KNX / Modbus TCP gateway with 250 data points, master/slave mode, KNX Security, 8 KNXnet/IP tunnels, ETS configuration. Bus-powered. Art. 5425.

Bidirectional KNX / DMX512 gateway up to 64 channels, master and slave mode, RGB/RGBW, 4 sequencers, ETS configuration. 1 DIN module. Art. 5358.

KNX/IP object server with 1000 data points, BAOS Binary V2 Secure, KNX Security, 8 tunnels, 10 BAOS connections, bus-powered. 1 DIN module. Art. 5475.

KNXnet/IP router with KNX Security, 8 tunnels, Long Frames, filter 0..31, 150-telegram buffer. Recommended for new installations. 1 DIN module. Art. 5249.

KNXnet/IP router with routing and tunneling (5 tunnels), filter table 0..31, 150-telegram buffer, bus-powered. Available while stock lasts. Art. 5243.

KNXnet/IP WiFi interface with KNX Security, 6 tunnels, WPA2, integrated access point. ETS programming without LAN cable. Bus-powered. Art. 5537.

KNXnet/IP interface with KNX Security, 8 tunnels, Long Frames, bus-powered. Recommended for new installations. 1 DIN module (18 mm). Art. 5248.

KNXnet/IP programming interface via LAN (5 tunnels). Bus-powered, 1 DIN module (18 mm). Available while stock lasts. Art. 5242.

KNX 0/1..10V / 50 mA dimmer for ECG ballasts + bistable relay 250V~/10A. Compatible with 0..10V valves, scenes, KNX Security. 1 DIN module. Art. 5337.

KNX LED dimmer with PWM output 12..24V/6A + bistable relay 250V~/10A. Scenes, staircase, KNX Security, direct ETS control. Art. 5503.

KNX universal dimmer 230V~/200W (phase/phase-cut) + 2 inputs, LED retrofit and halogen compatible, scenes, KNX Security. 1 DIN module. Art. 5516.

KNX shutter actuator 1 channel 230V~/8A + 2 isolated inputs. Position via time calculation, direct ETS control, KNX Security. 1 DIN module. Art. 5515.

KNX binary input 4 channels for potential dry contacts with KNX Security, integrated logic and timer. 1 DIN module (18 mm). Art. 5514.

KNX binary input 4 channels 12..230 V (DC/AC) with galvanic isolation and KNX Security. Switching, dimming, shutters, scenes. 1 DIN module (18 mm). Art. 5513.

DIN rail KNX USB interface (1 module, 18 mm) for ETS programming. BAOS Protocol V2 Secure, KNX Long Frames, USB Type C. Art. 5501.

Compact KNX TP/TP line coupler (1 DIN module, 18 mm) with KNX Security, Security Proxy, galvanic isolation and extended filter table main group 0..31. Art. 5451.

KNX shutter actuator 6-channel 230V~/16A with electro-mechanical interlock, KNX Security and direct ETS control. KNX Block IO platform, DIN 6 modules (108 mm). Art. 5496.

KNX switching actuator with 12 outputs 230V~/16A on DIN rail (72 mm). Central power supply, KNX Security, mains failure detection. Weinzierl KNX Block IO platform.

AgRi-NPK LoRa Soil Sensor Detects the concentrations of nitrogen (NH2), phosphorus (H3PO4) and potassium (K) in the soil. These elements are necessary to evaluate the fertility status of the soil. The NPK sensor is suitable for all types of soil. This sensor can be buried long term with excellent resistance to electrolysis and corrosion. Furthermore, AgRi-NPK Soil Sensor is completely waterproof. AgRi-NPK LoRa Soil Sensor has the characteristics of a large measuring range, good linearity, convenient use, easy installation. Thanks to the LoraWAN transmission it allows a long distance signal coverage. The fields of application are innumerable: shed for greenhouses, flowers and vegetables. Also it can be used for grass pasture, quick soil measurement, vegetable cultivation.

AgRi-PH LoRa Soil Sensor It measures the pH (3-9pH) of the soil. Soil pH plays an important role in plant growth. Plants can normally grow in a wide range, but various plants have their own suitable pH. Reasonable control of the soil pH value promotes healthy crop growth. In addition, the Soil Sensor is used for the treatment of waste water in aqueous solution. AgRi-PH LoRa Soil Sensor has the characteristics of a wide measuring range, good linearity, convenient use, easy installation, long transmission distance thanks to the LoRaWAN protocol. The AgRi-PH sensor is used in countless applications: water-saving agricultural irrigation, meteorological monitoring; greenhouses, flowers and vegetables. Soil test; fields that require soil moisture measurement, such as plant cultivation and scientific experiments.

