Solar Roof Tile | New 30W Power Generator combines roof structure and clean energy production. The new generation 30W Solar Roof Tile looks nice and elegant on your roof. The Solar Roof Tile Generator Power Characterized by an IP67 degree, Class 4 anti-hail protection and fire protection with fire retardant grade A. The Roof Tile transforms your roof into a generator with a power of 30W per single unit. It is possible to replace the existing tiles in your home with solar tiles, obtaining a structural improvement and a better design. Size: 721*500*14mm (W*H*D, without junction box)

Fan Coil LoRaWAN Thermostat is an advanced touch screen room thermostat specifically developed to supervise the operation of fans and valves in air conditioning applications where a fan coil unit (FCU) is adopted. By continuously comparing the room temperature with the preset desired temperature, the Fan Coil LoRaWAN Thermostat allows both proactive management and automatic control based on predefined logic. This ensures the LoRaWAN Fan Coil Thermostat achieves optimal comfort and energy efficiency in the controlled environment. With wireless sensing and easy setup, the fan coil thermostat offers reliable and convenient optimization of room temperature arrangement. It is compatible with all standard LoRaWAN® gateways, enabling real-time monitoring of environmental status for effective remote management

Smart Farm Weather 6 Sensor Solar

The Smart Farm Weather 6 Ultrasonic Sensors kit with 5W solar controller for power supply. The Smart Farm Weather controller is equipped with analog / digital inputs. The main observation elements of Smart Farm wind direction, wind speed, temperature, humidity, atmospheric pressure, precipitation. The Smart Farm Weather station can be used in urban environmental measurements, agricultural monitoring, industrial control etc.

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%

The AgriLoRa Meteo10 Solar Ultrasonic Sensors kit with 5W solar controller for power supply. The controller is equipped with analog / digital inputs. TThe measuse of  AgriLoRa Meteo10 Solar  are PM10, PM2.5. It also measures wind direction, wind speed, temperature, humidity, atmospheric pressure, precipitation. The AgriLoRa Meteo10 Solar station can be used in urban environmental measurements, agricultural monitoring, industrial control etc.

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• Precipitation 0 to 4 mm / min 0.1mm 10%
• PM10 0 to 1000ug / m3 1 ± 10%
• PM2.5 0 to 1000ug / m3 1 ± 10%
• Irradiation from 0 to 2000W / m2 1W 5%
• Noise 30-130dB 0.1 ± 1.5dB

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

The Agri4.0 Meteo12 Solar Ultrasonic Sensors is a kit with 5W solar controller for power supply. UC501 controller is equipped with analog/digital inputs. The measuse of  Agri4.0 Meteo12 Solar are CO, O3, SO2, NO2, PM2.5, PM10. It also measures wind direction, wind speed, temperature, humidity, atmospheric pressure, precipitation. The Agri4.0 Meteo12 Solar station can be used in urban environmental measurements, agricultural monitoring, industrial control, etc.

• Temperature -40 to 60 ° C 0.01 ± 0.3 ℃ (25 ° C)
• Humidity 0 to 100% from 0.1 ± 3% RH
• Pressure 30-110kPa 0.1kPa ± 0.25%
• Wind speed [air] 0 to 60m / s 0.01 ± 0.1m / s
• Wind direction from 0 to 360 ° C 1 ° ± 2 ° C
• CO 0 to 10ppm 0.01 ± 5% F.S.
• SO2 0 to 5ppm 0.01 ± 5% F.S
• NO2 from 0 to 5ppm 0.01 ± 5% F.S
• O3 0 to 5ppm 0.1 ± 5% F.S
• Precipitation 0 to 4 mm / min 0.1mm 10%
• PM10 0 to 1000ug / m3 1 ± 10%
• PM2.5 0 to 1000ug / m3 1 ± 10%

Smart Current Transformer LoRaWAN is an intelligent current transformer for remote energy monitoring and consumption analysis. The CT10x Smart Current Transformer LoRaWAN device provides multiple current options to suit energy monitoring and supports sending threshold alarms. Smart Current Transformer LoRaWAN is compact size and clamp design allows it to be installed in any interior space quickly and safely without de-energizing a structure, simplifying installation and saving costs. The current transformer complies with all gateways on the market. Thanks to the Milesight LoRaWAN® gateway and Milesight IoT Cloud solution, CT10x can be monitored remotely via web page or mobile app. CT10x is used for electricity generation monitoring, smart building billing, machine failure detection and prevention, etc.

