KNX building automation is the automation of functions relating to electrical and technological systems. The KNX building automation system guarantees the best performance of the system in terms of safety, comfort and energy efficiency. Moreover building automation reduces operating times by modulating the power actually absorbed by adopting control strategies. Through KNX allows for scheduling, occupancy, gain, zoning. Furthermore, integrating, remoting, metering allow to reach a high degree of energy efficiency. Futhermore the bilding automation system is used in residential, tertiary, commercial, artisanal and public utility applications.
Active filters
Ingresso Binario KNX DATEC 1630.03160/62100 – 8 Canali da Incasso con 8 LED di Stato.
English description pending.
Attuatore KNX Motor Control DATEC 1630.03141/65100 – Comando Ventilatore a Soffitto da Incasso 230VAC 100W.
English description pending.
The Enertex® LED PowerSupply 160W/48V supplies LED strips and DC loads with 48V DC at 160W. Ideal for long cable runs. DIN rail, parallel capable, self-healing protections.
The Enertex® LED PowerSupply 160W/24V supplies LED strips and DC loads with 24V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.
The Enertex® LED PowerSupply 160W/12V supplies LED strips and DC loads with 12V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.
Triple cover frame in white RAL9010 powder-coated aluminium for three adjacent Enertex MeTa KNX room controllers.
Triple cover frame in black anodized aluminium for three adjacent Enertex MeTa KNX room controllers.
Triple cover frame in natural brushed aluminium for three adjacent Enertex MeTa KNX room controllers.
Double cover frame in black anodized aluminium for two adjacent Enertex MeTa KNX room controllers.
Double cover frame in white RAL9010 powder-coated aluminium for two adjacent Enertex MeTa KNX room controllers.
Double cover frame in natural brushed aluminium for two adjacent Enertex MeTa KNX room controllers. Fits JUNG A and AS 500 series inserts.
Single cover frame in white RAL9010 powder-coated aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
Single cover frame in black anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
Single cover frame in natural brushed anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.
The Enertex® ProxyTouch KNX is a capacitive touch sensor mountable behind ceramics, wood or glass (up to 25mm). 3 panels, gesture support, acoustic feedback, KNX Data Secure. Bus-powered.
The Enertex® KNX SmartMeter² 800A (Gen. 2) is a three-phase bidirectional energy meter with integrated energy management. Class 0.5, 1% accuracy, up to 800A, KNX Data Secure. ⚠ Available from 15/09/2026.
The Enertex® KNX SmartMeter² 85A (Gen. 2) is a bidirectional energy meter with integrated energy management. Class 0.5, 1% accuracy, up to 85A, KNX Data Secure. ⚠ Available from 15/09/2026.
The Enertex® KNX Dual PowerSupply 1280 integrates two independent KNX power supplies (1280mA + 320mA) and a 320mA AUX output in one 6-module DIN device. OLED, KNX Data Secure, RTC, time switch.
The Enertex® KNX PowerSupply 960³ provides 30V DC at 960mA (main KNX line) plus two independently protected 320mA AUX outputs. OLED display, KNX Data Secure, RTC, 64-entry time switch. DIN rail 6 modules.
The Enertex® KNX HV Dimmer (8-channel) is the most space-efficient 230V AC dimmer available: 8 channels in just 6 modules (250W/ch, 2000W total). All features of the 4-channel version. DIN rail.
The Enertex® KNX HV Dimmer (4-channel) dims 230V AC lamps at up to 250W/channel (1000W total). Automated lamp calibration, no LED ghosting, lamp failure detection, energy meter. DIN rail.
The Enertex® KNX LED Dimmsequenzer 20A/5x DK is the flush-mount version of the 5-channel PWM LED dimmer (20A/channel, 480W, 5–48V DC). For concealed installation in furniture and ceilings. KNX Data Secure.
The Enertex® KNX LED Dimmsequenzer 20A/5x REG is a 5-channel PWM LED dimmer for 5–48V DC loads (20A/channel, 480W total). RGBCCT, HCL, KNX Data Secure. DIN rail.
The Enertex® KNX TP Secure Coupler enables coupling of standard and secure TP lines with KNX Data Secure encrypted telegram routing. 49 telegrams/s, OLED display, topology error detection. DIN rail.
The Enertex® KNX IP Secure Interface provides encrypted KNX bus access over LAN with KNX IP Secure + Data Secure. Up to 4 simultaneous ETS tunneling sessions. DIN rail.
The Enertex® KNX IP Secure Router interconnects KNX TP lines over IP with dual KNX IP Secure + Data Secure encryption. Up to 49 telegrams/s, OLED display, topology error detection. DIN rail.
The Enertex® MeTa² KNX Standard white RAL9010. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard black anodized. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard gold finish. Full KNX room controller functions, 2 rockers, TFT IPS display, KNX Data Secure. Bus-powered.
The Enertex® MeTa² KNX Standard offers full KNX room control at a competitive price. 2 rockers, TFT IPS color display, KNX Data Secure, switching/dimming/shutters/HVAC/scenes. Bus-powered.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® MeTa² KNX Premium is the high-end KNX room controller with up to four electronically inscribable rockers, a high-resolution TFT IPS color display and comprehensive room control functions.