Agri-EC LoRa Soil Sensor Three-in-one sensor is suitable for measuring soil temperature and moisture as well as the total salt content of the soil (conductivity). Three-in-one soil sensors measure salinity, humidity and temperature together, greatly facilitating the customer's system evaluation of soil conditions. Agri-EC LoRa Soil Sensor can be long-term buried in the soil, long-term electrolysis resistance, corrosion resistance, vacuum filling, completely waterproof.The fields of application of Agri-EC LoRa Soil Sensor know countless: scientific experiments , water-saving irrigation, shed for greenhouses, flowers and vegetables. Also it can be used for grass pastures, quick soil measurement, plant cultivation, wastewater treatment, grain storage.

• Range is 30dB~120dB;Sensitivity: ±0.5db
• The sensitivity of NB-IoT module is 129 dBm±1 dB, excellent penetration, the network coverage is 20dB stronger than GSM, LTE and other networks.
• Support the communication protocol frequency band published by the international organization agreement 3GPP.
• Support two kinds of configuration for data transmission.Single-tone transmission,15kHz/3.75kHz Subcarrier interval:25.2kbps(Downlink) , 15.625kbps(Uplink);Multi-tone transmission, 15kHz Subcarrier interval:25.2kbps(Downlink),54kbps(Uplink)
• Switch freely between Active/Idle/PSM modes, and ensure that the un-received data is retransmitted.
• Support IPv4/IPv6/UDP/CoAP/LwM2M/Non-IP/DTLS/TCP/MQTT protocol stack.
• Intelligent terminal provides multi-function interface (MPI), it can be connected with external analog and digital quantity sensors. 
• Integrated internal antenna or optional external SMA/IPEX antenna.
• OTA firmware upgrade, including to upgrade loader and application images
• Support wide voltage 5~12V DC input, 5 – 10 years of battery operational life with 2 x AA Li-SOCI2 Battery.
• IP67 enclosure rating. 
• When ordering, specify the LoRaWAN or NB-IOT version

OUTDOOR version available on request.

It is device, for Heating or Cooling applications in offices, hotel rooms and much more.The fancoil can be used in Analog 0-10VDC or PWM mode. The fancoil actuator is able to drive up to three fan speeds and an additional 230VAC relay output.The device has two physical inputs, the first for connecting a local temperature sensor and the second to be used as binary input or as window contact input. 

It is a flush mounted device,for ceiling fan applications in offices, hotel rooms..It is used for varying ceiling fan speed as determined by KNX input or control systems.Also,speed can be varied by push buttons directly connected to the MOTOR CONTROL device.The ceiling fan must be of standard motor type, without control electronics. If using multiple speed fans, always force fan in max speed.

The 6KW Accumulation Single-Phase PV Kit for network connection is composed of inverter, Huawei LUNA lithium battery storage and power meter. The Huawei single-phase inverters of the SUN2000 series (Smart Energy Center) are Huawei's hybrid solution for residential photovoltaic systems connected to the network. The new photovoltaic battery with lithium-iron-phosphate technology and modular design, scalable from 5 to 30 kWh

The 4KW 5KW Accumulation Single-Phase PV Kit for network connection is composed of inverter, Huawei LUNA lithium battery storage and power meter. The Huawei single-phase inverters of the SUN2000 series (Smart Energy Center) are Huawei's hybrid solution for residential photovoltaic systems connected to the network. The new photovoltaic battery with lithium-iron-phosphate technology and modular design, scalable from 5 to 30 kWh

The 4KW 5KW Accumulation Single-Phase PV Kit for network connection is composed of inverter, Huawei LUNA lithium battery storage and power meter. The Huawei single-phase inverters of the SUN2000 series (Smart Energy Center) are Huawei's hybrid solution for residential photovoltaic systems connected to the network. The new photovoltaic battery with lithium-iron-phosphate technology and modular design, scalable from 5 to 30 kWh