The 2.6" KNX smart touch panel fan coil thermostat controller is a multifunctional control panel. It has an elegant appearance, high quality aluminum frame, only 9mm thick body. The smart touch panel is equipped with temperature sensor, humidity, laser detection. Touch controller has 10 programmable pages in addition to the thermostat and fan coil function. Scenarios, dimmer, on\off switching, curtains, shutters, thermostat, customizable climatic conditions. The icons and language of the smart touch panel thermostat are modifiable via tool Setting of the laser detection sensor up to 120cm with switching objects and dimmers The touch panel requires an additional 12-24V (<50mA) power supply Fan coil thermostat mounting is done via a 55mm wall box Frame included (options: Black, Siver, Bronze)

The KNX RF BLUE IO 553 CC SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator KNX RF BLUE IO 553 CC SECURE can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The KNX RF BLUE IO 553 CC SECURE supports KNX Data Security.

The KNX RF BLUE IO 552 CV SECURE is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the KNX RF BLUE IO 552 CV SECURE includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

 RF USB INTERFACE KNX STICK 340 interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI. This RF USB INTERFACE KNX STICK 340 can be used to program KNX Secure devices with the ETS. The  RF USB INTERFACE KNX STICK 340 is compatible with ETS 5 (or higher). For software integration (Windows or Linux) of this interface the free SDK kDrive express is available. The power is supplied via the USB port.In addition to the telegram interface via cEMI, the KNX RF USB Interface Stick 340 includes a complete KNX Stack with communication objects and BAOS protocol V2. Thus, the stick offers the possibility to extend devices with USB connection to full KNX devices, which can even be programmed by ETS.

USB POWER SUPPLY 367 KNX Secure is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The USB POWER SUPPLY 367 KNX Secure device has a bus choke, an integrated USB interface (Micro USB connector) and additionally provides an output for auxiliary power supply. Via the integrated KNX node USB POWER SUPPLY 367 KNX monitors the output current, the bus voltage and the temperature in the switchgear. The 367 KNX Secure device has various logic functions for application purposes. The configuration of the 367 KNX Secure is done with the ETS (version 4.2 or later). An easy to read OLED display on the front panel allows the user to view the operating parameters locally on the USB POWER SUPPLY 367 KNX Secure. This USB interface can be used to program KNX Secure devices with the ETS.

Compact KNX actuator: 1 relay output 230V~/16A + 2 binary inputs galvanically isolated. KNX replacement for impulse switches. KNX Security. 1 DIN module. Art. 5327.

Compact KNX switching actuator with 2 bistable relay outputs 250V~/10A. Staircase function, heating actuator, integrated logic, KNX Security. 1 DIN module (18 mm). Art. 5444.

The KNX IP BAOS 777 is a powerful universal device for KNX installation: Thanks to the integrated web server, the device enables the visualization and control of buildings, rooms and functions in a standard web browser on a PC or mobile devices such as smartphones and tablets. The new, integrated e-mail function allows individual notification of several recipients, e.g. in case of status changes or an alarm. The integration of a Date & Time Server (NTP) makes it possible to obtain the date and time automatically via the Internet and to synchronize one’s own KNX installation. Extensive time functions allow the realisation of a powerful KNX time switch with weekly function.The configuration is done exclusively with the ETS software – no extra software or tool is required. The device also offers the function of a KNX IP interface (KNXnet/IP), for example as a programming interface for the ETS. Developers can access all functions via an API with BAOS RESTful Web Services. This allows the device to be used as an application-specific gateway, connecting the KNX bus to the existing IP infrastructure. The KNX IP BAOS 777 represents a powerful residential gateway for building control with smallest size and minimal power consumption.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode. EnOcean Secure can be enabled via pressing a key combination. By configuration with the ETS® the push button switches to KNX RF mode with optional support of KNX Data Security. Via a factory reset the device can be switched back to EnOcean protocol.

