The panel has been designed to show all controls on a single page including 8 (up to 32 into 4 pages). It also includes a specific interface for climate control with an internal thermostat. The ability of the panel to generate a wifi network to allow it to be controlled locally from any iOS or Android device, simply by downloading the official Ingenium applications. 

Attuatore KNX Motor Control DATEC 1630.03141/65100 – Comando Ventilatore a Soffitto da Incasso 230VAC 100W.

English description pending.

The Enertex® LED PowerSupply 160W/48V supplies LED strips and DC loads with 48V DC at 160W. Ideal for long cable runs. DIN rail, parallel capable, self-healing protections.

The Enertex® LED PowerSupply 160W/24V supplies LED strips and DC loads with 24V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.

The Enertex® LED PowerSupply 160W/12V supplies LED strips and DC loads with 12V DC at 160W. DIN rail, parallel capable, self-healing protections. Optimized for Enertex KNX LED dimmers.

Triple cover frame in white RAL9010 powder-coated aluminium for three adjacent Enertex MeTa KNX room controllers.

Triple cover frame in black anodized aluminium for three adjacent Enertex MeTa KNX room controllers.

Triple cover frame in natural brushed aluminium for three adjacent Enertex MeTa KNX room controllers.

Double cover frame in black anodized aluminium for two adjacent Enertex MeTa KNX room controllers.

Double cover frame in white RAL9010 powder-coated aluminium for two adjacent Enertex MeTa KNX room controllers.

Double cover frame in natural brushed aluminium for two adjacent Enertex MeTa KNX room controllers. Fits JUNG A and AS 500 series inserts.

Single cover frame in white RAL9010 powder-coated aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.

Single cover frame in black anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.

Single cover frame in natural brushed anodized aluminium for Enertex MeTa KNX room controller. Fits JUNG A and AS 500 series inserts.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

The webserver all

ows to control a KNX installation using an iOS, Android or Samsung Smart TV devices remotely through the Ingenium server or a PC connected to the internet with any type of web browser. This webserver has Wi-Fi connectivity and 1 Ethernet port (10 Mbit/sec). The control applications are completely free.  

Download IL DATASHEET

Download IL MANUALE

Download IL SOFTWARE 

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

English description pending.

KNX EnOcean 636 Secure Gateway is a bidirectional gateway between EnOcean wireless devices and the KNX bus. With the KNX EnOcean 636, commands and measured values from wireless EnOcean sensors can be transmitted to the KNX bus. It allows both KNX actuators and EnOcean actuators to be controlled via the KNX bus. The KNX EnOcean 636 Secure Gateway supports encrypted radio communication with security-enabled EnOcean devices. In addition, the Secure Gateway provides control and logic functions and includes a wireless repeater. The KNX EnOcean 636 supports more than 100 profiles with its 32 radio channels. Enables easy and secure connection of various KNX devices and EnOcean sensors and actuators. Commissioning is as simple as usual: With all 32 channels, encryption can be activated individually. Subsequently EnOcean sensors and actuators, which support safety, can be taught in. The user gets more safety without loss of comfort.

EAE Attuatore Fan Coil FCA100 KNX – Controllo Ventilconvettori 2/4 Tubi, Valvola Triac/0-10V.

English description pending.

Thinka for KNX allows you control your home with Siri and Alexa.

Thinka allows you to manage your lights, switches, curtains, (Venetian) blinds and climate control. And it reads sensors such as temperature, humidity, CO2, motion, contact and occupancy.

You can use Apple's Home App on your iPhone or iPad to switch on lights, close the curtains or turn up the heat. Or do it all at once with HomeKit scenes. And share with all people in your household.

The Thinka is typically installed on the DIN-rail, connected to KNX via twisted pair, Ethernet and power. 

Scarica MANUALE 

Video    INSTALLAZIONE

Video    PROGRAMMAZIONE

EAE Attuatore KNX SA108 – 8 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA108 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

8 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

EAE Attuatore KNX SA104 – 4 Canali 16A, Corrente di Spunto 500A.

English description pending.

In addition to switching resistive loads, SA104 is designed to be used with capacitive and inductive loads, enabling a convenient control of fluorescent ballasts and led drivers.

4 independently configurable channels

Manual control for each relay on the device using slide switches

Does not require an external power supply

Electric current control can be configured

Following functions can be defined separately for each channel:

• Stair function
• External logic
• Internal logic
• Priority function
• Threshold function
• Transaction time
• Sweep function

Download   DATASHEET

Download   MANUALE 

Download   DATABASE ETS

iSwitch is a wall-mounting room controller with LCD device for on/off switching of loads, dimming of lighting devices, control of motor drives or other programmable switching and control functions. The product is equipped with integrated temperature sensor, humidity sensor and ambient sensor. iSwitch can act as a room probe or thermostat, both in heating and cooling mode.Body gateway included

SynOhr® MultiSense KNX Premium:

• MultiSense KNX Standard command
• Self-sufficient Speech Recognition with 40 commands
• Speech recognition wildcard commands
• Monitoring of noise levels (as a baby monitor)
• Display of 28 characters with auto-scrolling on the dot matrix
• Use of the dot matrix on the display of icons
• Different Effects for the Ring and Ambient lightning
• Master/slave mode 

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

It is able to drive a 5 A per channel, 12-24 VDC LED strip – that is a sum of 480 Watt dimming power or 120 Watt for each channel for 24 V LEDs.In device additionally a 16 A switching actuator with two timers is integrated. Thus, the LED power supply is powered on by the actuator if needed or turned off to minimize standby losses of the LED power supply. 

Miniserver KNX IP Blumotix BX-MS02 – Server DIN per Supervisione e Controllo Remoto Domotica.

English description pending.

K24 is the code to identify second generation of our Kairos 4 inch touch panel.The electronic system has been completely redesigned for improved performance and to have a significant costs reduction.Like the previous version this device has an internal KNX interface that allows connection directly to the bus cable. 

K24 is the code to identify second generation of our Kairos 4 inch touch panel.The electronic system has been completely redesigned for improved performance and to have a significant costs reduction.Like the previous version this device has an internal KNX interface that allows connection directly to the bus cable. 

Theo 7 touch panel comes programmed with a standard graphic display pre-set for controlling the Lights, Windows and Climate. Other functions can be added and browsed through, such as utility Loads control, Video camera control, Timer and Chrono Thermostat enabling and Scenario programming.