KNX building automation is the automation of functions relating to electrical and technological systems. The KNX building automation system guarantees the best performance of the system in terms of safety, comfort and energy efficiency. Moreover building automation reduces operating times by modulating the power actually absorbed by adopting control strategies. Through KNX allows for scheduling, occupancy, gain, zoning. Furthermore, integrating, remoting, metering allow to reach a high degree of energy efficiency. Futhermore the bilding automation system is used in residential, tertiary, commercial, artisanal and public utility applications.
Active filters
Bidirectional KNX gateway for Daikin Sky & VRV. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKV001.
Bidirectional KNX gateway for Daikin Split. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXDKS001.
Bidirectional KNX gateway for Gree VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXGRV001.
Bidirectional KNX gateway for LG VRV systems. 16 math logic units, 3 A/D inputs, OTA firmware, vertical vane control, Scene & Timer modules, BMS integration. Ref. HTKNXLGV001.
Bidirectional KNX gateway for Mitsubishi Electric CN105 (split/multi-split). 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV002.
Bidirectional KNX gateway for Mitsubishi Electric TB15. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMEV001.
Bidirectional KNX gateway for Mitsubishi Heavy Industries VRF. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXMHV001.
Bidirectional KNX gateway for Toshiba VRF & Digital systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXTOV001.
Pre-configured KNX kit for complete heating control across 5 independent zones. Includes 5G LTE router for remote access via smartphone, tablet or PC without relying on home Wi-Fi. Touch thermostats, 8-channel actuator, web server and full ETS programming included. Compatible with boilers and heat pumps. Eligible for Italian tax deduction Bonus Domotica 2026.
The components in the image are indicative.
Kit KNX "Multi-Zone Heating & Remote Control" controls the 2-point heating system distributed in 5 separate zones.For each zone, a thermostat and temperature sensor are provided, which through the actuator controls the opening and closing of the individual electrovalve and the boiler. The web server allows remote control of smartphones, PCs and tablets.
The Enertex® LED PowerSupply 160W/48V supplies LED strips and DC loads with 48V DC at 160W. Ideal for long cable runs. DIN rail, parallel capable, self-healing protections.
The Enertex® LED PowerSupply 160W/24V supplies LED strips and DC loads with 24V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.
The Enertex® LED PowerSupply 160W/12V supplies LED strips and DC loads with 12V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.
Triple cover frame in white RAL9010 powder-coated aluminium for three adjacent Enertex MeTa KNX room controllers.
Triple cover frame in black anodized aluminium for three adjacent Enertex MeTa KNX room controllers.
Triple cover frame in natural brushed aluminium for three adjacent Enertex MeTa KNX room controllers.
Double cover frame in black anodized aluminium for two adjacent Enertex MeTa KNX room controllers.
Double cover frame in white RAL9010 powder-coated aluminium for two adjacent Enertex MeTa KNX room controllers.
Double cover frame in natural brushed aluminium for two adjacent Enertex MeTa KNX room controllers. Fits JUNG A and AS 500 series inserts.
Single cover frame in white RAL9010 powder-coated aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
Single cover frame in black anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
Single cover frame in natural brushed anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
The Enertex® ProxyTouch KNX is a capacitive touch sensor mountable behind ceramics, wood or glass (up to 25mm). 3 panels, gesture support, acoustic feedback, KNX Data Secure. Bus-powered.
The Enertex® KNX SmartMeter² 800A (Gen. 2) is a three-phase bidirectional energy meter with integrated energy management. Class 0.5, 1% accuracy, up to 800A, KNX Data Secure. ⚠ Available from 15/09/2026.
The Enertex® KNX SmartMeter² 85A (Gen. 2) is a bidirectional energy meter with integrated energy management. Class 0.5, 1% accuracy, up to 85A, KNX Data Secure. ⚠ Available from 15/09/2026.
The Enertex® KNX Dual PowerSupply 1280 integrates two independent KNX power supplies (1280mA + 320mA) and a 320mA AUX output in one 6-module DIN device. OLED, KNX Data Secure, RTC, time switch.
The Enertex® KNX PowerSupply 960³ provides 30V DC at 960mA (main KNX line) plus two independently protected 320mA AUX outputs. OLED display, KNX Data Secure, RTC, 64-entry time switch. DIN rail 6 modules.