The KNX IP LineMaster 762.1 secure combines the essential functions of a KNX bus line: KNX power supply with choke, KNX IP router and KNX IP interface. In addition to the bus voltage the power supply offers an auxiliary voltage.

The KNX IP router in the KNX IP LineMaster 762.1 secure allows forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. Using the embedded KNX IP interface, the KNX line can be connected directly to a PC (e.g. by ETS). The device supports KNX Security which can be enabled in ETS. As secure router the device allows coupling of not secured communication on KNX TP to a secured IP backbone. Also for the interface functionality (unneling) KNX security prevents from unauthorized access. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNXnet/IP specification using the core, the device management, the tunneling and the routing part. The KNX IP LineMaster 762.1 secure has an extended filter table for main groupls 0 to 31 and is able to buffer up to 150 telegrams.

640mA BUS Power Supply DGS 366 (AUX 30V) is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA BUS Power Supply DGS 366 (AUX 30V) device has a bus choke and also provides an output for the auxiliary power supply. The integrated KNX node on the 640mA power supply monitors the output current, the bus voltage and the temperature in the switchboard. 640mA BUS Power Supply DGS 366 (AUX 30V) has several logic functions which are available for application purposes. The configuration of BUS DGS is done with the ETS (version 4.2 or later). An easy-to-read front panel OLED display on the DGS BUS allows the user to view operating parameters locally on the device.

The Blind Actuator KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked. The inputs Blind Actuator KNX IO 520 (1J2I) can be connected to conventional switches with an external voltage of 12 to 230 V. In the not configured state the binary inputs control the actuator channel. Via commissioning the device using ETS® software the binary inputs can be used independently. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output and input channels the Blind Actuator KNX IO 520 (1J2I) includes 16 independent functions for logic or timer control.

• ▪ 1 shutter output, 230 V∿, 8 A
• ▪ Drive directions electro-mechanically locked against each other
• ▪ For blinds, shutters or window drives
• ▪ Approach position via time calculation
• ▪ 2 inputs 12..230 V⎓∿, galvanically isolated
• ▪ Switching, dimming, shutters, scenes, pulse counter
• ▪ Integrated logic and timer functions
• ▪ Connections: KNX, plugable screw terminals for IO
• ▪ For DIN rail, width 1 unit (18 mm)

The Universal dimming actuator KNXIO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs. The dimming actuator supports phase control or phase section and is thus suitable for all dimmable 230 V lamps (eg incandescent lamps, dimmable LED lamps, halogen lamps). The dimming channel offers various comfort functions, including scenes, automatic, snooze function, staircase lighting and sequencer.The inputs of Universal dimming actuator KNXIO 530 (1D2I) can be controlled via conventional switches with an external voltage of 230 V. In addition to the output and input channels, the Universal dimming actuator KNXIO 530 (1D2I) contains 16 independent logic or timer functions. Two buttons and three LEDs on the front of the device allow local operation and visualization of the device status.

The 640mA power supply EIB produces and monitors the voltage for the KNX system.

The connection to the bus line takes place via a red/black terminal.

Also the bus line is decoupled from the p. supply with the integrated inductance.

Furthermore 640mA power supply EIB KNX is equipped with an auxiliary voltage of 30Vdc.

Also through the additional yellow/white connection terminal it powers the devices that need an additional voltage.

A status led indicates the correct functioning of the 640mA power supply EIB KNX.

4 modules DIN rail mounting.

The p.s. must be connected to the 230V p. line for correct operation.n.

Smart Touch panel 4" KNX have resolution of 480*480. It was made with elegant appearance, high-grade aluminum frame, body only 9mm thick. The Smart Touch panel 4" KNX integrated multifunction including dimming, switch, scene, curtain, air condition. IT support text, icon, layout,text customization. Are built-in temperature and humidity sensor, support laser function and human body sensing. The smart touch panel 4" KNX  can get weather information through external weather station. 