The 3KW 5KW Accumulation Single-Phase PV Kit for network connection is composed of inverter, Huawei LUNA lithium battery storage and power meter. The Huawei single-phase inverters of the SUN2000 series (Smart Energy Center) are Huawei's hybrid solution for residential photovoltaic systems connected to the network. The new photovoltaic battery with lithium-iron-phosphate technology and modular design, scalable from 5 to 30 kWh

• Temperature sensor 0 to 51 ° C
• Temperature Controller: 2 points, or continuous PWM
• PI control algorithm
• Control system hot / main heat output and additional on/off
• Flush mounting in box with vented cap mechanism
• Simple logic unit  

The  Binary Input Universal Interfaces achieve the functional applications via conventional push buttons/switches, communicate by technical binary, which are used to control the devices such as the Dimmer Actuator/the Relay Actuator, to control domestic appliance indirectly. At the same time, they also enable the control of LEDs. The extremely compact design enables the device to be inserted in a conventional 60 mm wiring box or another type can be installed in the distribution boards on 35mm mounting rails according to EN60715. 

The Universal Interfaces have many functions that can be used in a wide variety of application areas. The following list provides an overview:

---Switching and dimming function.

---Control of blinds and shutters.

---Sending of values e.g. temperature values、water line.

---Invocate and storing of scenes.

---Trigger an LED for reporting an operation.

---Operation of various loads by multiple push button actions.

---Operation of several loads in a fixed switching sequence.

---Standard counting and differential counting.

Each channel of a device can adopt any of the functions described above.

• The KNX RF / TP coupler is a compact KNX Radio coupler. Connect the KNX RF devices of a radio line with the KNX Twisted Pair Bus.
• You have a filter table (8k bytes).
• Supports long frames compatible with ETS® ETS5 or higher software.
• The keys on the front allow you to disable the telegram filter for testing purposes.
• The LEDs indicate the operating conditions and communication errors on the KNX bus.
• The power supply is supplied via the KNX bus (main line).
• Programming and commissioning using ETS5 or later.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

IoT-LoRa Controller UC300 is used for remote control and data acquisition from different devices. The Controller UC300 controller contains multiple I/O interfaces. IoT-LoRa Controller has analog input, digital input, relay output, serial port, PT100RTD input. The inputs of the IoT-LoRa Controller UC300 support remote device data transmission via LoRaWAN. UC300 LoRaWAN supports multiple trigger conditions and actions that can work autonomously. The automations are guaranteed even in the event of a grid failure. Combined with Milesight IoT Cloud solution, it can easily monitor and control remote devices via web server or mobile app. IoT-LoRa Controller UC300 features industrial design and IP30 metal case. UC300 is widely used in building automation, industry 4.0 etc applications

Gas-LoRa Ultrasonic Smart Meter V2 G-2.5 is an ultrasonic gas meter (therefore with low insertion loss) based on LoRaWAN technology. The Smart Meter is ideal for prepaid gas supply services (Pay per Use). Thanks to the Gas-LoRa shut-off valve Ultrasonic Smart Meter can interrupt the gas supply. The Ultrasonic Smart Meter allows monitoring of the achievement of the maximum budget foreseen or of anomalous data (possible losses). Gas-LoRa is the ideal device also for Building Automation systems where hourly consumption monitoring is required. Gas-LoRa Ultrasonic Smart Meter is mainly suitable for charge control of natural gas, liquefied petroleum gas, biogas and other gases with working pressure of 0.5-20kPa. This product complies with the GB/T 39841-2021 standard.

SRP-2309-12-100CVF is a DALI-2 certified 100W LED driver with 4 parallel connected channels with 2 common anodes and 24VDC constant voltage output. It is designed with 100-240VAC universal input. Power factor of the driver can be over 0.9 and efficiency is higher than 90%. It enables smooth and deep dimming to 0.1% without flickering and buzzing noise. 1 DALI address can be manually assigned via buttons and showed on digital display or automatically assigned by DALI masters. TUV and ENEC approval ensure safe and reliable performance of this driver. Complying with IEC62386-101:2014, 102:2014, 207 ed.2, this DALI driver is compatible with DALI-2 certified application controllers and control devices.