The Enertex® KNX HV Dimmer (8-channel) is the most space-efficient 230V AC dimmer available: 8 channels in just 6 modules (250W/ch, 2000W total). All features of the 4-channel version. DIN rail.
The Enertex® KNX HV Dimmer (4-channel) dims 230V AC lamps at up to 250W/channel (1000W total). Automated lamp calibration, no LED ghosting, lamp failure detection, energy meter. DIN rail.
The Enertex® KNX LED Dimmsequenzer 20A/5x DK is the flush-mount version of the 5-channel PWM LED dimmer (20A/channel, 480W, 5–48V DC). For concealed installation in furniture and ceilings. KNX Data Secure.
The Enertex® KNX LED Dimmsequenzer 20A/5x REG is a 5-channel PWM LED dimmer for 5–48V DC loads (20A/channel, 480W total). RGBCCT, HCL, KNX Data Secure. DIN rail.
The Enertex® KNX TP Secure Coupler enables coupling of standard and secure TP lines with KNX Data Secure encrypted telegram routing. 49 telegrams/s, OLED display, topology error detection. DIN rail.
The Enertex® KNX IP Secure Interface provides encrypted KNX bus access over LAN with KNX IP Secure + Data Secure. Up to 4 simultaneous ETS tunneling sessions. DIN rail.
The Enertex® KNX IP Secure Router interconnects KNX TP lines over IP with dual KNX IP Secure + Data Secure encryption. Up to 49 telegrams/s, OLED display, topology error detection. DIN rail.
The Enertex® MeTa² KNX Standard white RAL9010. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard black anodized. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard gold finish. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard offers full KNX room control at a competitive price. 2 rockers, TFT IPS color display, KNX Data Secure, switching/dimming/shutters/HVAC/scenes. Bus-powered.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® ViTa KNX (JUNG LS series insert) is a 60 GHz radar presence detector in push-button design — wall mounted, no ceiling installation. Up to 10 m frontal range, temperature/humidity/brightness sensors. ⚠ Available from 01/05/2026.
The Enertex® ViTa KNX is a 60 GHz radar presence detector built into a wall push button — no ceiling mount required. 3 detection zones, up to 10 m frontal range, temperature/humidity/brightness sensors. ⚠ Available from 01/05/2026.
The Enertex® ENA² is the professional KNX security and remote access device: encrypted VPN access, KNX telegram logger (~100M entries) and protected network zone. DIN rail, bus-powered.
The Enertex® EibPC² without NP option is the KNX logic controller with integrated KNX IP interface and KNX Data Secure. All automation functions included — web visualization upgradeable via software license.
The Enertex® EibPC² with NP option is the reference KNX logic controller and web visualization platform for professional home automation. DIN rail (4 modules), bus-powered, integrated KNX IP interface.
Bidirectional KNX gateway for Samsung NASA with individual control of up to 16 indoor units. 16 math logic units, 3 A/D inputs, OTA firmware, Scene & Timer modules, BMS integration. Ref. HTKNXSMS001.
Universal KNX infrared gateway with bidirectional synchronisation. 64 IR codes, 3 physical IR outputs, 8-step macros, dedicated AC module, 8 math logic units, KNX Data Secure. Ref. HTKNXIRC001.
Bidirectional KNX gateway for Midea Commercial & VRF systems. 16 math logic units, 3 A/D inputs, OTA firmware update, Scene & Timer modules, BMS integration. Ref. HTKNXMDVxx2.
| Pack Quantity | 100 pz. |
|---|---|
| Type | 221 |
| Article Part No. | 221-412 |
| Flexible section (max.) | 4 mm² |
| Category | Clamp |
| Connection | Spring |
| Color | Trasparent, Orange |
| Insulation material | Plastic |
| Rigid cross-section (min.) | 0.2 mm² |
| Length - Depth | 18.6 mm |
| Nom. Voltage | 450 V |
| Stripping length | 11 mm |
| Compatibile RoHS | Sì |
| Flexible section (min.) | 0.14 mm² |
| Pol2 | 2 |
| AWG | 24 - 12 |
| Width | 13.1 mm |
| Current | 32 A |
| Temperature range | fino a +105 °C |
| Rigid cross-section (max.) | 4 mm² |
English
Italiano