HCHO & Environmental Monitoring The AM300 Series Indoor E-Ink Display is a compact sensor for indoor use. The Environmental Sensor measures weather parameters such as temperature, humidity, light, barometric pressure. AM300 also detects the concentrations of volatile organic compounds CO2, level of HCHO / O3, TVOC, PM2.5, PM10. Finally, for a complete monitoring of the environment, it is equipped with Pir to detect the presence in the environment. The data will be displayed on the E-ink screen in real time, which helps to measure the indoor environment and comfort. AM300 series is widely used for office, shop, classroom, hospital, etc. Data from the HCHO sensor & E-Ink Display Environmental Monitoring is transmitted using LoRaWAN technology. By combining the Milesight LoRaWAN gateway and Milesight IoT Cloud, users can manage all sensor data remotely and visually.

The LED Dimming Actuator KNX IO 536 CC (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LLED Dimming Actuator KNX IO 536 CC (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 536 CC (4D) includes 16 independent functions for logic or timer control.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

• Universal Interface with 4 binary inputs and 4 LED outputs.
• The Universal Interface has 4 channels which can be parameterised as inputs or outputs, e.g. for
  connection of conventional pushbuttons, free-voltage motion detectors, etc.
• The interface can evaluate at its potential-free inputs up to 4 pushbutton/switch states with a
  common reference potential and send the corresponding telegrams.
• The telegrams may be for switching or dimming, blind/shutter control, value transmitter applications
  (light level, temperature,…), light scene control or pulse counting.
• As an alternative, the four channels can control four LEDs as independent outputs.
• The outputs are protected against short circuits, overload and wrong polarity.
• This device is flush mounted in a universal box, behind the pushbutton/switch.
• Dimensions: 38 x 42 x 15mm.
• Programming and commissioning by ETS4 or later.

The LED Dimming Actuator KNX IO 534 CV (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 outputs (constant current). The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. In LED Dimming Actuator KNX IO 534 CV (4D) several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control.

The LED Dimming Actuator KNX IO 532 (1D1O) is a compact combined dimming/switching actuator with 1 PWM dimming output for LEDs and 1 bi-stable relay output. The dimming actuator can be used e.g. for LED panels or stripes. Besides controlling the dimmer by switching, rel. dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function or staircase light.The LED Dimming Actuator KNX IO 532 (1D1O) provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives). Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output channels the LED Dimming Actuator KNX IO 532 (1D1O) includes 16 independent functions for logic or timer control. 

The USB INTERFACE KNX STICK 332 is a data interface between a PC or laptop and the KNX installation bus. USB INTERFACE KNX STICK 332can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames. Long telegrams enable a faster download to devices that can receive these telegrams.

The LEDs in the device indicate the operating status and communication errors on the bus. The USB connector is galvanic isolated from the KNX bus.

This USB INTERFACE KNX STICK 332 can be used to program KNX Secure devices with the ETS.

The KNX TP Blue IO 551 CC secure is a compact RGB / RGBW / Tunable White dimming actuator with 4 constant current dimming outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent dimmer channels. Every configuration allows controlling the channel by switching, rel. dimming and dimming value. Several comfort functions are integrated as well, including scenes, slumber fading, staircase light and sequencer. Two push buttons and five LEDs allow a local operation and a visualization of the device state. In addition to the output channels the device includes 16 independent functions for logic or timer control. The device supports KNX Data Security.

640mA Bus Power Supply 365 (AUX 30V) Modular 640mA line power supply with integrated isolation coil. The 640mA Bus Power Supply 365 (AUX 30V) can be installed in distribution boards on DIN rails with EIB / KNX bus connection terminal. Power Supply 365 is a high efficiency 640mA bus power supply with a small footprint of only 4 units (72 mm). The 640mA Bus Power Supply 365 (AUX 30V) has a built-in bus choke and also provides an output for the 30V auxiliary power supply. Three multicolored LEDs on the front indicate the conditions of the Power Supply 365 device. They signal overload with warning, temperature exceeding, telegram traffic and reset status. On 640mA The two buttons allow you to reset the KNX line.