• 2 Regulation channels for LED lighti ng 
• 2 low voltage input (SELV) for pushbutton (non programmable) 
• 8 Programmable scenes executed from bus commands 
• Remote enable / disable of bus control
• Overload circuit protection and thermal protection 
• Digital regulation control based on microcontroller with more than 200 regulation points 
• Last position memory in case of power failure 

The panel has been designed to show all controls on a single page including 8 (up to 32 into 4 pages). It also includes a specific interface for climate control with an internal thermostat. The ability of the panel to generate a wifi network to allow it to be controlled locally from any iOS or Android device, simply by downloading the official Ingenium applications. 

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Wireless Temperature value transmitter.
• Sends the temperature value measured in the place when:
  · The temperature value changes more than ±0,5ºC.
  · 60 minutes after the last transmission.
  · Pressing the inside link key.
• Dimensions: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Battery-operated, 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• Wireless 1-channel Thermostat actuator for HVAC control.
• It incorporates a potentiometer which allows setting the desired temperature avoiding any undesired manipulation.
• Every time it receives a signal of temperature from the sensor it will be compared with the already set in the thermostat and will act accordingly on its relay.
• It also can receive telegrams from door/window contacts or presence detectors.
• Up to 16A switching capacity with free-voltage relay.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• Modular installation device. DIN-rail mounting. 1-module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: SE KNX 001, SE KNX 003, SE KNX 004, DP KNX 001 & CO KNX 002.

• Wireless 1-channel Switch actuator for general purpose.
• Up to 16A switching capacity with non-free voltage output.
  Two different operation modes:
  · Switch ON/OFF.
  · Timer: 3sec ~ 5min.
• Incorporates RF signal repeater function, which can be enabled or disabled as needed.
• A conventional pushbutton can be wired for local control.
• DIN-rail mounting. Dimensions: 1 module wide.
• 230V-operated.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: EM KNX 002, PU KNX 001, RC KNX 001, SE KNX 003, DM KNX 001, DM KNX 002 & CO KNX 002.

• Wireless Temperature sensor with desired temperature value control knob.
• This sensor sends the following variables:
  · Measured temperature value.
  · Temperature setpoint value.
  · State (Standby or Auto).
• Incorporates a wheel to set the desired temperature in the room.
• Battery-operated: 1 x 3V Lithium battery CR2450. Useful life higher than 8 years.
• Dimensions: 80 x 30 x 26mm.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: TM KNX 001 & CO KNX 002.

• The Radio Remote Control sends KNX telegrams when one of the keys is presse depending on its parameterisation.
• The KNX-RF hand-held remote control transmits KNX telegrams wirelessly when the key is pressed.These could include telegrams for switching, dimming, blind/shutter control or lighting scenes saving/recovering.
• Incorporates 5 independent channels, 1 main channel and 5 scene channels.
• Battery-operated: 1 x 3V Lithium battery CR2032. Useful life higher than 8 years.
• Power supply: 1X3V baterry CR2032. Useful life: > 8 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.

• One channel interface for 2-fold pushbutton.
• Dimmer: Connects, disconnects or dims the linked actuator. It sends ON/OFF or Dimming_Up/Dimming_Down depending on which of the two buttons is pressed the duration of the action.
• Blinds/Shutters: Controls a linked blind actuator. It sends Step_Up/Step_DOwn or Move_Up/Move_Down depending on which of the two buttons is pressed and the duration of the action.
• Scenes: Saves and recovers two different scenes (one scene in each button). It sends Scene_Save or Scene_Load depending on the duration of the action.
• Installaton in standard mechanism box, behind pushbutton.
• Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX DMS, RE KNX LE1 & RE KNX LE2.

SR-2309PRO-5C is a 7 in 1 professional multi-addresses enabled DALI DT8 control gear which is compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2, IEC 62386-209:2011. It is DALI DT8 device with built-in DALI-2 interface. Multi addresses are enabled in this control gear, which means it integrates multi DALI DT8 devices in on control gear. It can be set as single address type or multi-addresses type. The combination of device types can be configured with the buttons and display, and total 7 combinations available: Tc, RGBWAF, XY, 2*Tc, XY+Tc, RGB+Tc, XY+W (DT6).

