EAE Technology PS640 Power Supply Additional 30V DC Output

EAE EAE Technology PS640 Power Supply...

EAE KNX Power Supply - 640 mA version. Features an additional 30V DC output, NOT to power an additional KNX bus.

Input voltage range 150-275V AC, 50 60Hz
Output 1: KNX bus power with an integrated choke. (30VDC, SELV)
Output 2: Additional voltage output. (30VDC, SELV)
Short-circuit and overload protected outputs
LED indicators for Power, Overload and Reset status
On device reset with Reset Button

Download DATASHEET

Download MANUALE PRODOTTO

Download MANUALE INSTALLAZIONE

€210.00

EAE Technology IPR100 IP Router KNXnet/IP Connections

EAE EAE Technology IPR100 IP Router KNXnet/IP...

EAE KNX IP router is used as a line or backbone coupler to ensure communication between KNXnet/IP and TP KNX bus line. Electrical insulation is also achieved between the linked lines.

EAE KNX IP router is a tunneling and routing device. IPR100 is used as a gateway between IP and KNX bus line for commissioning and monitoring purposes. (It is also possible to simultaneously create 4 KNXnet/IP connections).
Simultaneous connection to two different KNX systems and transmission of telegrams between the local network and different buses
IP address assignment manually or by DHCP server
Option to block or allow telegrams between KNX and IP regarding configured filter table
Deactivation of filter table using on-device buttons for quick diagnosis
Functional status information with 6 LEDs on device

Download DATASHEET

Download MANUALE PRODOTTO

Download DATABAESE ETS

€485.00

DINUY RF KNX 2-CHANNEL ON/OFF / 1-CHANNEL BLIND/SHUTTER ACTUATOR

DINUY DINUY RF KNX 2-CHANNEL ON/OFF / 1-CHANNEL...

Wireless 1-channel blind/shutter actuator or 2-channel switching actuator.
Up to 16A switching capacity per channel with 2 free-voltage outputs.
Incorporates RF signal repeater function, which can be enabled or disabled as needed.
Includes 2 auxiliary inputs which allow the local control.
Dimensions: 107 x 53 x 34mm.
230V-operated.
Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 002 & CO KNX 002.

€188.20

DINUY RF KNX Temperature Sensor Probe Heating Floors

DINUY DINUY RF KNX Temperature Sensor Probe...

Wireless Temperature sensor transmitter with Probe for heating floors.
It sends the temperature value in the place where the probe is installed.
Specially-indicated for underfloor heating installations.
Includes the following components:
· Transmitter: captures the value from the temperature probe and transmits it via RF to the linked
receiver.
· Temperature probe: measures the temperature sensed at the tip of the probe. Must be connected
directly to the transmitter via its original cable, which is double insulated. Tip of the probe is
waterproof.
The temperature value is sent every minute.
Incorporates RF signal repeater function, which can be enabled or disabled as needed.
Power supply: 230V~ 50Hz.
Dimensions: 45 x 42 x 12mm.
Radio-frequency: 868,4MHz.
Range: up to 100m (in the free field).
Compatible with: TM KNX 001 & CO KNX 002.

€167.62

DINUY RF KNX WIRELESS BRIGHTNESS SENSOR FOR SOLAR PROTECTION

DINUY DINUY RF KNX WIRELESS BRIGHTNESS SENSOR...

Wireless Luminosity value transmitter for Sun protection function.
It is designed for the automatic control of shutters or blinds.
According to the measured luminosity, it controls the raising or lowering of the shutters/ blinds to provide sun protection.
Luminosity is measured by the sensor attached to the window with a sticker.
Incorporates 4 different operation modes configurable by two small switches: Solar Alarm, Blind Control, Blind Control with manual lift and Lux Sensor.
Dimensions: 78 x 28 x 23mm.
Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
Radio-frequency: 868,4MHz.
Range: up to 100m (in the free field).
Compatible with: PE KNX 001 & CO KNX 002.

€147.09

DINUY DINUY RF KNX TEMPERATURE SENSOR

Wireless Temperature value transmitter.
Sends the temperature value measured in the place when:
· The temperature value changes more than ±0,5ºC.
· 60 minutes after the last transmission.
· Pressing the inside link key.
Dimensions: 78 x 28 x 23mm.
Portable or wall fix mounted.
Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
Radio-frequency: 868,4MHz.
Range: up to 100m (in the free field).
Compatible with: TM KNX 001 & CO KNX 002.

€123.50

On sale!

Elsner E.E® KNX IP KNX Interface 8 IP Cameras

Communication with 8 IP cameras with 8 input and 8 output objects each
Transfer of the camera events to the KNX bus
Controlling the camera via the KNX bus
KNX Bus Terminal and Ethernet / IP Connection (POE)
Suitable for IP cameras that meet the communication requirements as described in the camera settings in the manual
Configuration via ETS 5

€315.00

Enertex® E.B® KNXnet/IP Router Home Automation (4DIN)

Up to 48 telegrams/second routing performance
Up to 35 telegrams/second tunnelling performance
Up to five KNXnet/IP tunnel connections
Integrated display
10/100 MBit Ethernet interface
Power over Ethernet or ext. 16-24 AC or 20-30V DC
Battery buffered RTC
SNTP server
Telnet server

€282.50

E.B® KNXnet/IP Interface KNX Home Automation (3 DIN)

Enertex® E.B® KNXnet/IP Interface KNX Home...

- Up to 48 telegrams/second routing performance
- Up to 35 telegrams/second tunnelling performance
- Up to five KNXnet/IP tunnel connections
- Integrated display
- 10/100 MBit Ethernet interface
- Power over Ethernet or ext. 16-24 AC or 20-30V DC
- Battery buffered RTC
- SNTP server
- Telnet server

€176.00

Enertex® KNX PowerSupply 960mA & Voltage Current Power Measurements

Enertex® Enertex® KNX PowerSupply 960mA & Voltage...

voltage input: 230 V AC (50Hz)

output current: 960 mA

Integrated choke

LEDs for operation, bus reset and programming mode

Integrated bus-connection with voltage and current measurement

Data output on KNX bus via group object and visible on display

KNX objects for voltage, current and power measurements

KNX alarm functions

Housing temperature measurement

AUX with 600mA additional output

€250.50

D.E AG EIB/KNX Power Supply 640mA (6 DIN)

On sale!

DATEC D.E AG EIB/KNX Power Supply 640mA (6 DIN)

The KNX POWER SUPPLY 640mA is a DIN Rail mounted KNX device with integrated choke, to directly power a KNX line. An auxiliary 30V output is available for some extra loads, as displays, binary inputs, …

€112.20

Interra KNX/USB Interface

The KNX USB interface ITR901-003 provides a galvanic isolated bidirectional connection to the bus system via KNX TP and USB. Network configurations become less time-consuming. The device is supplied by both the KNX TP line and USB. No additional external power supply is necessary.

Download DATASHEET

€210.00

shop by category

Home Domo Energy

New products

New products

Most View Product

Most View Product

e-Station Smart Ev Home...

E.B® KNX Smart Meter...

Bes Thermostat Temperature...

Contact us

Products

Our company

Soluzioni Integrate

Our privacy policy

1 What are cookies?

2 How we use cookies

3 Controlling Cookies

4 Information We Collect

shop by category

Home Domo Energy  

New products

New products  

Most View Product

Most View Product  

e-Station Smart Ev Home...

E.B® KNX Smart Meter...

Bes Thermostat Temperature...

1 What are cookies?

2 How we use cookies

3 Controlling Cookies

4 Information We Collect

Home Domo Energy

New products

Most View Product