Street Light Zhaga Led 100W DALI2 is a LED street floodlight for a reliable solution and for significant energy savings compared to conventional luminaires. Characterized by a luminous flux of 18000Lm, the Street Light Zhaga Led 100W DALI2 has a luminous efficiency of 180LM/W. Equipped of ENEC ENEC+ TUV CE CB IECEE SAA RoHS LM79 LM80 LM82 ISTMT TM21 IK08 IK10 certifications. The Street Light Zhaga Led 100W DALI2 has passed the photobiosafety test with 3G vibration, sand test, UV test, REACH L70B20 >100,000 hours. The Zhaga LED floodlight is suitable for street lighting, public area lighting, highway lighting, lighting applications of parking lots. Depending on the area, you can choose 100W led street light to replace 300W HPS, MH, HQI. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption.

Zhaga LoRaWAN controller included,

100W 5000K version

Nemo Flood Light Zhaga LED provides high-quality, high-efficiency LED lighting. The Nemo Flood Light Zhaga LED lamp is made of integrated aluminum material (ADC12) by die casting, light weight, excellent heat dissipation, high luminous efficiency. Due to its characteristics, Nemo Flood Light Zhaga LED is a projector with easy installation and low costs of transport. 100W, 150W, 200W options are available, very suitable for outdoor lighting applications. Optional professional beam angle 10, 30, 60, 90, 120, P45 (anti-glare), Type II (115x150 degrees), Type III (120X150 degrees). Nemo Flood Light Zhaga LED is suitable for exterior walls, billboards, green areas, shop signs. It finds its greatest use in sports fields, tunnels and parking areas. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption. High protection grade IP66 and IK08, 10KV overvoltage protection.

LoRaWAN Zhaga Controller included.

200w 5000K version

Conveyor Light Zhaga LED has been designed to provide the most energy efficient way to illuminate conveyor belts and industrial walkways. Thanks to the high efficiency of the entire lighting system, Conveyor Light Zhaga LED is able to provide the required minimum of 40 lux with an average of 80 lux. These values are obtained when the Zhaga LED Conveyor Lights are spaced 12 m apart with a typical installation height of 2.7m and 5 degree tilt. The robust design, great versatility and flexibility allow the Conveyor Light Zhaga LED adapts to many installations: cycle and pedestrian paths, walkways, camping areas, etc. The preparation with Zhaga connection and DALI2 driver allows remote control for automatic regulation and switching to substantially reduce energy consumption. High protection grade IP66 and IK08, 10KV overvoltage protection.LoRaWAN Zhaga Controller included

Electricity-LoRa Three Phase Meter 1/5A CT MID is an advanced multifunctional three-phase energy monitoring solution, with an integrated LoRaWAN module. The Three-Phase Meter transmits data wirelessly to any LoRaWAN gateway. Electricity-LoRa measures and displays the characteristics of three-phase three-wire (3p3w) and three-phase four-wire (3p4w) systems. The LoRaWAN MID Counter displays the parameters: KWh, kVArh, kW, kVAr, kVA, PF, Frequency, Voltage, Current, dmd. THD etc. Energy is measured in terms of kWh, kVArh. The maximum required current can be measured over preset periods of up to 60 minutes. The required current inputs are obtained via current transformers (CTs). Electricity-LoRa Three Phase Meter 1/5A CT MID can be configured to operate with a wide range of CTs, giving the unit a wide range of operations. The configuration is password protected.