The Enertex® ViTa KNX (JUNG LS series insert) is a 60 GHz radar presence detector in push-button design — wall mounted, no ceiling installation. Up to 10 m frontal range, temperature/humidity/brightness sensors. ⚠ Available from 01/05/2026.
The Enertex® ViTa KNX is a 60 GHz radar presence detector built into a wall push button — no ceiling mount required. 3 detection zones, up to 10 m frontal range, temperature/humidity/brightness sensors. ⚠ Available from 01/05/2026.
The Enertex® ENA² is the professional KNX security and remote access device: encrypted VPN access, KNX telegram logger (~100M entries) and protected network zone. DIN rail, bus-powered.
The Enertex® EibPC² without NP option is the KNX logic controller with integrated KNX IP interface and KNX Data Secure. All automation functions included — web visualization upgradeable via software license.
The Enertex® EibPC² with NP option is the reference KNX logic controller and web visualization platform for professional home automation. DIN rail (4 modules), bus-powered, integrated KNX IP interface.
EAE Attuatore Fan Coil FCA100 KNX – Controllo Ventilconvettori 2/4 Tubi, Valvola Triac/0-10V.
English description pending.
EAE Multi Input/Output MIO1616 – 16 Ingressi e 16 Uscite KNX per Pulsanti e Spie.
English description pending.
EAE Interfaccia Universale KNX UI108 – 8 Canali, 6 Modalità Operative.
English description pending.
Colored connection cables
Flush mounted into switch boxes
Does not require an external power supply
8 input channels with each featuring following functions:
Download DATASHEET
Download MANUALE PRODOTTO
Download MANUALE INSTALLAZIONE
Download DATABASE ETS
EAE Attuatore KNX SA108 – 8 Canali 16A, Corrente di Spunto 500A.
English description pending.
In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.
8 independently configurable channels
Manual control for each relay on the device using slide switches
Does not require an external power supply
Electric current control can be configured
Following functions can be defined separately for each channel:
Download DATASHEET
Download MANUALE
Download DATABASE ETS
EAE Attuatore KNX SA104 – 4 Canali 16A, Corrente di Spunto 500A.
English description pending.
In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.
4 independently configurable channels
Manual control for each relay on the device using slide switches
Does not require an external power supply
Electric current control can be configured
Following functions can be defined separately for each channel:
Download DATASHEET
Download MANUALE
Download DATABASE ETS
iSwitch is a wall-mounting room controller device for on/off switching of loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. The product is equipped with integrated temperature sensor, humidity sensor and ambient sensor. iSwitch can act as a room probe or thermostat, both in heating and cooling mode.Body gateway included
| Pack Quantity | 100 pz. |
|---|---|
| Type | 221 |
| Article Part No. | 221-412 |
| Flexible section (max.) | 4 mm² |
| Category | Clamp |
| Connection | Spring |
| Color | Trasparent, Orange |
| Insulation material | Plastic |
| Rigid cross-section (min.) | 0.2 mm² |
| Length - Depth | 18.6 mm |
| Nom. Voltage | 450 V |
| Stripping length | 11 mm |
| Compatibile RoHS | Sì |
| Flexible section (min.) | 0.14 mm² |
| Pol2 | 2 |
| AWG | 24 - 12 |
| Width | 13.1 mm |
| Current | 32 A |
| Temperature range | fino a +105 °C |
| Rigid cross-section (max.) | 4 mm² |
It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply.
It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply.
Uscita Analogica KNX DATEC 1630.02131/57100 – 4 Canali 0-10V DIN per Valvole, Ventilazione e Motori.
English description pending.
Attuatore Dimmer KNX Weinzierl IO 530 (1D2I) – 1 Canale Dimmer 230V + 2 Ingressi Binari, 1TE.
English description pending.
The Universal dimming actuator KNXIO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs. The dimming actuator supports phase control or phase section and is thus suitable for all dimmable 230 V lamps (eg incandescent lamps, dimmable LED lamps, halogen lamps). The dimming channel offers various comfort functions, including scenes, automatic, snooze function, staircase lighting and sequencer.The inputs of Universal dimming actuator KNXIO 530 (1D2I) can be controlled via conventional switches with an external voltage of 230 V. In addition to the output and input channels, the Universal dimming actuator KNXIO 530 (1D2I) contains 16 independent logic or timer functions. Two buttons and three LEDs on the front of the device allow local operation and visualization of the device status.
The Blind Actuator KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked. The inputs Blind Actuator KNX IO 520 (1J2I) can be connected to conventional switches with an external voltage of 12 to 230 V. In the not configured state the binary inputs control the actuator channel. Via commissioning the device using ETS® software the binary inputs can be used independently. Two push buttons and three LEDs allow a local operation and a visualization of the device state. In addition to the output and input channels the Blind Actuator KNX IO 520 (1J2I) includes 16 independent functions for logic or timer control.
English
Italiano