4G IoT Controller UC300 is an industrial interface with 6AI/4DI/2DO/1xRS232/1xRS48. The 4G IoT Controller UC300 series is an IoT controller used for remote control and data acquisition from different devices and sensors. Contains multiple I/O interfaces including analog input, digital input, relay output, serial port, PT100RTD input, which support remote device data transmission via 3G/4G networks. In addition, the 4G IoT Controller series supports multiple triggering conditions and actions which can work autonomously even when the network goes down. Combined with Milesight IoTCloud solution, 4G IoT Controller UC300 can easily monitor and control remote devices via web server or mobile app. Adopting industrial design and IP30 metal case, UC300 is widely used in indoor applications such as smart factory, building automation.

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

Room Control Unit covers all requirements of the electrical installation of room applications and offers following functions in a one product.

• Switching lighting
• Switching loads
• Controlling AC/DC blinds
• Controlling fan coils (2 & 3 point valve)
• Dry contact inputs

Suitable for switching resistive, capacitive and inductive loads as well as fluorescent lamp loads according to EN 60 669. As a switch output device provides following function list:

• Staircase
• External logic
• Internal logic 
• Priority
• Threshold
• Operating hour
• Sweep

Input channel operates as universal interface with following functions :

• Switch / push button input 
• Dimmer control 
• Control of shutter/blinds 
• Value sending 
• Scene control 
• Counter for count pulse

Download DATASHEET

Download DATABASE ETS

• Universal dimmer for: incandescent or 230V halogen lamps, LV halogen lamps with electronic or inductive transformer and 230V or 12V ~ (with electronic transformer) dimmable LED lamps.
• Leading or trailing edge dimming technology.
• Control:
  • Pushbutton (wired),With memory: the lamps are switched on at previous level before being switched-off, the lamps are switched on at maximum level.
  • Wireless (KNX-RF), Remote control (RC KNX 01), Transmitter for pushbutton (EM KNX 002) or any other KNX-RF compatible transmitter.
• Installation into junction box.
• Wireless Master/Slave configuration: it is possible to enlarge the load capacity with one wired pushbutton and several dimmers RE KNX LE1

• Wireless flush-ceiling mounted Infrared PIR motion detector for lighting, heating and air conditioning control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• It has 2 operation modes:
  · Motion detector: useful for lighting control. The time delay must be set on the actuator. Compatible with the actuators: IT KNX 001, MI KNX 001 & CO KNX 002.
  · Presence detector: useful for heating and air conditioning control.
• Compatible with the actuators: TM KNX 001 & CO KNX 002.
• Incorporates Temperature sensor
• Coverage: 360º and Ø7m at 2,5m high.
• Battery-operated, 1 x 3V Lithium battery LS14250. Useful life higher than 4 years.
• Radio-frequency: 868,4MHz.

• Wireless Luminosity sensor transmitter for daylight control.
• It is designed for the automatic control of lighting depending on the natural light.
• It sends the existing brigthness value to the lighting actuator for constant light control operation.
• Battery-operated: 2 x 3V Lithium batteries CR2032. Useful life higher than 8 years.
• Dimensions: 78 x 28 x 23mm.
• Compatible with: RE KNX 102, RE KNX DA2 & CO KNX 002.

Integrates an indoor Daikin climate unit  with KNX system.Five operating modes (auto, heat, cold,  ventilation and dry). Three fan speeds (low, medium, high). Includes energy saving mode. Arithmetic-logic unit and timers/counters. 

Relamping 4x36W  Fluorescent

Input Voltage: AC200-240V or AC100-277V

LED Chip: Epistar 2835 130-140lm/w

CRI: >82

IP / IK Level: IP66, IK10

PF>0.95

Lens Angle: 120°

Function: Emergency 2 hours 3 hours, Microwave Sensor, Motion/PIR Sensor, 1-10V Dimmable

Material: T5-6063 Aluminum housing

Life time: 50,000 hours

Weight: 3 KG

Warranty: 5 Years

Working Temperature: -30° ~ +65°C

Industry-LoRa Solenoid Valve Controller UC511 is a controller for solenoid valves. The UC511 Industry-LoRa Solenoid Controller is used to remotely control the valve's DC closing solenoids. The LoRaWAN Solenoid Valve Controller contains 2 solenoid interfaces and 2 GPIO interfaces, which can be easily controlled locally or remotely. In addition to the ultra-low power LoRaWAN technology, the UC511 Industry-LoRa Series Solenoid Valve Controller also features a built-in solar panel and high-capacity battery power supply for long-term operation. The Solenoid Actuator is for outdoor applications, features an IP67 rated enclosure and M12 connectors to protect it from water and dust in harsh environments.