Heat-LoRa Metering Ultrasonic DN15 is an innovative heat meter with static flow sensor based on the ultrasonic measuring principle with LoRaWAN technology. The Heat-LoRa Metering is designed to measure heat usage where water is the hot/cold carrier medium. Heat-LoRa meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the input and output of the system.Heat-LoRa Metering Ultrasonic also available in the DN20-25-32-40 version

• Pipe diameter : DN15
• Minimum flow rate, qi (m³/h) : 0.02
• Permanent flow rate, qp (m³/h) : 1.5
• Maximum flow rate, qs (m³/h) : 3.0
• Connection : G3/4'
• Length (mm) : 110
• Width (mm) : 96

• Eight completely programmable independent touch areas. 
• Includes a discretized PI regulator to achieve greater comfort and energy savings. 
• Built-in humidity sensor. 
• Dew point measurement according to relative humidity and temperature. 
• Arithmetic Logic Unit 
• Timers/counters.
• Also available in the White version

This 45W NFC DALI DT8 LED Driver is DALI-2 certified and in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and compatible with universal DALI masters that support DT8 commands. The driver  45W NFC DALI DT8 LED can be programmed with NFC programming APP or tool, the output current can be configured with 0.1mA stepping between 500-1400mA, which ensures high current accuracy and helps to reduce stocks. DALI configurations such as addressing, grouping, scene setting, power on level, system fail level, fade time, fade rate etc. can also be configured through NFC.With built-in DALI-2/Push interface, this  45W NFC DALI DT8 LED device is endowed with high power factor and efficiency. This dimmable driver has maximum output power of 45W. With class Ⅱ power supply and full isolated plastic case, this driver can switch and dim LED lighting fixtures. It features flicker free and deep dimming to 0.01%. Besides, it has error report function. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.

NFC 36W LED Driver DT8 CC is DALI-2 certified and in compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, and compatible with universal DALI masters that support DT8 commands. The driver can be programmed with NFC programming APP or tool, the output current can be configured with 0.1mA stepping between 350-1050mA, which ensures high current accuracy and helps to reduce stocks. DALI configurations such as addressing, grouping, scene setting, power on level, system fail level, fade time, fade rate etc. can also be configured through NFC.With built-in DALI-2/Push interface, this DALI DT8 device is endowed with high power factor and efficiency. This dimmable driver has maximum output power of 36W. With class Ⅱ power supply and full isolated plastic case, this driver can switch and dim LED lighting fixtures. It features flicker free and deep dimming to 0.01%. Besides, it has error report function. Its protection grade is IP20, which is suitable for indoor LED lighting applications, with 5-year warranty.

NFC LED Driver 60W DALI DT6 (Constant Current) is a DALI-2 DT6 certified long metal casing 60w dimmable LED driver. It is designed with 1 channel constant current output with adjustable current from 900mA to 1700mA by DIP switches, which enables it to be suitable for LED lights with different current. It is designed with 220-240VAC input. Power factor of the driver can be over 0.98 and efficiency is higher than 87%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. 1 DALI address can be manually assigned via buttons and showed on digital display or automatically assigned by DALI masters. Complying with IEC62386-101:2014, 102:2014, 207 ed.2, this DALI driver is compatible with DALI-2 certified application controllers and control devices.

SMART ENERGY METER  is a 5-80A 220V Class 1 50Hz IP51 degree Lorawan smart meter with a prepayment function. The communication is Lorawan and ttl, for Lorawan the frequency band is EU868MHz,and AS923MHz and US915MHz under preparation. It can measure the active energy, active power, voltage, current, frequency, power factor etc. With the built-in latching relay, it can cut off remotely when insufficient credit. Din rail installation hence it's easy to fit, LCD displaying, you can readout and paging by button. It's excellent for long-range communication and widely used in smart home and smart city.

SRP-2309-24-50CVT is a DALI-2 certified 50W LED driver with 4 parallel connected channels with 2 common anodes and 24VDC constant voltage output. It is designed with 100-240VAC universal input. Power factor of the driver can be over 0.9 and efficiency is higher than 90%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. 1 DALI address can be manually assigned via buttons and showed on digital display or automatically assigned by DALI masters. TUV and ENEC approval ensure safe and reliable performance of this driver. Complying with IEC62386-101:2014, 102:2014, 207 ed.2, this DALI driver is compatible with DALI-2 certified application controllers and control devices.

