up to 35 telegrams/second tunnelling performance
  • Up to five KNXnet/IP tunnel connections
  • Integrated display
  • 10/100 MBit Ethernet interface
  • Power over Ethernet or ext. 16-24 AC or 20-30V DC
  • Battery buffered RTC
  • SNTP server
  • Telnet server

IT is a bidirectional meter for measurement of active and reactive energy or power, respectively. Further it features an analysis of power supply quality.Measurements can be performed in a 3-phase system or in three independent 1-phase system.(current, voltage, active power, reactive power, active energy, reactive energy, power factor, THD-U, THD-I harmonics, unbalanced load, zero system current) 

voltage input: 230 V AC (50Hz)

output current: 960 mA

Integrated choke

LEDs for operation, bus reset and programming mode

Integrated bus-connection with voltage and current measurement

Data output on KNX bus via group object and visible on display

KNX objects for voltage, current and power measurements

KNX alarm functions

Housing temperature measurement

AUX with 600mA additional output