WS558 is a LoRaWAN Smart Light Controller for the monitoring and control of lights. With 2 light circuit types and 8 switches, WS558 can fit in different rooms without the need for rewiringsand reduce the renovation costs. Besides LoRaWAN , WS558 Smart Light Controller can be controlled whithout agateway via Milesight D2D communication protocol. WS558 Smart Light Controller can be widely used for wireless control of indoor lights, fans, heaters, machines, etc. Power data and switch status of the Controller are transmitted via LoRaWAN protocol. The LoRaWAN technology enables encrypted radio transmissions over long distances while consumingverylittle power. Also, users can check visualized data of the Controller through Milesight IoT Cloud or the user’s own Application Server.

IBox CoWork Kit offers a smart building monitoring and control solution with LoRaWAN technology. The IBox CoWork Kit easy to install and includes a series of sensors, gateways and cloud platform. IBox CoWork Kit can transform your environment into an intelligent, interconnected and comfortable space. The Kit consists of the following sensors:

• VS121 AI Workplace Sensor
• WS156 LoRaWAN® Smart Scene Panel
• UG63 Mini LoRaWAN Gateway
• WS101 LoRaWAN Smart Button
• WS202 PIR & Light Sensor
• WS301 Magnetic Contact Switch

IBox Smart Building Kit offers a smart building monitoring and control solution with LoRaWAN technology. The Kit is easy to install and includes a series of sensors, gateways and cloud platform. IBox Smart Building Kit can transform your environment into an intelligent, interconnected and comfortable space. The Kit consists of the following sensors:

• UC300 IoT Controller
• UG65 LoRaWAN Gateway
• EM300 Environment Monitoring Sensor
• WS101 LoRaWAN Smart Button
• WS301 Magnetic Contact Switch
• AM103 Indoor Ambience Monitoring Sensor

The Kit is compliant with legacy equipment / sensors. IBox Smart Building Kit covers comp

iBox IAQ Kit offers a smart building monitoring and control solution with LoRaWAN technology. iBox IAQ Kit is easy to install and includes a set of sensors, gateways and cloud platform. This iBox IAQ Kit can transform your environment into a smart, interconnected and comfortable space. The iBox LoRaWAN Kit consists of the following sensors:

• AM307 7-in-1 IAQ Sensor
• AM319 9-in-1 IAQ Sensor
• AM103 3-in-1 IAQ Sensor
• AM103L 3-in-1 IAQ Sensor
• UG63 Mini LoRaWAN Gateway

Basic functionality of the TP line coupler ITR901-002 is coupling two KNX TP lines (main line and subline) providing galvanic isolation in between. Due to its flexibility ITR901-002 coupler unit can be used as KNX line coupler or KNX area coupler (to connect a TP line to a TP area or backbone) or KNX repeater (without filtering). Operational and filtering states, malfunction and faulty communication are indicated by LEDs. 

Download  DATASHEET

Download DATABASE ETS

Relamping 4x36W  Fluorescent

Input Voltage: AC200-240V or AC100-277V

LED Chip: Epistar 2835 130-140lm/w

CRI: >82

IP / IK Level: IP66, IK10

PF>0.95

Lens Angle: 120°

Function: Emergency 2 hours 3 hours, Microwave Sensor, Motion/PIR Sensor, 1-10V Dimmable

Material: T5-6063 Aluminum housing

Life time: 50,000 hours

Weight: 3 KG

Warranty: 5 Years

Working Temperature: -30° ~ +65°C

• Wireless wall-mounted Infrared PIR motion detector for lighting control.
• Built-in light sensor, allowing to limit the operation of the detector to daylight.
• As soon as it detects movement, the sensor sends the ON signal to the linked receiver and its
  contact keeps closed. The ON time must be set on the receiver.
• Wall or ceiling mounting installation.
• Coverage: 180º and Ø10m at 2m high.
• Power Supply: 2 x 3V AA Lithium batteries L91. Working life over 15 years.
• Radio-frequency: 868,4MHz.
• Range: up to 100m (in the free field).
• Compatible with: IT KNX 001, MI KNX 001 & CO KNX 002.