• Wireless Luminosity sensor transmitter with setpoint temperature value knob for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brightness value and the setpoint value to the lighting actuator.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

KNX Multi-Zone Heating Kit - 5 Zones with 5G LTE Remote Control

Pre-configured KNX kit for complete heating control across 5 independent zones. Includes 5G LTE router for remote access via smartphone, tablet or PC without relying on home Wi-Fi. Touch thermostats, 8-channel actuator, web server and full ETS programming included. Compatible with boilers and heat pumps. Eligible for Italian tax deduction Bonus Domotica 2026.

The components in the image are indicative.

Kit KNX "Multi-Zone Heating & Remote Control" controls the 2-point heating system distributed in 5 separate zones.For each zone, a thermostat and temperature sensor are provided, which through the actuator controls the opening and closing of the individual electrovalve and the boiler. The web server allows remote control of smartphones, PCs and tablets. 

LoRa-Water Metering Ultrasonic & Valve Control is an ultrasonic water meter with LoRaWAN technology. Provides an all-in-one smart water meter solution, offers measuring range ratio up to R400 (Q3/Q1). LoRa-Water Metering Ultrasonic & Valve Control is far better than the standard mechanical water meter. LoRa-Water Metering allows remote control of the valve to block the flow of water. The Ultrasonic Meter is designed for indoor installation in non-condensing environments with ambient temperatures from 5~55°C. The Valve Control meter has IP68 protection class which allows for long term submersion. Make sure that the meter is installed far enough away from possible sources of electromagnetic interference (switches, electric motors, fluorescent lamps, etc.). LoRa-Water Metering Ultrasonic & Valve Control Also available in the DN20 version

• Minimum Flow Rate, Q1 (m3/h) @R400 : 0.00625
• Permanent Flow Rate, Q3 (m3/h) : 2.5
• Connection : G3/4'
• Length (mm): 165
• Width (mm) : 90
• Height (mm) : 103
• Flow Meter Connector : R1/2'

IoT Controller I/O Solar Charging Multi-Interface Converter is an external LoRaWAN node controller used for acquiring data from multiple sensors. Contains various I / O interfaces such as analog inputs, digital inputs, digital outputs, serial ports. IoT Controller I/O Solar Charging Multi-Interface Converter r simplifies the implementation and replacement of LoRaWAN networks. UC501 I / O can be easily and quickly configured via NFC or wired USB port. IoT Controller I/O Solar Charging Multi-Interface Converter  is suitable for all internal and external applications. The UC501 I / O provides solar or integrated battery power and is equipped with an IP67 enclosure and M12 connectors. The I / O controller can be installed in harsh environments.

BCO-X Smart Ultrasonic Water Meter MID LoRaWAN is a new generation ultrasonic water meter. BCO-X has no moving parts, looks like IP68 and its body is made of durable brass material. This rugged design makes the BCO-X maintenance free and highly accurate throughout the flexible battery life of 10 or 15 years depending on customers requirements. Leak detection function within the meter aids troubleshooting, end of service and saving of the most important source of life, water. Versions available on request (DN20,DN25, DN32, DN40)

A 12 channel KNX actuatorfor monitoring electrical loads with outputs up to 16A.  The device provides the traditional switching functions, complete with notification of the state, stop command, timer functions and scenarios. It also has a set of logical functions consisting of 16 freely configurable communications objects (OR, AND, XOR). The outputs can be pre-set individually by ETS.  

A 8 channel KNX actuatorfor monitoring electrical loads with outputs up to 16A.  The device provides the traditional switching functions, complete with notification of the state, stop command, timer functions and scenarios. It also has a set of logical functions consisting of 16 freely configurable communications objects (OR, AND, XOR). The outputs can be pre-set individually by ETS.  

A 4 channel KNX actuatorfor monitoring electrical loads with outputs up to 16A.  The device provides the traditional switching functions, complete with notification of the state, stop command, timer functions and scenarios. It also has a set of logical functions consisting of 16 freely configurable communications objects (OR, AND, XOR). The outputs can be pre-set individually by ETS.  

The SDM230 series is an advanced single phase digital multifunction energy meter, measuring up to 100A of direct load. The unit measures active energy, reactive energy, current, voltage, power, power factor, frequency, demand, etc. Bi-directional metering makes this unit the ideal choice for solar photovoltaic metering. A remote communication port is provided, RS485 Modbus RTU and communication parameters are password protected in configuration mode. The user can check the data and set up the instrument via the buttons on the front panel. This series has been evaluated and certified as conforming to the requirements of the EC Directive 2004/22 / EC. The number of the EC type examination certificate is 0120 / SGS0206.

• MID B&D approved - 0120 / SGS0198
• Single phase (1P2W)
• Multifunction
• 100A AC
• 230V AC
• RS485 Modbus RTU
• Double pulse outputs
• 2 DIN module
• Backlit digital display
• 4 measurement modes for kW readings

Universal Input dimmer on-off up-down is used to connect the conventional buttons with the KNX system.The 4-channel KNX Universal Input dimmer on-off is equipped with outputs for 5Vdc status LEDs. While the 8-channel KNX Universal Input dimmer on-off up-down does not have the output for the LED lights. It is a multifunction device for controlling dimmers, on-off switching, movement of shutters and up-down shutters. In addition, the functions of impulse counter, scenario management, forcing values and sequences are provided. The extremely compact design allows you to place the device in a conventional 60mm box. The universal interface connects to the bus via the EIB connection terminals. Universal binary input interface uses no additional supply voltage. the physical address and parameter setting is done using the Engineering ETS design tools.

The Sensor On-Off Dim Up-Down KNX MicroWave is a dual technology infrared and microwave sensor. The sensor is used to detect the presence of moving people. It is possible to set the operation of the Sensor On-Off Dim Up-Down KNX or infrared only, microwave or both. It is also equipped with a brightness sensor with the possibility of setting the light source: internal, external. In the Sensor On-Off Dim Up-Down KNX the brightness function can be used alone or in combination with the detection function.When the brightness sensor is combined with detection it will be necessary that the requirements of both settings are met. The use of the sensor is suitable for residential, commercial and tertiary environments.

Light-Node LoRa Controller for use with ZHAGA socket luminaires meeting DALI-2 and D4i specifications. The Light-Node LoRa controller provides plug-and-play installation on the lamp. The Zhaga socket is a newer and more compact connector, specially developed for today's LED luminaires. The Light-Node LoRa controller is suitable for both outdoor and indoor installations. The Smart Controller Light-Node LoRaWAN allows the individual remote management of street lamps, projectors and all led lamps equipped with DALI-2 / D4i / Osram DEXAL / Philips SR drivers etc. Light-Node Smart Controller is designed and optimized for LoRaWAN ™ networks (long range RF wide area networks up to 15km). It is equipped with autonomous operation at predefined times with an integrated light level sensor. Monitoring of electrical parameters (measured by the DALI-2 D4i driver): V, W, A, Wh, PF, frequency etc. Light-Node LoraWAN reduces energy costs immediately by up to 35%. Results obtained thanks to intelligent switching on / off, targeted progressive dimming and efficient consumption management. Furthermore, the overall operating costs are reduced by up to 40% thanks to punctual maintenance.

Bidirectional KNX gateway for Daikin Sky & VRV. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKV001.

Bidirectional KNX gateway for Daikin Split. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKS001.

Bidirectional KNX gateway for Gree VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXGRV001.

Bidirectional KNX gateway for LG VRV systems. 16 math logic units, 3 A/D inputs, OTA firmware, vertical vane control, Scene & Timer modules, BMS integration. Ref. HTKNXLGV001.

Bidirectional KNX gateway for Mitsubishi Electric CN105 (split/multi-split). 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV002.

Bidirectional KNX gateway for Mitsubishi Electric TB15. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV001.

Bidirectional KNX gateway for Mitsubishi Heavy Industries VRF. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMHV001.

Bidirectional KNX gateway for Toshiba VRF & Digital systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXTOV001.

KNX / Modbus RTU RS-485 gateway with 250 data points, master (25 slaves) / slave, KNX Security, ETS configuration, bus-powered. 1 DIN module. Art. 5498.