• The 1-channel Pushbutton sends KNX telegrams when the button is pressed depending on its parameterisation through its switches.
• The device provides functions like switching or dimming of lighting, moving of blinds and shutters,managing scenes,…
• Dimensións: 78 x 28 x 23mm.
• Portable or wall fix mounted.
• Switch ON / OFF & Toggle: connects, disconnects or switches the linked actuator. It sends On / OFF / Toggle depending on the configuration.
• Dimmer: connects, disconnects or dims the linked actuator. It sends On / Off / Toggle or Dimming_Up / Dimming_ Down depending on the configuration.
• Blinds / Shutters: controls a linked blind actuator. It sends Step_Up / Step¨_Down or Move_Up / Move_ Down depending on the configuration.
• Scenes: saves and recovers one scene (0…4) depending on the configuration.
• Battery-operated: 2 x 3V Lithium batteries CR2025. Useful life higher than 8 years.
  Compatible with: CO KNX 001, IT KNX 001, CO KNX 002, PE KNX 001, MI KNX 001, RE KNX LE1,RE KNX LE2, RE KNX LE3, RE KNX RGB, RE KNX 010 & RE KNX DA1.

Bi-directional communication gateway between KNX protocol and Fermax Smile Dominium video intercom.Allows to control and manage KNX devices from the Smile Dominium video intercom, using a project uploaded from the SiDEKNX software.Direct connection to the Fermax Smile Dominium video entry system and the KNX bus.  

It is possible to adjust the presence sensor sensitivity in an easy way,selecting between 3 different levels or personalizing by yourself.It includes parameters to define regulation steps,to establish deviations, or to calibrate it.It is also possible to change between auto and manual mode, defining the behavior when it changes between those two options.It also includes an additional thermostat 

Capacitive push-button with 4 independent touch areas, completely programmable.LED indicator associated with each touch areas. Square format. Universal distribution box size. In-built temperature sensor to measure and to send the information to KNX BUS. 

• Supply: 29V DC from KNX BUS
• Size: 88 x 88 x 8mm
• Mounted on universal box, screwed on wall

The webserver all

ows to control a KNX installation using an iOS, Android or Samsung Smart TV devices remotely through the Ingenium server or a PC connected to the internet with any type of web browser. This webserver has Wi-Fi connectivity and 1 Ethernet port (10 Mbit/sec). The control applications are completely free.  

Download IL DATASHEET

Download IL MANUALE

Download IL SOFTWARE 

Power Supply KNX max Current 320mA. Input Voltage 230/110 VAC – 50/60Hz.

BX-DM03 is a 4-channels dimmer actuator for LED lamps with current-mode control.The channels can be programmed to work independently with white lamps or can be synchronized to drive the color of a RGB / RGBW lamp.Each channel can be programmed via dip switches to supply the current for the type of lamp installed in accordance with the predetermined standard values: 350mA, 700mA and 1000mA.

BX-2XIO is a 4-channels push button interface used to acquire external commands.This is the new push-button interface equipped with outputs for monitoring the warning LEDs found in modern domestic series. .The device provides control functions for load control, the opening and closing of shutters, the adjustment of a light source and the selection of scenarios. 

BX-MFB12 is a multifunction 12-channels actuator, programmable with ETS to perform different tasks like switching loads, open and close shutters and blinds, drive valves operating in PWM and control 2 or 4 pipe fancoil.Each outputs uses bistable relays with 16A maximal load. Block terminals are very wide to insert wires with a section up to 5 mm2.

A KNX device for measuring Alternating Electrical Current. This device measures the alternating current absorbed on an electrical line and indirectly provides the power values that can be used to determine the amount of electrical power consumed.The 3 channels can be programmed independently by ETS to carry out energy saving operations. Current clamps not included 

Kristall offers all the safety and durability advantages of a capacitive keyboard, since there is no mechanical wear of any kind, and ease of use is improved with the introduction of luminous and acoustic feedback.Kristall offers the complete KNX command set needed to control any type of device: On/Off commands, light dimming, window actions and transmission of scenarios.

Kristall offers all the safety and durability advantages of a capacitive keyboard, since there is no mechanical wear of any kind, and ease of use is improved with the introduction of luminous and acoustic feedback.Kristall offers the complete KNX command set needed to control any type of device: On/Off commands, light dimming, window actions and transmission of scenarios.

The Enertex® LED PowerSupply 160W/48V supplies LED strips and DC loads with 48V DC at 160W. Ideal for long cable runs. DIN rail, parallel capable, self-healing protections.